Top half is done

Once the bumper is fitted and the bottom is seal and ducts are cut, draining out the coolant for distilled water and figure out another day to test

You need some coolant to lubricate the water pump. Or water wetter. Don't just use distilled water.

70/30 ratio

Stopped by Shawn Bassett shop and bring a quote for aero and cooling package

Went out for a sunday cruise in mexico city

Ok...your car is pissed off at something...she sounds angry.

Lol it’s very angry. Especially once it gets filled with race fuel. It’s like giving a meth head some of Walter white’s pure.

Finally got around to re doing the front end. This tape and cardboard is pretty sturdy.

Mmmm just a nice addition

https://imgur.com/a/9xiIHyG

I don’t know to post this video. But this pull was a quick 3-4 pull. I could see the iats’s
Climbing pretty rapidly 94 degree day on E 61. Cruising coolant coolant on oil temps while moving were lower then before by a few degrees. Coolant 196 usually 203, oil temps, 212, usually 225. Mins this was a 94 degree day. Had a really good 3,4,5 but messed the recording up.

This was a small pull from sitting at a stop light for a couple mins in 94 degree heat

Gearing up for race season

Welp, car failed yet again on the track. Back to the drawing board before the next outing in a few weeks.