Stillen Air to Air setup

Masterbeatty · 08-17-2015, 10:07 AM

Quote:

Originally Posted by TopgunZ

No. He sent it ground and said it is supposed to be here Friday. He said air would have been like $125 more. I have the tracking number but it says it is not found in UPS's system. Kinda nervous. If I don't get it Friday then my dyno will be pushed out by 3 weeks or more since they are super busy. That would really, really suck.

You should take a day off on Friday and cancel all plans to wait on your door step. I missed my delivery guy by 45 mins and had to wait 3 more days just to drive and pick something up. I also missed an autox event which I was pissed. Hopefully it all works out for you on sat.

TopgunZ · 08-17-2015, 11:04 AM

Quote:

Originally Posted by Masterbeatty

You should take a day off on Friday and cancel all plans to wait on your door step. I missed my delivery guy by 45 mins and had to wait 3 more days just to drive and pick something up. I also missed an autox event which I was pissed. Hopefully it all works out for you on sat.

That's the killer part. I took Friday off! However, I had the package sent to my work where there will be someone to receive it no matter what.

I took the day off to button up any loose ends required before the dyno day. If the package doesn't arrive then I will have to make my own intakes post intercooler which is not what I want to do.

On another note. I have everything ready to go with the car minus my ethanol content analyzer system and the manifold isn't bolted down yet.

I cant get to the bolts. I believe Evohunter said to use a EZ-red with flex head so I bought one, FOR $46 BUCKS, and there is no way it will work. Since it is not open ended it contacts the mani before it slips over the bolt head. Ive returned it.

So instead I have a different wrench on order. It is a ratcheting, open end style that uses a spring loaded jaw. If that doesn't work I will need to make my own tool out of some steel flat bar.

JWillis72 · 08-17-2015, 11:35 AM

Quote:

Originally Posted by TopgunZ

That's the killer part. I took Friday off! However, I had the package sent to my work where there will be someone to receive it no matter what.

I took the day off to button up any loose ends required before the dyno day. If the package doesn't arrive then I will have to make my own intakes post intercooler which is not what I want to do.

On another note. I have everything ready to go with the car minus my ethanol content analyzer system and the manifold isn't bolted down yet.

I cant get to the bolts. I believe Evohunter said to use a EZ-red with flex head so I bought one, FOR $46 BUCKS, and there is no way it will work. Since it is not open ended it contacts the mani before it slips over the bolt head. Ive returned it.

So instead I have a different wrench on order. It is a ratcheting, open end style that uses a spring loaded jaw. If that doesn't work I will need to make my own tool out of some steel flat bar.

I don't know where the wrench from Stillen went so I bought a cheap wrench that we torched and bent.

EVOHUNTER · 08-20-2015, 12:51 PM

Quote:

Originally Posted by TopgunZ

That's the killer part. I took Friday off! However, I had the package sent to my work where there will be someone to receive it no matter what.

I took the day off to button up any loose ends required before the dyno day. If the package doesn't arrive then I will have to make my own intakes post intercooler which is not what I want to do.

On another note. I have everything ready to go with the car minus my ethanol content analyzer system and the manifold isn't bolted down yet.

I cant get to the bolts. I believe Evohunter said to use a EZ-red with flex head so I bought one, FOR $46 BUCKS, and there is no way it will work. Since it is not open ended it contacts the mani before it slips over the bolt head. Ive returned it.

So instead I have a different wrench on order. It is a ratcheting, open end style that uses a spring loaded jaw. If that doesn't work I will need to make my own tool out of some steel flat bar.

Did you receive your charge pipe??

TopgunZ · 08-20-2015, 02:51 PM

Quote:

Originally Posted by EVOHUNTER

Did you receive your charge pipe??

It will be here Monday. I tune Wednesday.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM