Direct Port Nitrous

V8Killer · 02-23-2015, 07:42 PM

Looking to see if anybody knows where there is a complete kit for our car? I have been searching and talked to a few companies. I am currently running a Zex kit with the foggers in the intake. I spoke with Nitrous Outlet and they said I have to trash the whole kit if I want to go direct port. Any and all help would be appreciated.

V8Killer · 02-24-2015, 05:28 AM

Lots of views but no information. Chime in when you can!

brancky3 · 02-24-2015, 06:57 AM

Quote:

Originally Posted by V8Killer

Lots of views but no information. Chime in when you can!

Probably because not a lot of people run nitrous in this community but are probably curious about it

madwi · 02-24-2015, 07:15 AM

The title got me all excited, thought I was going to see some

pics.

gbrettin · 02-24-2015, 11:19 AM

This guy is running direct port on his 350z:
https://www.youtube.com/watch?v=-OPACv8dJ7g

Maybe you could leave a message on youtube?

SlowZ · 02-24-2015, 02:08 PM

Im doing a direct port on mine in a few months

V8Killer · 02-25-2015, 05:11 AM

Quote:

Originally Posted by SlowZ

Im doing a direct port on mine in a few months

Have you decided on who you are going through with this? Since I am heading that route I can kind of be a guinea pig for you.

SlowZ · 02-25-2015, 08:14 PM

I have a local shop that wants to do it for me. They are my buddies so labor would be next to nothing and all I have to pay for is whatever I really need like nozzles, jets, etc at a discounted price. It's the same shop that had me spraying a 190 shot est. As soon as my turbo kit is on I'm going to talk to them and we will finish it up

madwi · 02-25-2015, 08:45 PM

Quote:

Originally Posted by SlowZ

I have a local shop that wants to do it for me. They are my buddies so labor would be next to nothing and all I have to pay for is whatever I really need like nozzles, jets, etc at a discounted price. It's the same shop that had me spraying a 190 shot est. As soon as my turbo kit is on I'm going to talk to them and we will finish it up

How much hp are you planning to add from nitrous on top of your turbo?

Venom13132 · 06-19-2015, 06:55 AM

I think direct port would be much easier to setup if there were more aftermarket intake manifold options. I am working on a side project to design and make a new intake manifold that would allow for easy direct port setups.

I run a 3D scanner at work. I have the lower intake scanned in. Will be doing the upper next week and a scan of both together so I can get the dimensions into solidworks. Id like to design something that mounts in the stock location so the throttle bodys, intake pipes and strut brace still fit like stock.

Venom13132 · 07-07-2015, 12:36 PM

I got some more scanning done. Used a different lens set to make the files smaller. Hopefully I will be able to work with these files. They are close to 2gig each instead of 19gig!

I still have some fill in work to get the gaps that I wasnt able to catch with the scanner, but I can do that at home.

phunk · 07-07-2015, 04:32 PM

PM me a price quote to get a Parasolid CAD of your LIM scan. Thanks!

V8Killer · 01-18-2016, 08:48 PM

Bumping an old thread of mine to see if anybody out there has done this yet. I've talked to zex today and they gave me all the part numbers I need in order to do this.

gbrettin · 01-19-2016, 12:53 PM

Mind listing the parts?

V8Killer · 01-19-2016, 01:18 PM

Quote:

Originally Posted by gbrettin

Mind listing the parts?

Ya bud no problem. Since I already have the zex kit installed I wouldn't need the brain box, bottle, purge etc.

82155 nozzle assembly 8 of them
82152 2 distribution blocks< having trouble locating these I am going to have to call them again to check on the number.
Ns 6615a 6
Ns6616a 6

Also I am looking for anyone willing to let me borrow a lower intake just so we can look at how we would run the lines and where to tap. We wouldn't actually tap the manifold just using it for the mock up.

02-23-2015, 07:42 PM	#1 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 17	Direct Port Nitrous Looking to see if anybody knows where there is a complete kit for our car? I have been searching and talked to a few companies. I am currently running a Zex kit with the foggers in the intake. I spoke with Nitrous Outlet and they said I have to trash the whole kit if I want to go direct port. Any and all help would be appreciated. __________________ "Punch" Too much to list and a baby shot of nitrous....

02-24-2015, 05:28 AM	#2 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 17	Lots of views but no information. Chime in when you can! __________________ "Punch" Too much to list and a baby shot of nitrous....

02-24-2015, 07:15 AM	#4 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	The title got me all excited, thought I was going to see some pics. gbrettin likes this.

02-24-2015, 11:19 AM	#5 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,297 Drives: Tricycle Rep Power: 589151	This guy is running direct port on his 350z: https://www.youtube.com/watch?v=-OPACv8dJ7g Maybe you could leave a message on youtube? V8Killer likes this.

06-19-2015, 06:55 AM	#10 (permalink)
Venom13132 Base Member Join Date: Jul 2014 Location: indianapolis Posts: 232 Drives: 10Z Tour Sport Nav Rep Power: 11	I think direct port would be much easier to setup if there were more aftermarket intake manifold options. I am working on a side project to design and make a new intake manifold that would allow for easy direct port setups. I run a 3D scanner at work. I have the lower intake scanned in. Will be doing the upper next week and a scan of both together so I can get the dimensions into solidworks. Id like to design something that mounts in the stock location so the throttle bodys, intake pipes and strut brace still fit like stock. YzGyz and James10694 like this.

02-24-2015, 02:08 PM	#6 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 12	Im doing a direct port on mine in a few months

02-25-2015, 08:14 PM	#8 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 12	I have a local shop that wants to do it for me. They are my buddies so labor would be next to nothing and all I have to pay for is whatever I really need like nozzles, jets, etc at a discounted price. It's the same shop that had me spraying a 190 shot est. As soon as my turbo kit is on I'm going to talk to them and we will finish it up

07-07-2015, 12:36 PM	#11 (permalink)
Venom13132 Base Member Join Date: Jul 2014 Location: indianapolis Posts: 232 Drives: 10Z Tour Sport Nav Rep Power: 11	I got some more scanning done. Used a different lens set to make the files smaller. Hopefully I will be able to work with these files. They are close to 2gig each instead of 19gig! I still have some fill in work to get the gaps that I wasnt able to catch with the scanner, but I can do that at home. wsarver likes this.

07-07-2015, 04:32 PM	#12 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,669 Drives: 370 Rep Power: 974724	PM me a price quote to get a Parasolid CAD of your LIM scan. Thanks! DEpointfive0 likes this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

01-18-2016, 08:48 PM	#13 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 17	Bumping an old thread of mine to see if anybody out there has done this yet. I've talked to zex today and they gave me all the part numbers I need in order to do this. David Parra likes this. __________________ "Punch" Too much to list and a baby shot of nitrous....

01-19-2016, 12:53 PM	#14 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,297 Drives: Tricycle Rep Power: 589151	Mind listing the parts?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can't use OBD Port	blumango	Tuning	5	04-18-2013 01:15 AM
Hill's Garage GTM Stage 2 Supercharger Direct Port Methanol Dyno	Staples	Forced Induction	19	11-19-2012 08:53 PM
OBD-II Port	delusional	DIY Section (Do-It-Yourself)	3	04-16-2012 04:27 PM
USB Port	Calvin	Audio & Video	7	02-24-2012 08:11 PM
Where's the USB port?	Phimosis	Audio & Video	10	06-13-2009 02:49 PM