Nissan 370Z Forum
Page 9 of 11 « First 78 9 1011
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Who else on here is on the list for BP’s new twin kit? (http://www.the370z.com/forced-induction/135083-who-else-here-list-bp-s-new-twin-kit.html)

tiller 09-30-2021 04:41 AM
Quote:
Originally Posted by cwrenny (Post 4010285)
I'm looking to get in on the next build of this kit, is this setup CMAK compatible? Just starting to price out the supporting mods
Yes

cwrenny 09-30-2021 07:52 AM
Quote:
Originally Posted by tiller (Post 4010315)
Yes
Perfect. thanks!

Does anyone have any reviews/ feedback to offer yet?

tiller 09-30-2021 07:51 PM
Quote:
Originally Posted by cwrenny (Post 4010327)
Perfect. thanks!

Does anyone have any reviews/ feedback to offer yet?
Iam running twin 58mm at 13lbs on e85, so far it’s great, got the car on the road in August, great all around kit and so far about 1000miles on the comp oiless turbos, there holding up so far. I have the cmak also.

Nvrdun 09-30-2021 08:23 PM
Quote:
Originally Posted by tiller (Post 4010378)
Iam running twin 58mm at 13lbs on e85, so far it’s great, got the car on the road in August, great all around kit and so far about 1000miles on the comp oiless turbos, there holding up so far. I have the cmak also.
Hows the driver side piping looking? And do you have a under shroud?

Sent from my SM-N950U using Tapatalk

GrayGhost 09-30-2021 09:14 PM
Quote:
Originally Posted by tiller (Post 4010378)
Iam running twin 58mm at 13lbs on e85, so far it’s great, got the car on the road in August, great all around kit and so far about 1000miles on the comp oiless turbos, there holding up so far. I have the cmak also.

Do you have a dyno chart?


Sent from my iPhone using Tapatalk

tiller 10-01-2021 07:57 AM
Quote:
Originally Posted by Nvrdun (Post 4010380)
Hows the driver side piping looking? And do you have a under shroud?

Sent from my SM-N950U using Tapatalk
Drivers side piping was fun to say the least but it takes a lot adjustment to get it right. I did mine on a hoist and it was still a pain.

Yes I retained my oem plastic skid plate but had to cut 2 small areas below the intercooler at each end of it due to its height.

tiller 10-01-2021 07:59 AM
Quote:
Originally Posted by GrayGhost (Post 4010383)
Do you have a dyno chart?


Sent from my iPhone using Tapatalk
No dyno nearby, about 8 hour drive to nearest one for me here in Canada and we are in the fall season with winter right around the corner. But seat of my pants feeling is real good.

cwrenny 10-04-2021 07:23 AM
Quote:
Originally Posted by tiller (Post 4010418)
No dyno nearby, about 8 hour drive to nearest one for me here in Canada and we are in the fall season with winter right around the corner. But seat of my pants feeling is real good.
Hey tiller, I'm in Ontario as well (Barrie area), where are you getting your E85? Closest place I could find with it at the pumps is Gen7 Fuel in Roseneath.

tiller 10-04-2021 07:31 PM
Quote:
Originally Posted by cwrenny (Post 4010595)
Hey tiller, I'm in Ontario as well (Barrie area), where are you getting your E85? Closest place I could find with it at the pumps is Gen7 Fuel in Roseneath.
Awesome, your not far then, I am in Sault Ste. Marie, I get Vp x85 from the vp rep in Sudbury, 54gallons drums, not cheap but if you wanna play you gotta pay.

cwrenny 10-05-2021 03:45 PM
Quote:
Originally Posted by tiller (Post 4010639)
Awesome, your not far then, I am in Sault Ste. Marie, I get Vp x85 from the vp rep in Sudbury, 54gallons drums, not cheap but if you wanna play you gotta pay.
Oh true, no not too far! Ya, i heard it's not cheap but definitely well worth it.

xxAGAVExx 12-24-2021 03:00 PM
Anyone else get their kits installed? I ran into an issue with passenger side piping fitting and just haven’t had time to work on it recently, looking for some inspiration to get back under there.


Sent from my iPhone using Tapatalk

tiller 12-27-2021 12:29 PM
Quote:
Originally Posted by xxAGAVExx (Post 4016628)
Anyone else get their kits installed? I ran into an issue with passenger side piping fitting and just haven’t had time to work on it recently, looking for some inspiration to get back under there.


Sent from my iPhone using Tapatalk
I think I may Be the only one with the twin kit installed and tuned on my z so far? Aside from Sasha

The piping WAS frustrating but the twin setup on this platform feels natural and all the swearing was worth it so far.

Iam at the point where I need twin fuel pumps, but we also kinda hit the point of max engine torque that the stock bottom end can handle. Time to source a donor block to build next.

Nvrdun 01-10-2022 10:34 PM
Quote:
Originally Posted by xxAGAVExx (Post 4016628)
Anyone else get their kits installed? I ran into an issue with passenger side piping fitting and just haven’t had time to work on it recently, looking for some inspiration to get back under there.


Sent from my iPhone using Tapatalk
I have it installed, waiting for a tune, upstate NY. Still alil paranoid about pipes rubbing. Can't wait to drive it. And Yes alot cussing and blood was drawn.

Sent from my SM-N950U using Tapatalk

xxAGAVExx 01-20-2022 06:24 AM
I’m going to give it another go tomorrow, my goal is to get at least one turbo fully installed


Sent from my iPhone using Tapatalk

xxAGAVExx 01-21-2022 02:32 PM
Damn this kit is such a tight fit, took me half the day to get this pipe in the right spot. We’ll see what else I get done over the weekend.
https://uploads.tapatalk-cdn.com/202...535594403f.jpg
https://uploads.tapatalk-cdn.com/202...06b1b5a7fb.jpg
https://uploads.tapatalk-cdn.com/202...46039058c5.jpg


Sent from my iPhone using Tapatalk


All times are GMT -5. The time now is 05:58 PM.
Page 9 of 11 « First 78 9 1011
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2