Stillen air to air conversion fabrication thread

[JWillis72]

Originally Posted by EVOHUNTER

I have a impeller, I have a full cog set up.

I have a custom 2.43" pulley for the 7 Rib serp side.

this ill be doing next year with a return fuel system and 850cc injectors.

This year I have the stillen 2.75" pulley on the serp side.

And the I put on the 2.75" pulley on the blower. has anyone does this setup yet?

This should be around 10 psi I think?

Someone chime in for me.

Can I ask why you are waiting until next year for that set up? Is it just not being able to feed it enough fuel? I'm asking because I have a return fuel system that could handle it and more but I want to make sure I'm not missing something.I'm looking forward to seeing what you get out of the car when its tuned.

[EVOHUNTER]

Originally Posted by JWillis72

Can I ask why you are waiting until next year for that set up? Is it just not being able to feed it enough fuel? I'm asking because I have a return fuel system that could handle it and more but I want to make sure I'm not missing something.I'm looking forward to seeing what you get out of the car when its tuned.

Yep, its all fuel.

I need bigger injectors, and a return system.

I'm going to install over winter and retune next year.

I just want to get everyone a baseline off the air/air system then move up from there!