Nissan 370Z Forum - Replaced my factory Gauges!

Nissan 370Z Forum (http://www.the370z.com/)

- Exterior & Interior (http://www.the370z.com/exterior-interior/)

- - Replaced my factory Gauges! (http://www.the370z.com/exterior-interior/97480-replaced-my-factory-gauges.html)

Quote:

Originally Posted by LAVA (Post 3055146)

Do you have a link for the actual ones you ordered?
Thx

I am guessing, but I think it's this one

Full Size Rocker Switches - 1/4'' Tabs - ON-OFF SPST - WiringProducts

Quote:

Originally Posted by LAVA (Post 3055146)

Do you have a link for the actual ones you ordered?
Thx

CDOXP800,

you're correct!!! but you win nothing lol thank you for chiming in :tiphat:

ill post the link in the first post as well. simple on/off switch
Full Size Rocker Switches - 1/4'' Tabs - ON-OFF SPST - WiringProducts

Good skills - u are brave well done

Thx to you both for the link and good find Gregor12 I like these

Quote:

Originally Posted by Brayster (Post 3055284)

Good skills - u are brave well done

it doesn’t always end well but thanks though lol

Quote:

Originally Posted by LAVA (Post 3055453)

Thx to you both for the link and good find Gregor12 I like these

i can’t take all the credit haha another guy on here used them and posted up. but it never hurts to help spread the word. you will have to trim the outside corners of the two outer switches for them to sit flush.

Phil

Quote:

Originally Posted by Gregor12 (Post 3007381)

**Update**
YOU CANNOT DELETE THE FACTORY SENSORS. service engine soon light came on
The oil temp and oil pressure sending units are different threads

Quote:

Originally Posted by Mitco39 (Post 3007552)

Yeah you will throw a oil pressure light

You can delete the OEM idiot lite switch/oil pressure in '09s. Mine has never came on since removal. If your engine oil pressure warning lite came on, then Nissan musta changed the ECU ROM to recognize it in later models. I agree w/not removing the OEM oil temperature sensor, the ECU uses that to factor in controlling multiple tasks (you'll get a SES lite for sure). JDM tradition to make the oil pressure threads BSPT. The oil temp sensor threads are metric, but you shouldn't remove this anyway. I used an oil pan drain plug adapter for my Defi oil temp sensor.

Quote:

Originally Posted by L33T Z34 (Post 3117417)

I agree! I think the oil temp is a 10x1.25. So stupid. Can't remember because it's been so long though. I had the oil oressure disconnected and it threw a service engine soon light. But the oil temp was still connected. I ended up using a sandwich adapter which contains my factory oil pressure sending unit, and podi oil temp. Then put my podi oil pressure sender In the block where the factory one went lol.

Bump. Sold my Z. Who has it now??? Lol anyone know. Hopefully the new owner is on here!

Sent from my iPhone using Tapatalk