Stillen Air to Air setup

TopgunZ · 08-07-2015, 10:00 AM

Well last night I decided to pull out the angle grinder and get at that frame lip. Took out a 3" section of it. The volute slips right in place now and the design into the IC will work great. This requires much more effort than cutting plastic off the fan guard. In fact, I still had to cut one of the guards off just so my angle grinder could get a flat plane to cut the lip off at.

However, I am now able to use just a 45* off the SC at an angle down to a 90* then its a straight shot into the front mount. Very minimal bends in this design. Only a total of 135* hot side and only about 30 inches of pipe.

Ill post pics this weekend.

JWillis72 · 08-07-2015, 01:29 PM

Quote:

Originally Posted by TopgunZ

Well last night I decided to pull out the angle grinder and get at that frame lip. Took out a 3" section of it. The volute slips right in place now and the design into the IC will work great. This requires much more effort than cutting plastic off the fan guard. In fact, I still had to cut one of the guards off just so my angle grinder could get a flat plane to cut the lip off at.

However, I am now able to use just a 45* off the SC at an angle down to a 90* then its a straight shot into the front mount. Very minimal bends in this design. Only a total of 135* hot side and only about 30 inches of pipe.

Ill post pics this weekend.

I have been looking at my car and I like your idea. Not only do you end up with less pipe and bends but you also get the top pipe out of the way opening up more air flow coming out of the radiator to my hood vents.

08-07-2015, 10:00 AM	#1 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Well last night I decided to pull out the angle grinder and get at that frame lip. Took out a 3" section of it. The volute slips right in place now and the design into the IC will work great. This requires much more effort than cutting plastic off the fan guard. In fact, I still had to cut one of the guards off just so my angle grinder could get a flat plane to cut the lip off at. However, I am now able to use just a 45* off the SC at an angle down to a 90* then its a straight shot into the front mount. Very minimal bends in this design. Only a total of 135* hot side and only about 30 inches of pipe. Ill post pics this weekend. ANMVQ, EVOHUNTER, JWillis72 and 1 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM