Stillen Air to Air setup

JWillis72 · 11-23-2015, 11:13 AM

well the shop that did mu pipes blew it on the y pipe. The intake to it is in at an angle so its clearly not splitting evenly. Thinking about it now I think it's doing what it was when the kits was first installed. The shop that installed it left off the part that blocks the lower filter so when I would coast at 3-40mph one MAF was getting more air that the other and the car would go into some protective mode and go pig rich. Our thought right now is that while we are not trying to tune it with the MAFs the car is still going into that mode because of what it's seeing from the MAFs. First we are going to try to trick the car, we are going to attach both MAF signal wires to one MAF so they get the same reading and then see if we can get anything to change SD tuning it. If that doesn't work we will have to have a new y pipe made.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM

11-23-2015, 11:13 AM	#11 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 46	well the shop that did mu pipes blew it on the y pipe. The intake to it is in at an angle so its clearly not splitting evenly. Thinking about it now I think it's doing what it was when the kits was first installed. The shop that installed it left off the part that blocks the lower filter so when I would coast at 3-40mph one MAF was getting more air that the other and the car would go into some protective mode and go pig rich. Our thought right now is that while we are not trying to tune it with the MAFs the car is still going into that mode because of what it's seeing from the MAFs. First we are going to try to trick the car, we are going to attach both MAF signal wires to one MAF so they get the same reading and then see if we can get anything to change SD tuning it. If that doesn't work we will have to have a new y pipe made.