![]() |
To be fair, this idler pulley popping off means it wasn't torqued properly to begin with. Which means this is 100% IPP's fault. Nobody touched that pulley ever since the
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
|
#1 (permalink) |
|
Track Member
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4837 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
To be fair, this idler pulley popping off means it wasn't torqued properly to begin with. Which means this is 100% IPP's fault.
Nobody touched that pulley ever since the engine was given to me, because there was no reason to touch it. Am I going to call IPP and tell them it's their fault? Probably not. Unless the pulley came out and cracked my block causing a hole somewhere which makes oil leaks that will cost a fortune to fix, only then will I fight IPP for that. I'm still under warranty technically since it's only february and I didn't purchase the block and get it to me until like April / May ish of last year. Lol. So many issues I'm laughing about it now at this point. I'm thinking to bring it to one person who is extremely mechanically inclined, and having them look over the entire car and look for any critical issues that may be, and have it fixed then and there. Tired of playing the exponentially growing whack-a-mole game with these issues haha
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler || |
|
|
|
|
|
#2 (permalink) | |
|
A True Z Fanatic
Join Date: Apr 2017
Location: So. Commiefornia
Posts: 6,386
Drives: 2014 Nismo Gunmetal
Rep Power: 2684376 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 750whp/700ft.lbs |
|
|
|
|
|
|
#3 (permalink) |
|
Track Member
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4837 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
On it already. I let him know that next week I will bring the car to him either if it's drive-able by tomorrow I will drive it there sometime next week, or I will get it towed there using 1/4 of my AAA tows of the year.
He said it was alright to bring it to him. He was actually supposed to look at it anyways but the car broke before I could even get it to him and it was raining over there too so that's another reason why he told me not to bring it to him. EDIT: I'm having AAA tow it to his house tomorrow morning. Since they are least busy at that time and least traffic too since Saturday morning!
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler || Last edited by cupcakez; 02-15-2019 at 09:28 PM. |
|
|
|
|
|
#4 (permalink) | |
|
A True Z Fanatic
Join Date: Sep 2012
Location: West Michigan
Posts: 31,410
Drives: Granma red Z
Rep Power: 2684430 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
|
|
|
|
|
|
|
#5 (permalink) | |
|
Track Member
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4837 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
I really hope it changes for the better too. Tbh, 2019 has been better overall than 2018 has. Last year in the first 2 months of 2018 my engine threw a rod causing 3 giant holes in it. This year first two months I only lost the compresser idler pulley lol. And yes I love cards xD I appreciate you all and for following this rough journey of mine, and for always supporting the entire time. It really does mean a lot and I wanted to share that with you all ![]() My hope is that leaving the car with Eugene for a few days, the car will be street driveable without something popping off, leaking, overheating, breaking, etc. Haha. Will defs keep you all updated!!!
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler || |
|
|
|
|
|
|
#6 (permalink) | |
|
A True Z Fanatic
Join Date: Apr 2017
Location: So. Commiefornia
Posts: 6,386
Drives: 2014 Nismo Gunmetal
Rep Power: 2684376 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 750whp/700ft.lbs |
|
|
|
|
|
|
#7 (permalink) | |
|
Track Member
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4837 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
I just want it better off than what it is now. Ofc i cant get a gaurantee but hey i honestly feel safest with the vehicle in his hands than anyone elses' right now xD Your absolutely right though!!!
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler || |
|
|
|
|
|
|
#8 (permalink) |
|
Track Member
Join Date: Oct 2014
Location: Orlando, Florida
Posts: 694
Drives: 15' Nismo Black 6MT
Rep Power: 10082 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
I dunno what to tell you about your build but my IPP stage two is on the left in the picture just like it came off the pallet. Everything else was transferred from my block on the right.
|
|
|
|
|
|
#9 (permalink) | |
|
Track Member
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4837 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
Now I know who to blame for that pulley then, thanks! Good thing you reminded me cuz i actually never saw the block when it came in from IPP. I assumed it came with pulleys and everything but nope. It was actually my mechanic who worked on the Red Z last year. Damnit. Okay.
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler || |
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| GTM Stage 1.5 supercharger build | snowsurfdirtx | Forced Induction | 197 | 05-07-2017 06:04 AM |
| RiD3_FaM0uS's Journey to 850+whp Build Thread | Rid3_FaM0uS | Member's 370Z Gallery | 83 | 03-24-2017 05:06 PM |
| Fillerbunnie's GTM Stage 1 Supercharger build (Australian RHD) | fillerbunnie | Forced Induction | 46 | 08-23-2015 01:07 AM |
| 40th Stillen Supercharger Build | Nism0 | Forced Induction | 51 | 03-23-2015 08:12 PM |
| THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD | Reaper42 | Forced Induction | 14 | 01-22-2011 05:24 PM |