Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Introducing the RJM Positive Displacement Supercharger Kit! (http://www.the370z.com/forced-induction/127329-introducing-rjm-positive-displacement-supercharger-kit.html)

bullitt5897 01-22-2020 07:20 PM

Quote:

Originally Posted by turtle64b (Post 3902814)
I feel like this is going to spiral out of control and everyone is going to shut down here. I ask that we stick to facts here regarding what is transpiring with this build.

Ideally Bobby (or RJM) will respond here since his company's honor is being questioned. If that won't happen, then Mike (bullitt, I'm assuming), you are our conduit, really. You did put yourself in this light, you stated that you stand behind Bobby and RJM, so that is why you are being treated as if you work for them, even if it is only in a consultation manner.

Rich (I'm assuming Nomo), I would ask that you make the post that you have been waiting to make. This will allow response.

Again, I would ask that questions or criticisms not be directed at personal character attacks and try to get to the bottom of the facts.

Honestly, I have no problems with that at all.

2011 Nismo#91 01-22-2020 07:40 PM

Quote:

Originally Posted by BildoDabbins (Post 3902788)
If that's the case how is there only one picture of the kit on this thread which is the carbon Z I don't want to get into something I'm not invested in but this poor guy has gone 3 years without his car. How has nobody posted some sort of picture of anything. And quit the Facebook is where we post everything because everyone on Facebook is saying RJM is full of crooks. You are a grown man with a phone take some damn pictures or request this Bobby guy send some damn pictures. You're acting like we are pulling teeth just trying to get simple things answered like nobody even knows what the car looks like but he's been getting updates daily? Bud now come on

Sent from my moto g(7) power using Tapatalk

Yeah well RJM is only a parts manufacturer, they don't have a lift or the ability to tune and work on cars.

Rusty 01-22-2020 07:43 PM

Quote:

Originally Posted by turtle64b (Post 3902814)
I feel like this is going to spiral out of control and everyone is going to shut down here. I ask that we stick to facts here regarding what is transpiring with this build.

Ideally Bobby (or RJM) will respond here since his company's honor is being questioned. If that won't happen, then Mike (bullitt, I'm assuming), you are our conduit, really. You did put yourself in this light, you stated that you stand behind Bobby and RJM, so that is why you are being treated as if you work for them, even if it is only in a consultation manner.

Rich (I'm assuming Nomo), I would ask that you make the post that you have been waiting to make. This will allow response.

Again, I would ask that questions or criticisms not be directed at personal character attacks and try to get to the bottom of the facts.

It's already a chit show.

What could have kept is from happening was some updates every now and then instead of going dark. When things go dark. People get suspicious, like now. No one knew of the problems that was happening. If that was brought to light. Most would have understood.

Was just looking at Surfdog's builds. He has build from scratch a Daytona Coupe, got his 370Z back together and is restoring a 240Z in the same amount of time that RJM has had Rich's Z.

JARblue 01-22-2020 07:59 PM

Quote:

Originally Posted by bullitt5897 (Post 3902759)
I will continue to support him and his company as he is a very stand up and straight forward honest person. I hope this is clear enough for you.

Bobby is a liar. It's clear that you are, too.

If you lie down with dogs, you get up with fleas.
I hope this gets sorted. Sad to hear about the hood development. Could have been pretty sweet.

2011 Nismo#91 01-22-2020 08:11 PM

Quote:

Originally Posted by bullitt5897 (Post 3902799)
Hint for 6 months Bobby tried to get 1 tuner to push the car but he wouldn’t. So a change was made last fall and a lot of progress has been made tuning wise.

Wait, Bobby wasn't flying around the country helping tuners causing delays in productions? Whit this supposed simple to tune kit. You posted so many lies behalf of Bobby to keep his scam going you can't keep them all straight.

Spooler 01-22-2020 08:12 PM

Quote:

Originally Posted by JARblue (Post 3902838)
Bobby is a liar. It's clear that you are, too.

If you lie down with dogs, you get up with fleas.
I hope this gets sorted. Sad to hear about the hood development. Could have been pretty sweet.

Very True.

bullitt5897 01-22-2020 08:55 PM

Until this is resolved in private (between Rich and Bobby) and the car is delivered I will be locking this thread (not what I want to do, but a necessity). Once the car is done I will unlock and update.

It seems people don't want to be civil in here and want to continue to liable me. I have been very polite and have been 100% truthful... If you don't want to believe that then that's your problem to deal with.

I will not be distracted from my daily life and feel like I have to keep repeating myself with the same statements over and over. My statements aren't going to change. Call me a liar all you want but the data and evidence vindicates me 100 times over. no matter what the peanut gallery thinks they know. Nothing shady has taken place. Lack of information in the public doesn't mean something nefarious is a foot.

There is nothing to hide. There is no grand conspiracy. No one is being ripped off and everything that was paid for was provided and more. Lots of free work and parts went into this car to ease the pain of the long build time. I know because I gifted several items. I will not be on the forums until this is resolved. I don't have the time nor the patience to deal with the peanut gallery right now.

With that said LOCKED UNTIL DELIVERY!

bullitt5897 02-22-2020 05:51 PM

1 Attachment(s)
Opened the thread up to post initial numbers:

Pump gas 93oct @13psi:

http://www.the370z.com/attachment.ph...1&d=1582415333

This isnt pushing this motor and we have more to go... Please keep in mind this is a 9:1 compression motor. In a higher compression motor this car would be making a good bit more boost with this same pulley (3.2" upper).

What is impressive is that Tq curve! that is what we have always talked about! This kit shines in its power under the curve capabilities!


All times are GMT -5. The time now is 02:21 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2