Stillen Air to Air setup

JWillis72

I found an old post Sam from you know where about SD tuning our cars that doesn't sound good. Does anyone know a 370Z that is actually SD tuned? I was at the DR office so when I found it so I took a pic.




Sent from my iPhone using Tapatalk

StillenZ84

I am straight up Speed density tuned. If you can somehow get ahold of him, John Visconti is the one who did my tuning. Back when we were all talking about this last month on this thread, I told him that a lot of people were trying to use a 3bar map sensor and he insisted it could only be done with a 4bar (no idea why). So that is what I am running. My MAFs play 0 role in how my car is tuned per John. Haven't heard form him in a couple weeks with more questions I have had but he would know what and how SD works on our cars.

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34