AAM VQ37 Twin Turbo Kit!

Rob@Altered · 08-05-2009, 09:44 AM

Quote:

Originally Posted by LiquidZ

According to AAM, they make a few parts in house (i.e. manifolds) during the install.

LiquidZ got that right on the dot.
Every turbo kit is built on the car. As said above, we build our own turbo manifold and right now we do not have the manpower to mass produce turbo manifolds in house.
Also, because this is a custom kit, a lot of customers want something special/different for their car/s (i.e. different IC piping, bigger intercooler etc.)

Also, if it's a big custom turbo build, we can help or even compensate you for the shipping cost of your car to our shop

Give us a call, email us, we have a very knowledgeable general manager and service writers and we are willing to answer any questions you have of our turbo kits

FuszNissan · 08-05-2009, 10:00 AM

Tempting

Rob@Altered · 08-05-2009, 10:08 AM

Quote:

Originally Posted by FuszNissan

Tempting

DOOOOOOOOOOOO IT~~~~~!!!

lol

Give us a call

XwChriswX · 08-05-2009, 10:29 AM

What colors do you do for the IC piping? I saw a turbonetics kit that had black intercooler piping that looked BA...

Rob@Altered · 08-05-2009, 11:02 AM

Quote:

Originally Posted by XwChriswX

What colors do you do for the IC piping? I saw a turbonetics kit that had black intercooler piping that looked BA...

Our IC pipes are SS.
We did fabricate a black IC piping on a 350Z before.
Check out our site, and check out our "customer vehicle", click on "Kurt's Nissan 350Z".
Here is the link:
Kurt's Nissan 350Z Twin Turbo | Altered Atmosphere Motorsports
Check this out also,
Bryces' 350z | Altered Atmosphere Motorsports, Inc.
It looks very, very stealthy

Also, we have couple of VQ35/37HR Twin Turbo we did on our site. Check them out also:
Bryan's G37 | Altered Atmosphere Motorsports
Jarvis' 350z | Altered Atmosphere Motorsports, Inc.
Nick's G37 | Altered Atmosphere Motorsports

Enjoy

CCCLXXZ · 08-05-2009, 11:10 AM

You can powdercoat your IC piping any color you want.... neon pink to candy green to matt white. If it is aluminum IC piping, you get a choice to send it for anodizing... which can get you into fade patterns (black to red), splash patterns, and camo varieties.

I would say the sky is the limit.

Nick

FuszNissan · 08-05-2009, 11:13 AM

Let's Chat!

Rob@Altered · 08-05-2009, 12:05 PM

Quote:

Originally Posted by CCCLXXZ

You can powdercoat your IC piping any color you want.... neon pink to candy green to matt white. If it is aluminum IC piping, you get a choice to send it for anodizing... which can get you into fade patterns (black to red), splash patterns, and camo varieties.

I would say the sky is the limit.

Nick

Correct!!!
You can even do Leopard pattern if you want. That is my favorite....

Rob@Altered · 08-05-2009, 12:05 PM

Quote:

Originally Posted by FuszNissan

Let's Chat!

Got your Email

Brazilbro · 08-05-2009, 01:18 PM

what kind of engine managment do you use?

ErnieT · 08-05-2009, 06:36 PM

Quote:

Originally Posted by AAM_COMP

LiquidZ got that right on the dot.
Every turbo kit is built on the car. As said above, we build our own turbo manifold and right now we do not have the manpower to mass produce turbo manifolds in house.
Also, because this is a custom kit, a lot of customers want something special/different for their car/s (i.e. different IC piping, bigger intercooler etc.)

Also, if it's a big custom turbo build, we can help or even compensate you for the shipping cost of your car to our shop

Give us a call, email us, we have a very knowledgeable general manager and service writers and we are willing to answer any questions you have of our turbo kits

I guess this excuse would work on somebody without a general knowledge of turbo cars, but not me

If your going to make a turbo "kit", then its just that, a kit. If you have to make them one at a time as they are purchased, so be it. Nothing is going to change. Intercooler piping will not change, bigger intercooler will not affect you either. You will sell many more kits if you sell them as such and not some cheesy excuses. Tell Mike I said so

George@GTM · 08-05-2009, 07:43 PM

Quote:

Originally Posted by AAM_COMP

Danny,
Give us a call!! We would love to talk to you about TTing your car.

nogood,
Yes we were the 1st ones to TT a G37. We have some pictures up on our website, come check them out.

Also, stay tuned guys/gals, you might see couple of 370ZTT running around Mid-Atlatic area

Actually you weren't we had our Twin Turbo G37 done back in Sema '07, and it drove into SEMA it wasn't pushed. ( a lot of SEMA show cars are) I believe you guys built a twin turbo G37 about a year later? might have been a little sooner.

We purchased the G37 when it first came out (was very hard to get the car) and got to work on it right away. We have done the same with the 370Z and the kit is basically done, just need to finishing some testing.

Just want to correct the bit of mis-information, you might be new at AAM

-George
GT Motorsports

George@GTM · 08-05-2009, 07:43 PM

Oh yea here is the link:

GT Motorsports: G37S VVEL Twin Turbo, 4.5L Stroker, MoTeC, SEMA '07 Project Car - MY350Z.COM Forums

-George
GT Motorsports

rackley · 08-05-2009, 08:04 PM

Quote:

Originally Posted by ErnieT

I guess this excuse would work on somebody without a general knowledge of turbo cars, but not me

If your going to make a turbo "kit", then its just that, a kit. If you have to make them one at a time as they are purchased, so be it. Nothing is going to change. Intercooler piping will not change, bigger intercooler will not affect you either. You will sell many more kits if you sell them as such and not some cheesy excuses. Tell Mike I said so

Yeah.. To me a kit is "mass produced" (relatively speaking) and shipped to customers around the country. I.e. you design a prototype, then have the custom parts mass produced to sell as kits.

Example: Flyin' Miata : Redesigning the turbos

And if you want to know how to do install instructions RIGHT, read this: http://www.flyinmiata.com/support/in...all_turbos.pdf

Rob@Altered · 08-06-2009, 04:18 AM

Thanks George for the correction.

Quote:

Originally Posted by George@GTM

Actually you weren't we had our Twin Turbo G37 done back in Sema '07, and it drove into SEMA it wasn't pushed. ( a lot of SEMA show cars are) I believe you guys built a twin turbo G37 about a year later? might have been a little sooner.

We purchased the G37 when it first came out (was very hard to get the car) and got to work on it right away. We have done the same with the 370Z and the kit is basically done, just need to finishing some testing.

Just want to correct the bit of mis-information, you might be new at AAM

-George
GT Motorsports

08-05-2009, 10:00 AM	#47 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 541	Tempting __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

08-05-2009, 10:29 AM	#49 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	What colors do you do for the IC piping? I saw a turbonetics kit that had black intercooler piping that looked BA... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

08-05-2009, 11:13 AM	#52 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 541	Let's Chat! __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Altered Atomosphere: Twin Turbo G37	thefireboy	Forced Induction	7	08-01-2012 05:02 PM
Forged Performance: GTM Twin Turbo VQ37VHR G37	AK370Z	Forced Induction	92	06-29-2009 07:50 PM
Product Announcement GTM Twin Turbo Kit for VQ37VHR	Slidefox	Forced Induction	24	06-11-2009 05:58 PM
BMW M3 E46 Turbo vs Lamborghini Gallardo	AK370Z	Other Vehicles	7	12-27-2008 01:22 PM

08-05-2009, 11:10 AM	#51 (permalink)
CCCLXXZ Base Member Join Date: May 2009 Location: Chicago Suburbs Posts: 164 Drives: T/S/MB/6 370z Rep Power: 400	You can powdercoat your IC piping any color you want.... neon pink to candy green to matt white. If it is aluminum IC piping, you get a choice to send it for anodizing... which can get you into fade patterns (black to red), splash patterns, and camo varieties. I would say the sky is the limit. Nick

08-05-2009, 01:18 PM	#55 (permalink)
Brazilbro A True Z Fanatic Join Date: Mar 2009 Location: Indianapolis, IN Posts: 1,131 Drives: Juke/240Z Rep Power: 848	what kind of engine managment do you use?

08-05-2009, 07:43 PM	#58 (permalink)
George@GTM NOT AN ACTIVE VENDOR. DO NOT BUY Join Date: Dec 2008 Location: California Posts: 146 Drives: TTG41 Rep Power: 16	Oh yea here is the link: GT Motorsports: G37S VVEL Twin Turbo, 4.5L Stroker, MoTeC, SEMA '07 Project Car - MY350Z.COM Forums -George GT Motorsports