STAGE 2 GTM supercharger BOV OPTIONS

axio

Thanks guys. Any reason you can't just use something like a silicone coupler and clamps to connect the Tial onto the TS flange? Easier than cutting and welding? Screw this onto the intake side of the QRJ and hose clamp it to the existing TS flange? https://www.jegs.com/i/TiAL-Sport/768/004492/10002/-1

Kinda like this picture? https://uploads.tapatalk-cdn.com/201...06b8e7a642.jpg

Also, since we're venting to atmosphere, I supposed I'd need something like this on the outlet side? https://www.jegs.com/i/TiAL-Sport/768/004806/10002/-1

__________________
GTM Stg II SC w/ Aquamist methanol injection, GTM oil cooler, Berk HFC, Stillen CBE, BC ER coilovers, Hotchkis sways, TWM short shifter, Clutch spring mod, CarboTech XP8s

Jinxx

I’m sure you could rig something ...but I wouldn’t recommend ...the idea is for the air to get out fast as possible ...that could cause lagggy response and chatter ..