Stillen Air to Air setup

EVOHUNTER · 08-23-2015, 09:38 AM

Probably like a 5" tube, to mount the mafs in. But I'm not even sure.

jwick · 08-23-2015, 10:39 AM

Quote:

Originally Posted by EVOHUNTER

Probably like a 5" tube, to mount the mafs in. But I'm not even sure.

5" tube would be a ton more area than us turbo guys are getting with dual 3". Guess it all comes down to how much air you need to move.

JWillis72 · 08-23-2015, 11:13 AM

The shop that works on my car does lots of GTRs and are telling me they go to speed density with them a lot.

Sent from my iPhone using Tapatalk

EVOHUNTER · 08-23-2015, 11:26 AM

This is what sebz suggested ^

Speed density.

JWillis72 · 08-23-2015, 11:36 AM

We are going to talk to the tuner tomorrow about it. He tunes all their GTRs and the place usually looks like this.

Sent from my iPhone using Tapatalk

EVOHUNTER · 08-23-2015, 11:40 AM

Speed density is not hard to do, it would cost about 60$, buy a 3bar map sensor.
its actually really easy to do.

You have use the MAF signal wire on the mafs, splice that into your MAP sensor, then map sensor to 5v source, and map grounded on body.

EVOHUNTER · 08-23-2015, 11:41 AM

Quote:

Originally Posted by JWillis72

We are going to talk to the tuner tomorrow about it. He tunes all their GTRs and the place usually looks like this.

Sent from my iPhone using Tapatalk

Sweet man, let me know what he says

EVOHUNTER · 08-23-2015, 11:43 AM

We need to find a 5v source, or we could use a 5v regulator.

JWillis72 · 08-23-2015, 11:45 AM

I will for sure let you know what he says.

Sent from my iPhone using Tapatalk

JWillis72 · 08-23-2015, 12:03 PM

It's a bummer you ran out of MAF but the number give me a good feeling about this set up once we get over the hurtle. Your car is making 10whp less and 29tq more than my car at full speed and 8lb, that's a great start!

Sent from my iPhone using Tapatalk

ANMVQ · 08-23-2015, 08:18 PM

WoW man sux'd about the Mafs , something is missed readi this also, sorry

I swapped mine cause I knew I was going to run out at 450 ish WHP. I thought you had UPREVs so didn't mention it. But it looks like those wouldn't have mattered either :/. The the numbers are there you should be able to get to 500WHP if you can get it ironed out!! Great work man and looking for you to crack that 500!

TopgunZ · 08-23-2015, 09:05 PM

I fabbed up a Frankenstein intake today. Im not thrilled about the maf placement but we will see how she goes.

JWillis72 · 08-24-2015, 06:11 AM

Quote:

Originally Posted by TopgunZ

I fabbed up a Frankenstein intake today. Im not thrilled about the maf placement but we will see how she goes.

What size pipe are the MAFs in?

ANMVQ · 08-24-2015, 07:15 AM

Pics? The more I though about this I think this was the reason I said we'd need a dual intake pipe like the GTM kit, I think the BIG single split to 2 for the MAF's just has way to much air flow :/

TopgunZ · 08-24-2015, 08:24 AM

Mine has it split from a 3" to 2.75" pipes. Then the mafs are right there in each pipe after the split about 4" up. That's what I don't like. But yes, they are in their own pipe each.

And by fabbed I mean I used the stillen intake Y off the kit. This is the best I could do in trying to get this done by Wednesday. So if you look at that pipe you will see how close my mafs will be by the split and the 45* bends. I have a honecomb air straightener right before the "in" on that pipe. I hope this is enough to keep the fluctuations at bay from not having 4" to 6" of straight pipe before the mafs.

Thoughts on this?

08-23-2015, 09:38 AM	#316 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	Probably like a 5" tube, to mount the mafs in. But I'm not even sure. __________________

08-23-2015, 11:13 AM	#318 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	The shop that works on my car does lots of GTRs and are telling me they go to speed density with them a lot. Sent from my iPhone using Tapatalk StillenZ84 likes this.

08-23-2015, 11:26 AM	#319 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	This is what sebz suggested ^ Speed density. __________________

08-23-2015, 11:36 AM	#320 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	We are going to talk to the tuner tomorrow about it. He tunes all their GTRs and the place usually looks like this. Sent from my iPhone using Tapatalk G37Some, StillenZ84 and wideglideleon like this.

08-23-2015, 11:40 AM	#321 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	Speed density is not hard to do, it would cost about 60$, buy a 3bar map sensor. its actually really easy to do. You have use the MAF signal wire on the mafs, splice that into your MAP sensor, then map sensor to 5v source, and map grounded on body. jaytirbhaw likes this. __________________

08-23-2015, 11:43 AM	#323 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	We need to find a 5v source, or we could use a 5v regulator. __________________

08-23-2015, 11:45 AM	#324 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	I will for sure let you know what he says. Sent from my iPhone using Tapatalk

08-23-2015, 12:03 PM	#325 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	It's a bummer you ran out of MAF but the number give me a good feeling about this set up once we get over the hurtle. Your car is making 10whp less and 29tq more than my car at full speed and 8lb, that's a great start! Sent from my iPhone using Tapatalk StillenZ84 likes this.

08-23-2015, 08:18 PM	#326 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	WoW man sux'd about the Mafs , something is missed readi this also, sorry I swapped mine cause I knew I was going to run out at 450 ish WHP. I thought you had UPREVs so didn't mention it. But it looks like those wouldn't have mattered either :/. The the numbers are there you should be able to get to 500WHP if you can get it ironed out!! Great work man and looking for you to crack that 500! JWillis72 likes this. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda, Last edited by ANMVQ; 08-24-2015 at 07:14 AM.

08-23-2015, 09:05 PM	#327 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	I fabbed up a Frankenstein intake today. Im not thrilled about the maf placement but we will see how she goes. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

08-24-2015, 07:15 AM	#329 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Pics? The more I though about this I think this was the reason I said we'd need a dual intake pipe like the GTM kit, I think the BIG single split to 2 for the MAF's just has way to much air flow :/ __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-24-2015, 08:24 AM	#330 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Mine has it split from a 3" to 2.75" pipes. Then the mafs are right there in each pipe after the split about 4" up. That's what I don't like. But yes, they are in their own pipe each. And by fabbed I mean I used the stillen intake Y off the kit. This is the best I could do in trying to get this done by Wednesday. So if you look at that pipe you will see how close my mafs will be by the split and the 45* bends. I have a honecomb air straightener right before the "in" on that pipe. I hope this is enough to keep the fluctuations at bay from not having 4" to 6" of straight pipe before the mafs. Thoughts on this? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 08-24-2015 at 08:53 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM