Nissan 370Z Forum  

Preparation for the STILLEN supercharger

Originally Posted by MMC Racing I don't think this has been asked - what PSI is that dyno at?

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Forced Induction


Like Tree1Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 03-10-2010, 02:23 PM   #1021 (permalink)
A True Z Fanatic
 
Togo's Avatar
 
Join Date: May 2009
Location: E. Northport, NY
Posts: 7,597
Drives: Stuff
Rep Power: 657
Togo has a reputation beyond reputeTogo has a reputation beyond reputeTogo has a reputation beyond reputeTogo has a reputation beyond reputeTogo has a reputation beyond reputeTogo has a reputation beyond reputeTogo has a reputation beyond reputeTogo has a reputation beyond reputeTogo has a reputation beyond reputeTogo has a reputation beyond reputeTogo has a reputation beyond repute
Default

Quote:
Originally Posted by MMC Racing View Post
I don't think this has been asked - what PSI is that dyno at?
__________________
This will decimate all after you put about fifteen grand in it or more, and if we have to, overnight parts from Japan.

Joe Clem and Koeppel Nissan
Togo is offline   Reply With Quote
Old 03-10-2010, 02:27 PM   #1022 (permalink)
Enthusiast Member
 
stormcrow's Avatar
 
Join Date: Jan 2010
Location: Alpharetta, GA
Posts: 267
Drives: 2010 370Z Nismo TT
Rep Power: 15
stormcrow will become famous soon enough
Default

Quote:
Originally Posted by MMC Racing View Post
I don't think this has been asked - what PSI is that dyno at?
Yes, we all overlooked that question.

Kyle - As far as 93 octane goes, why not just mix your 91 octane with 100 octane unleaded? There is a calculable ratio for which you can get 93 from this mixture. I believe 3 gallons of 100 octane added to 10 gallons of 91 will net a 93.1 octane fuel. There, I just saved you from having to import fuel from Oklahoma. *lol*
stormcrow is offline   Reply With Quote
Old 03-10-2010, 02:30 PM   #1023 (permalink)
RCZ
A True Z Fanatic
 
RCZ's Avatar
 
Join Date: Nov 2008
Location: Miami
Posts: 6,403
Drives: '09 370Z
Rep Power: 1118
RCZ has a reputation beyond reputeRCZ has a reputation beyond reputeRCZ has a reputation beyond reputeRCZ has a reputation beyond reputeRCZ has a reputation beyond reputeRCZ has a reputation beyond reputeRCZ has a reputation beyond reputeRCZ has a reputation beyond reputeRCZ has a reputation beyond reputeRCZ has a reputation beyond reputeRCZ has a reputation beyond repute
Send a message via AIM to RCZ
Default

Quote:
Originally Posted by Kyle@STILLEN View Post
I don't have an exact answer for that yet but it has definitely been a topic around here.

Our biggest issue is that there is nowhere for us to get 93 octane fuel. We were talking yesterday about possible locations and the closest place we can think of is Oklahoma...We're currently looking into it though.
Cool, are there any plans for a Stillen branded meth/water injection kit? Maybe you guys could talk to Aquamist, SMC, Coolingmist or Snow Performance for some support. I think it might be nice insurance and a little extra power for those who are planning on pushing the limits a tad.
RCZ is offline   Reply With Quote
Old 03-10-2010, 02:38 PM   #1024 (permalink)
A True Z Fanatic
 
LiquidZ's Avatar
 
Join Date: Nov 2008
Location: Columbus, OH
Posts: 1,940
Drives: Mag. Black 2009 370Z
Rep Power: 704
LiquidZ has a reputation beyond reputeLiquidZ has a reputation beyond reputeLiquidZ has a reputation beyond reputeLiquidZ has a reputation beyond reputeLiquidZ has a reputation beyond reputeLiquidZ has a reputation beyond reputeLiquidZ has a reputation beyond reputeLiquidZ has a reputation beyond reputeLiquidZ has a reputation beyond reputeLiquidZ has a reputation beyond reputeLiquidZ has a reputation beyond repute
Default

Quote:
Originally Posted by RCZ View Post
Cool, are there any plans for a Stillen branded meth/water injection kit? Maybe you guys could talk to Aquamist, SMC, Coolingmist or Snow Performance for some support. I think it might be nice insurance and a little extra power for those who are planning on pushing the limits a tad.
Ah... the horsepower addiction is strong in this one...
__________________
LiquidZ is offline   Reply With Quote
Old 03-10-2010, 02:55 PM   #1025 (permalink)
Base Member
 
LUVZTTZ's Avatar
 
Join Date: Apr 2009
Location: St Louis, MO
Posts: 57
Drives: Black 91 TT
Rep Power: 16
LUVZTTZ is on a distinguished road
Default

Alrighty...early March is winding down. On what day will you be dropping the Press Release? Seems like a fair question
LUVZTTZ is offline   Reply With Quote
Old 03-10-2010, 03:03 PM   #1026 (permalink)
The370Z.com Sponsor
 
Kyle@STILLEN's Avatar
 
Join Date: Dec 2008
Location: Newport Beach
Posts: 626
Drives: Toyota Tundra
Rep Power: 306
Kyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond repute
Default

Quote:
Originally Posted by stormcrow View Post
Yes, we all overlooked that question.

Kyle - As far as 93 octane goes, why not just mix your 91 octane with 100 octane unleaded? There is a calculable ratio for which you can get 93 from this mixture. I believe 3 gallons of 100 octane added to 10 gallons of 91 will net a 93.1 octane fuel. There, I just saved you from having to import fuel from Oklahoma. *lol*
Yea, we have found a few sources on mixing 100 and 91 to get a final outcome of 93 but I don't know how much I trust it and I don't really want to risk our customer's engine's on it.

Quote:
Originally Posted by RCZ View Post
Cool, are there any plans for a Stillen branded meth/water injection kit? Maybe you guys could talk to Aquamist, SMC, Coolingmist or Snow Performance for some support. I think it might be nice insurance and a little extra power for those who are planning on pushing the limits a tad.
We do have plans for additional upgrades but it's a bit early to talk about them yet. We are a few months away from testing on those systems.

Quote:
Originally Posted by LUVZTTZ View Post
Alrighty...early March is winding down. On what day will you be dropping the Press Release? Seems like a fair question
Josh and I are putting together the press release this week. Our graphic artist is putting together a short video, and the engineer's are on the dyno with the Z. As long as everything goes well with the testing we should be releasing all of the info soon.
Kyle@STILLEN is offline   Reply With Quote
Old 03-10-2010, 03:13 PM   #1027 (permalink)
The370Z.com Sponsor
 
Kyle@STILLEN's Avatar
 
Join Date: Dec 2008
Location: Newport Beach
Posts: 626
Drives: Toyota Tundra
Rep Power: 306
Kyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond repute
Default

Quote:
Originally Posted by Kyle@STILLEN View Post
Figuring out the proper efficiency "range" of a Vortech supercharger takes a few things:

1) Volume of air you're trying to move
2) RPM that you're spinning the supercharger
3) Size of the engine you're trying to feed.

Basically, there might be a "sweet spot" of efficiency on the compressor map for the 370Z but it's going to be very different for an engine like a Charger SRT-8 however you can still use the same blower for each application.

One of the great things about the Vortech V3 supercharger is that it is a very efficient blower at over 70% efficiency.
updated...
Kyle@STILLEN is offline   Reply With Quote
Old 03-10-2010, 03:30 PM   #1028 (permalink)
Enthusiast Member
 
stormcrow's Avatar
 
Join Date: Jan 2010
Location: Alpharetta, GA
Posts: 267
Drives: 2010 370Z Nismo TT
Rep Power: 15
stormcrow will become famous soon enough
Default

Quote:
Originally Posted by Kyle@STILLEN View Post
Yea, we have found a few sources on mixing 100 and 91 to get a final outcome of 93 but I don't know how much I trust it and I don't really want to risk our customer's engine's on it.

Mixing higher and lower octane fuels to achieve a middle ground is a long-standing practice and hasn't resulted in any catastrophies that I know of. But, even if there were an inherent risk, you wouldn't be risking customer's cars on it, no? You would be mixing on your own car to produce a 93 octane base map tune for your flash that comes with the kit. Or am I missing something here?
stormcrow is offline   Reply With Quote
Old 03-10-2010, 03:34 PM   #1029 (permalink)
The370Z.com Sponsor
 
Kyle@STILLEN's Avatar
 
Join Date: Dec 2008
Location: Newport Beach
Posts: 626
Drives: Toyota Tundra
Rep Power: 306
Kyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond repute
Default

Quote:
Originally Posted by stormcrow View Post
Mixing higher and lower octane fuels to achieve a middle ground is a long-standing practice and hasn't resulted in any catastrophies that I know of. But, even if there were an inherent risk, you wouldn't be risking customer's cars on it, no? You would be mixing on your own car to produce a 93 octane base map tune for your flash that comes with the kit. Or am I missing something here?
You are correct, and we have done that in the past on some vehicle's. For example, I mix 100 octane with 91 octane on my dirtbike all the time.

But, if we are preparing a tune on our car using a 91 mix with 100 octane and say we don't get it 100% right and we end up with say 95 octane fuel...Then we're sending out a tune to our customer's who are in states with 93 octane hoping that the fuel we had in our car was truly 93...when in fact it was 95 and therefore the tune is going to be too aggressive.

is that a better explanation?

Basically...it doesn't matter what fuel is in our car...we can tune for it...but to trust that the fuel that we're using is truly 93 octane and then to send that tune to a customer...THAT's what puts the customer's car in danger.

Another wrench in the works is that California has oxygenated fuel which also sucks...We have really crappy fuel out here.

Last edited by Kyle@STILLEN; 03-10-2010 at 03:36 PM.
Kyle@STILLEN is offline   Reply With Quote
Old 03-10-2010, 03:39 PM   #1030 (permalink)
Enthusiast Member
 
stormcrow's Avatar
 
Join Date: Jan 2010
Location: Alpharetta, GA
Posts: 267
Drives: 2010 370Z Nismo TT
Rep Power: 15
stormcrow will become famous soon enough
Default

Quote:
Originally Posted by Kyle@STILLEN View Post
You are correct, and we have done that in the past on some vehicle's. For example, I mix 100 octane with 91 octane on my dirtbike all the time.

But, if we are preparing a tune on our car using a 91 mix with 100 octane and say we don't get it 100% right and we end up with say 95 octane fuel...Then we're sending out a tune to our customer's who are in states with 93 octane hoping that the fuel we had in our car was truly 93...when in fact it was 95 and therefore the tune is going to be too aggressive.

is that a better explanation?
Yes, and I actually grasped that. But, unless you *really* dropped the ball in your mixing of fuels, that scenario is next to impossible. Looking at it that way, you could have all sorts of scenarios play out for the negative. What if the fuel you received from OK was watered down? What if it had degraded? What about summer fuel vs. winter fuel? (drastic differences in 93 here) All of these things are really sort of moot. If you really wanted to tune for 93, the mixing is easiest route. And I was just throwing it out there to help.

Edit - saw your addition. It's cool. Whatever you guys feel is best for your company. Truly was just trying to help you out. If it is really not an option for you guys, no worries. If you want to know more about it, here is a good fuel company created chart on mixing for different octanes.


Last edited by stormcrow; 03-10-2010 at 03:45 PM.
stormcrow is offline   Reply With Quote
Old 03-10-2010, 03:48 PM   #1031 (permalink)
The370Z.com Sponsor
 
Kyle@STILLEN's Avatar
 
Join Date: Dec 2008
Location: Newport Beach
Posts: 626
Drives: Toyota Tundra
Rep Power: 306
Kyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond repute
Default

Quote:
Originally Posted by stormcrow View Post
Yes, and I actually grasped that. But, unless you *really* dropped the ball in your mixing of fuels, that scenario is next to impossible. Looking at it that way, you could have all sorts of scenarios play out for the negative. What if the fuel you received from OK was watered down? What if it had degraded? What about summer fuel vs. winter fuel? (drastic differences in 93 here) All of these things are really sort of moot. If you really wanted to tune for 93, the mixing is easiest route. And I was just throwing it out there to help.
I understand completely and I hope you didn't take my reply as argumentative or anything like that. Sometimes I just like to clarify that I explained myself well but by asking if it made sense can sometimes appear rude...I hate the internet for the simple reason that it can not convey any tone in your writing other than "wow, this guy's just being a jerk!" Unless you throw an LOL at the end of everything you write in which case you look like a sixteen year old girl texting her girlfriends.

To be perfectly honest...We don't like to take chances when it comes to some of the really important things like fuel, brakes, tires, roll cages, seat frames...Any time that something can fail in a catastrophic way, we like to take a lot of pre-cautions. For example, you should have seen all of the testing that went into the development of the CCM brakes for the GT-R. We tested out at El Toro air base for a couple of months with those things. We didn't want to put the CCM brakes in the hands of a customer only to find out that something might go wrong. The good thing...we found out that they are a PITA to bed properly. It literally took us two days at ridiculous speeds and temperatures to get them to properly bed in. So now, AP Racing puts them on a brake lathe before we send them out to a customer. We don't ask the customer's to bed them in because we don't think it's safe, or even possible to do it properly.

Last edited by Kyle@STILLEN; 03-10-2010 at 03:51 PM.
Kyle@STILLEN is offline   Reply With Quote
Old 03-10-2010, 03:51 PM   #1032 (permalink)
The370Z.com Sponsor
 
Kyle@STILLEN's Avatar
 
Join Date: Dec 2008
Location: Newport Beach
Posts: 626
Drives: Toyota Tundra
Rep Power: 306
Kyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond reputeKyle@STILLEN has a reputation beyond repute
Default

Quote:
Originally Posted by stormcrow View Post
Edit - saw your addition. It's cool. Whatever you guys feel is best for your company. Truly was just trying to help you out. If it is really not an option for you guys, no worries. If you want to know more about it, here is a good fuel company created chart on mixing for different octanes.

This could be very helpful, I will pass it to my engineering department!

Thank you very much!
Kyle@STILLEN is offline   Reply With Quote
Old 03-10-2010, 03:54 PM   #1033 (permalink)
Enthusiast Member
 
stormcrow's Avatar
 
Join Date: Jan 2010
Location: Alpharetta, GA
Posts: 267
Drives: 2010 370Z Nismo TT
Rep Power: 15
stormcrow will become famous soon enough
Default

Quote:
Originally Posted by Kyle@STILLEN View Post
I understand completely and I hope you didn't take my reply as argumentative or anything like that. Sometimes I just like to clarify that I explained myself well but by asking if it made sense can sometimes be derogatory...I hate the internet for the simple reason that it can not convey any tone in your writing other than "wow, this guy's just being a jerk!" Unless you throw an LOL at the end of everything you write in which case you look like a sixteen year old girl texting her girlfriends.

To be perfectly honest...We don't like to take chances when it comes to some of the really important things like fuel, brakes, tires, roll cages, seat frames...Any time that something can fail in a catastrophic way, we like to take a lot of pre-cautions. For example, you should have seen all of the testing that went into the development of the CCM brakes for the GT-R. We tested out at El Toro air base for a couple of months with those things. We didn't want to put the CCM brakes in the hands of a customer only to find out that something might go wrong. The good thing...we found out that they are a PITA to bed properly. It literally took us two days at ridiculous speeds and temperatures to get them to properly bed in. So now, AP Racing puts them on a brake lathe before we send them out to a customer. We don't ask the customer's to bed them in because we don't think it's safe, or even possible to do it properly.
I hear you on the first paragraph. Tone, enunciation and such are truly lost and a lot of times we all are "read" out of context. No worries. I didn't think you were being a jerk. I just thought you might look at my 'advice' a bit askew due to my past posts.

And I can certainly appreciate your desire to put out the best product available. I, as a consumer, expect that from all vendors. And if I thought, for a second, that there would be any issue with you mixing fuels to make a canned tune I would certainly never recommend such. Still, you should consider it an option. Certainly don't take my word for it being a viable option, but do contact fuel companies and get their take on it. You will be very surprised at what they say you can do.
stormcrow is offline   Reply With Quote
Old 03-10-2010, 03:56 PM   #1034 (permalink)
Enthusiast Member
 
stormcrow's Avatar
 
Join Date: Jan 2010
Location: Alpharetta, GA
Posts: 267
Drives: 2010 370Z Nismo TT
Rep Power: 15
stormcrow will become famous soon enough
Default

Quote:
Originally Posted by Kyle@STILLEN View Post
This could be very helpful, I will pass it to my engineering department!

Thank you very much!
You are welcome! And we're typing at the same time and making a mess of the quotes! :LOL'ing like a 16yo:
stormcrow is offline   Reply With Quote
Old 03-10-2010, 05:24 PM   #1035 (permalink)
Base Member
 
Join Date: Jan 2009
Location: west
Posts: 231
Drives: 370z
Rep Power: 672
370z4Steve has a reputation beyond repute370z4Steve has a reputation beyond repute370z4Steve has a reputation beyond repute370z4Steve has a reputation beyond repute370z4Steve has a reputation beyond repute370z4Steve has a reputation beyond repute370z4Steve has a reputation beyond repute370z4Steve has a reputation beyond repute370z4Steve has a reputation beyond repute370z4Steve has a reputation beyond repute370z4Steve has a reputation beyond repute
Default

looks like a basic 3:1 ratio 91 to 100
370z4Steve is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stillen Supercharger estimates??? NewYorkJon34 Forced Induction 454 01-22-2010 11:05 PM
Southern "Winter" preparation? Matt South East Region 1 11-27-2009 05:23 PM
Titan supercharger madmocasin Forced Induction 41 11-09-2009 01:23 AM
Will Stillen Supercharger & G3 intakes Connect? NewYorkJon34 Forced Induction 23 10-31-2009 12:09 AM


All times are GMT -5. The time now is 02:25 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2