RJM Whipple Customer Thread
 

This is a thread dedicated to RJM Whipple customers. I will populate what I can from offline customers. Please follow the following format for your intro:

Customer #X
Ordered Stage X.X with the following upgrades....
Pics of install
Dyno Sheet
-------------

For those not on the forum I will add what I can.

Brad's 7at Vert Build:

His entire Build is being video'd and posted to youtube here: Youtube playlist

Brad has a stage 1 with an upgraded Race heat exchanger. He also has an exhaust and headers I believe. Brad will be running the 4" pulley which is about 11psi. he is still waiting on some supporting mods before he hits the dyno. We expect he will be in the mid 500's.

UPDATE (2/11): Eugene Turkov is tuning brad’s car on ecutek.

https://scontent-atl3-1.xx.fbcdn.net...36&oe=5C821839
https://scontent-atl3-1.xx.fbcdn.net...ca&oe=5C7A5211
https://scontent-atl3-1.xx.fbcdn.net...07&oe=5C700641
https://scontent-atl3-1.xx.fbcdn.net...fd&oe=5C794A08
https://scontent-atl3-1.xx.fbcdn.net...ad&oe=5C3DE039
https://scontent-atl3-1.xx.fbcdn.net...de&oe=5C73961A

Christian's Red Z build:

Bobby finished this install about a month ago and christian has been tuned by Moncef over at ADMIN Tuning (great guy and good tuner.) Christian tracks this car but given the winter his driving has been limited.

Christian is on a stage 1 with an upgraded heat exchanger and a 4" pulley. I dont have a dyno but he has been whooping up on some 500 and 600whp vehicles.

https://scontent-atl3-1.xx.fbcdn.net...58&oe=5C3C7CCA
https://scontent-atl3-1.xx.fbcdn.net...22&oe=5C6C4760
https://scontent-atl3-1.xx.fbcdn.net...c1&oe=5C70E48F
https://scontent-atl3-1.xx.fbcdn.net...9c&oe=5C88216B
https://scontent-atl3-1.xx.fbcdn.net...f2&oe=5C7BDB59
https://scontent-atl3-1.xx.fbcdn.net...a3&oe=5C7E2A6D
https://scontent-atl3-1.xx.fbcdn.net...b3&oe=5C8A65BB

Next is Brian's G37 AWD Sedan. His motor was just assembled today so more progress to watch. This is going to be one badass sedan!!!

Brian is going full stage 2. This car will be running pump gas a c16+meth. RJM is personally building this car in house along with nomodsjk's carbon car. these two cars should be 900whp+.

https://scontent-atl3-1.xx.fbcdn.net...85&oe=5C7D0B91
https://scontent-atl3-1.xx.fbcdn.net...43&oe=5C884B16
https://scontent-atl3-1.xx.fbcdn.net...28&oe=5C7AA68D
ET Streets on all 4 corners:
https://scontent-atl3-1.xx.fbcdn.net...44&oe=5C4025E9

His Motor:
https://scontent-atl3-1.xx.fbcdn.net...b0&oe=5C75C7F9
https://scontent-atl3-1.xx.fbcdn.net...0f&oe=5C3D181E
https://scontent-atl3-1.xx.fbcdn.net...d7&oe=5C6F3C81
https://scontent-atl3-1.xx.fbcdn.net...38&oe=5C414FC5
https://scontent-atl3-1.xx.fbcdn.net...44&oe=5C83ACC2

His build can be found on facebook. This car will be shooting for 900+awhp and is fully caged!

Trey's Widebody black cherry Z:

Trey is running a stage 1.5 with a race heat exchanger. Trey made over 650+whp on a heart breaker dyno and over 580+ftlbs!!!! Trey is running the 3.4" pully and about 16-17psi. Trey had put over 5000 miles on his car in 2 months and brought the car to znationals/zcon 2018. Trey has now started his motor build over the winter and we hope to see him beating on this car again in the spring! There are videos and photos on facebook.

Here are some pictures of his ride!
https://scontent-atl3-1.xx.fbcdn.net...c8&oe=5C76D257
https://scontent-atl3-1.xx.fbcdn.net...b7&oe=5C88B0C4
https://scontent-atl3-1.xx.fbcdn.net...31&oe=5C3C1DBF
https://scontent-atl3-1.xx.fbcdn.net...f3&oe=5C6D7041
https://scontent-atl3-1.xx.fbcdn.net...9e&oe=5C78D281
https://scontent-atl3-1.xx.fbcdn.net...bd&oe=5C6E76F9
https://scontent-atl3-1.xx.fbcdn.net...fc&oe=5C6E20EE

Now we’re talkin’!

Sub'd. :tup:

I like the Whipple set up but havent been able to find any dyno sheets. Will you be posting some soon? Thanks

This is a stage 1 kit with race heat exchanger, stock block and 7at trans with the 3.9” pulley.

http://www.the370z.com/attachment.ph...1&d=1542237827

I thought the reason everyone liked Dynojet is they read consistently, so unless it’s an elevation thing there were no heartbreakers.

True. The DJ is the industry standard. Mustang dynos are the "Heartbreakers".

man when this kit becomes CA legal..... my wallet will go on a diet

RJM Whipple Customer Thread
 

Where’s the dyno showing a torque curve for one of these things?

That's the dyno sheet which it was from the black 370z at Z-day from last year. Not from the current cars.

Yeah still no dyno charts from any customers.