GTM Stage 1.5 Supercharger instruction manual

kentmo280z · 11-12-2016, 10:45 AM

Well,
I bit the bullet and purchased the Gamma Stage 1 to 1.5 upgrade kit.
Included is the inlet housing & piping, inlet filter, 3" maf piping, Motor mount , 92mm pulley.
I'll have my pulley for sale. It reads 84 so I assume it's an 84mm pulley.
I'll measure that to double check.
Belt and sc traction oil.
Will update when it all happens.

AntiVenom · 11-12-2016, 05:17 PM

Quote:

Originally Posted by kentmo280z

Well,
I bit the bullet and purchased the Gamma Stage 1 to 1.5 upgrade kit.
Included is the inlet housing & piping, inlet filter, 3" maf piping, Motor mount , 92mm pulley.
I'll have my pulley for sale. It reads 84 so I assume it's an 84mm pulley.
I'll measure that to double check.
Belt and sc traction oil.
Will update when it all happens.

Nice! Good luck. Should be straight forward.

kentmo280z · 11-12-2016, 05:20 PM

Hopefully I can swap the SC housing out without a major tear down involved...
Waiting for Gamma to send me the installation instructions.

Zat_Zuma · 11-13-2016, 10:51 AM

Quote:

Originally Posted by kentmo280z

Hopefully I can swap the SC housing out without a major tear down involved...
Waiting for Gamma to send me the installation instructions.

It's doable but the motor has to be lifted for removing the stage 1 intake.
Otherwise remove the Rotrex S/C and swap out the intakes. Third option in removing the Stage 1 air intake involves cutting it in half to provide clearance to remove it from the S/C.

A lift will make things easier to work on.

Keep the 84 mm pulley, as you may want to use it later for more boost.

kentmo280z · 11-13-2016, 11:11 AM

I know I have to pull the exhaust manifold and motor mount, maybe that will give me some room to pull the housing ???..
I'm always up for an adventure...

Zat_Zuma · 11-13-2016, 11:28 AM

Quote:

Originally Posted by kentmo280z

I know I have to pull the exhaust manifold and motor mount, maybe that will give me some room to pull the housing ???..
I'm always up for an adventure...

Nope, the front motor cradle frame is in the way. Been there and done that.

11-12-2016, 10:45 AM	#1 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 11	Well, I bit the bullet and purchased the Gamma Stage 1 to 1.5 upgrade kit. Included is the inlet housing & piping, inlet filter, 3" maf piping, Motor mount , 92mm pulley. I'll have my pulley for sale. It reads 84 so I assume it's an 84mm pulley. I'll measure that to double check. Belt and sc traction oil. Will update when it all happens. AntiVenom likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM supercharger stage 1	turbooo	Forced Induction	1	09-01-2015 08:18 AM
Need instruction manual for Stillen supercharger	Osiris	Forced Induction	8	07-21-2015 02:43 PM
[FOR SALE] Gtm supercharger stage 1	bryantlopez63	Parts for sale (Private Classifieds)	32	11-22-2013 10:11 AM
GTM Supercharger Stage 1 w/ F.I. LTH	theDreamer	Forced Induction	140	03-16-2013 04:50 PM
[FOR SALE] Used Gtm stage 1 supercharger kit	Jamaica	Parts for sale (Private Classifieds)	58	06-20-2012 09:12 PM

11-12-2016, 05:20 PM	#3 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 11	Hopefully I can swap the SC housing out without a major tear down involved... Waiting for Gamma to send me the installation instructions.

11-13-2016, 11:11 AM	#5 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 11	I know I have to pull the exhaust manifold and motor mount, maybe that will give me some room to pull the housing ???.. I'm always up for an adventure...