Turbosmart Dual Port BPV With Stillen Kit

zmanelite

I have one on my set up and Stillen actually had to retune the car with it till it worked properly with the Stillen SC

__________________
Instagram @zmanscm

StillenZ84

That's interesting. Never heard of having to get retuned.

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34

x2o

This is interesting, from most people I've heard its just a matter of fine-tuning the adjustment on the BPV. Guess I will find out today

I know that the Stillen demo car currently has one of these installed, and I imagine for their demo purposes they use their full CARB legal kit/tune. So with that assumption I just guessed if they could use it on the canned tune then why should I need a retune?

That was my logic anyways haha we will see where it gets me

__________________
2011 370z Supercharged Sport Touring 7AT
Stillen: Supercharger Kit | Cat Back/TP | Oil/AT Coolers
GTM: Hardened 7AT (valve body+torque converter)
Whiteline: 27mm Front | 24mm Rear | Swift Springs