Stillen Air to Air setup

JWillis72 · 08-15-2015, 03:58 PM

How did you get ahold of him? I've messaged him several times.

Sent from my iPhone using Tapatalk

EVOHUNTER · 08-15-2015, 04:27 PM

Any one have a video on there belt tension on the blower side.

I need someone to grab the belt and twist it on video so i can go from there.

I think I've got the tension right..

JWillis72 · 08-15-2015, 04:58 PM

My car is locked in the shop but if no one can shoot it before Monday I can go get you video then.

Sent from my iPhone using Tapatalk

StillenZ84 · 08-16-2015, 02:51 PM

Quote:

Originally Posted by EVOHUNTER

Any one have a video on there belt tension on the blower side.

I need someone to grab the belt and twist it on video so i can go from there.

I think I've got the tension right..

If video isn't showing up its here. https://youtu.be/36tAJPWifh8

TopgunZ · 08-16-2015, 06:52 PM

Z84. How close to the top of the idler pulley bracket are you? Stock pulleys on there?

StillenZ84 · 08-16-2015, 07:34 PM

I have about another 1/2 inch I can go on the bracket. Stock jack and SC pulleys but I put a 2 3/4 inch idler pulley on there that my tuner had laying around after the smaller stock pulley blew out. I was pretty much maxed out on the bracket with the smaller stock pulley.

EVOHUNTER · 08-16-2015, 08:26 PM

Quote:

Originally Posted by StillenZ84

I have about another 1/2 inch I can go on the bracket. Stock jack and SC pulleys but I put a 2 3/4 inch idler pulley on there that my tuner had laying around after the smaller stock pulley blew out. I was pretty much maxed out on the bracket with the smaller stock pulley.

I tried to use a pulley that size with the 2.75" on the blower. but it bent the tensioner bracket. That thing is flimsy. Im on the dyno next weekend so hopefully everything goes good. Ill be able to give you guys an idea of boost from this 2.75" on the charger.

I also found that when you twist your supercharger belt, you can see your blower moving. the bracket flexes so easy.

EVOHUNTER · 08-16-2015, 08:27 PM

Quote:

Originally Posted by StillenZ84

If video isn't showing up its here. https://youtu.be/36tAJPWifh8

Thanks dude!

TopgunZ · 08-16-2015, 08:34 PM

I made a new bracket on our cnc machine. Made it out of 7075 al. That grade is twice as strong as 6061 and tge stillen one could be made of even a lower grade. Didn't cut the bolt slot out. So this thing should be 4x stronger.

I also have a 3" idler.

My only setback from dynoing Saturday will be if my intake has a shipping delay. It will be very close.

EVOHUNTER · 08-17-2015, 08:24 AM

Quote:

Originally Posted by TopgunZ

I made a new bracket on our cnc machine. Made it out of 7075 al. That grade is twice as strong as 6061 and tge stillen one could be made of even a lower grade. Didn't cut the bolt slot out. So this thing should be 4x stronger.

I also have a 3" idler.

My only setback from dynoing Saturday will be if my intake has a shipping delay. It will be very close.

did you get him to air mail it?

Should be 3 days max with air.

StillenZ84 · 08-17-2015, 09:28 AM

So does anyone actually have these conversion parts for sale yet or is everything being fabricated by your local shops?

TopgunZ · 08-17-2015, 09:29 AM

No. He sent it ground and said it is supposed to be here Friday. He said air would have been like $125 more. I have the tracking number but it says it is not found in UPS's system. Kinda nervous. If I don't get it Friday then my dyno will be pushed out by 3 weeks or more since they are super busy. That would really, really suck.

TopgunZ · 08-17-2015, 09:37 AM

Quote:

Originally Posted by StillenZ84

So does anyone actually have these conversion parts for sale yet or is everything being fabricated by your local shops?

I think Sasha will be in the market soon. But, I cant speak for him. He did make a post stating his upgrade kit will be $1750 for the a2a setup.

However, if your talking about the upgrades to handle more power other than the a2a conversion, then we are all just "one offing" them ourselves.

So far for more power you will need:
Air to Air setup (with MAF relocation)
Upgraded pulley bracket
Upgraded idler pulley on SC side
Main bracket Anti-flex bar/bracket
Series of pulleys and/or Impeller upgrade
Larger injectors and pump - RFS recommended

Masterbeatty · 08-17-2015, 10:07 AM

Quote:

Originally Posted by TopgunZ

No. He sent it ground and said it is supposed to be here Friday. He said air would have been like $125 more. I have the tracking number but it says it is not found in UPS's system. Kinda nervous. If I don't get it Friday then my dyno will be pushed out by 3 weeks or more since they are super busy. That would really, really suck.

You should take a day off on Friday and cancel all plans to wait on your door step. I missed my delivery guy by 45 mins and had to wait 3 more days just to drive and pick something up. I also missed an autox event which I was pissed. Hopefully it all works out for you on sat.

StillenZ84 · 08-17-2015, 10:12 AM

Quote:

Originally Posted by TopgunZ

I think Sasha will be in the market soon. But, I cant speak for him. He did make a post stating his upgrade kit will be $1750 for the a2a setup.

However, if your talking about the upgrades to handle more power other than the a2a conversion, then we are all just "one offing" them ourselves.

So far for more power you will need:
Air to Air setup (with MAF relocation)
Upgraded pulley bracket
Upgraded idler pulley on SC side
Main bracket Anti-flex bar/bracket
Series of pulleys and/or Impeller upgrade
Larger injectors and pump - RFS recommended

Awesome well I am all in when it is available for purchase!

08-15-2015, 04:27 PM	#257 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	Any one have a video on there belt tension on the blower side. I need someone to grab the belt and twist it on video so i can go from there. I think I've got the tension right.. __________________

08-16-2015, 06:52 PM	#260 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Z84. How close to the top of the idler pulley bracket are you? Stock pulleys on there? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

08-16-2015, 07:34 PM	#261 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 17	I have about another 1/2 inch I can go on the bracket. Stock jack and SC pulleys but I put a 2 3/4 inch idler pulley on there that my tuner had laying around after the smaller stock pulley blew out. I was pretty much maxed out on the bracket with the smaller stock pulley. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

08-16-2015, 08:34 PM	#264 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	I made a new bracket on our cnc machine. Made it out of 7075 al. That grade is twice as strong as 6061 and tge stillen one could be made of even a lower grade. Didn't cut the bolt slot out. So this thing should be 4x stronger. I also have a 3" idler. My only setback from dynoing Saturday will be if my intake has a shipping delay. It will be very close. Z&I and StillenZ84 like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

08-17-2015, 09:28 AM	#266 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 17	So does anyone actually have these conversion parts for sale yet or is everything being fabricated by your local shops? __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

08-15-2015, 03:58 PM	#256 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	How did you get ahold of him? I've messaged him several times. Sent from my iPhone using Tapatalk

08-15-2015, 04:58 PM	#258 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	My car is locked in the shop but if no one can shoot it before Monday I can go get you video then. Sent from my iPhone using Tapatalk

08-17-2015, 09:29 AM	#267 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	No. He sent it ground and said it is supposed to be here Friday. He said air would have been like $125 more. I have the tracking number but it says it is not found in UPS's system. Kinda nervous. If I don't get it Friday then my dyno will be pushed out by 3 weeks or more since they are super busy. That would really, really suck. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM