Stillen Air to Air setup

jwick · 11-28-2015, 01:22 PM

Quote:

Originally Posted by TopgunZ

Who can recommend some cold weather tires that hook?

That's an oxymoron

Z&I · 11-28-2015, 01:32 PM

Quote:

Originally Posted by TopgunZ

Z is in the parent's garage. I took her out the other day but it was just spin city. It was only 34 degrees out.

Who can recommend some cold weather tires that hook?

I put on the Blizzaks for the winter when it was my DD ...
I was able to drive through most of the winter on them.
They are a little noisy and squirmy under load - not a racing tire for sure.

Cold Wet Roads and the Z didn't mix well even on all seasons.

TopgunZ · 11-28-2015, 01:57 PM

Here is my gauge holder. I built it to also hold my phone using the nite ize so I can display torque.

TopgunZ · 11-28-2015, 03:58 PM

Who might be interested in my supercharger or air to air setup? I need a winter project.

StillenZ84 · 11-29-2015, 01:46 PM

If you still have it in a month Ill definitely take it off your hands. Was planning on starting the air to air journey after christmas. Would save whoever buys it time and frustration no doubt.

JWillis72 · 11-29-2015, 01:53 PM

Quote:

Originally Posted by TopgunZ

Who might be interested in my supercharger or air to air setup? I need a winter project.

What kind of project are you thinking about doing?

TopgunZ · 11-29-2015, 09:47 PM

Something that puts my built motor to use. I can put the larger pulley on this and hit around 525whp but I'd like to go for the 600 club.

YzGyz · 11-29-2015, 10:49 PM

One off biggy size supercharger? ? 600hp SC! !

YzGyz

BOLIO 671 · 11-30-2015, 06:47 AM

Quote:

Originally Posted by TopgunZ

Something that puts my built motor to use. I can put the larger pulley on this and hit around 525whp but I'd like to go for the 600 club.

U going TT????

TopgunZ · 11-30-2015, 11:23 AM

Not twins. Unless I find a deal I can't refuse.

Z&I · 11-30-2015, 12:04 PM

Quote:

Originally Posted by TopgunZ

Who might be interested in my supercharger or air to air setup? I need a winter project.

Hey TOP ...
Still have that brand new Vortech V2Ti - only been on the car for a test fit.
Should slide right in to your new set up and get you close to that 600 mark.

It would qualify as a winter project for you since there is a little fitting involved.

V-1 Ti Supercharger | Vortech Superchargers

This link is for the V1 specs since the V2 [for some reason] doesn't list the specs for the Ti Trim.
The V2 is slightly different in that it does have the quieter curved gears than the V1, and has slightly better overall specs.

It will fit the Stillen Bracket you made but since it is slightly physically bigger you will probably need to line it up a little.
It is Oil Cooled so you need to do a little work there as well.
I did have the Oil lines made up when it was fitted to the car.

Paid $2600 for it - any reasonable offer will be graciously entertained :-)

JWillis72 · 11-30-2015, 12:53 PM

Top, we are thinking of using the Stillen y pipe like you did, you had enough MAF using it correct?

Sent from my iPhone using Tapatalk

ANMVQ · 11-30-2015, 02:33 PM

BTW if any of you needs that Stillen intake Y pipe I had a extra one just sitting in my basement, Have the stock BPV also :/

TopgunZ · 11-30-2015, 06:17 PM

Bob, thanks man. Funny thing is I was researching that last night! I'll let you know.

Jwilly, my mafs were at 4.2v. You have plenty of room.

Something I just learned that I thought was awesome is vsr tunes their kit to the oem map sensor and don't use maf but do utilize the iats. Said they are good to 15psi!

JWillis72 · 11-30-2015, 06:33 PM

Quote:

Originally Posted by TopgunZ

Bob, thanks man. Funny thing is I was researching that last night! I'll let you know.

Jwilly, my mafs were at 4.2v. You have plenty of room.

Something I just learned that I thought was awesome is vsr tunes their kit to the oem map sensor and don't use maf but do utilize the iats. Said they are good to 15psi!

That is interesting because we tried that. The ECU was still seeing the voltage off and would go pig rich but maybe if the voltage was right that would have worked. We ordered parts today that should be here Wednesday or Thursday so we car try again.

11-28-2015, 03:58 PM	#754 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Who might be interested in my supercharger or air to air setup? I need a winter project. JWillis72 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

11-29-2015, 01:46 PM	#755 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 17	If you still have it in a month Ill definitely take it off your hands. Was planning on starting the air to air journey after christmas. Would save whoever buys it time and frustration no doubt. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

11-29-2015, 09:47 PM	#757 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Something that puts my built motor to use. I can put the larger pulley on this and hit around 525whp but I'd like to go for the 600 club. chuckie311 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

11-29-2015, 10:49 PM	#758 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 62	One off biggy size supercharger? ? 600hp SC! ! YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

11-30-2015, 11:23 AM	#760 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Not twins. Unless I find a deal I can't refuse. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

11-30-2015, 12:53 PM	#762 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	Top, we are thinking of using the Stillen y pipe like you did, you had enough MAF using it correct? Sent from my iPhone using Tapatalk

11-30-2015, 02:33 PM	#763 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	BTW if any of you needs that Stillen intake Y pipe I had a extra one just sitting in my basement, Have the stock BPV also :/ __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

11-30-2015, 06:17 PM	#764 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Bob, thanks man. Funny thing is I was researching that last night! I'll let you know. Jwilly, my mafs were at 4.2v. You have plenty of room. Something I just learned that I thought was awesome is vsr tunes their kit to the oem map sensor and don't use maf but do utilize the iats. Said they are good to 15psi! JWillis72 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM