Help with Hood & Fender dimensions for CLEAR BRA

kenchan · 10-06-2009, 01:47 PM

that was one on a silver car and one on a dark blue. i did the install and was very careful about maximizing the adhesive strength so no, i did not have build up on the seams.

after waxing i took my soft MF towel (and with some QD) gently
ran it across the seam and remove the wax/polish. it was very
clean when i sold the cars.

Holliday · 10-06-2009, 01:59 PM

Did you use a heat gun or blow dryer with your install? Was it pretty easy to install? I have seen videos and it looks pretty simple. I think the hardest part would be keeping trash out from underneath the film. Any tips for me?

Holliday · 10-15-2009, 10:13 PM

Does anybody else have some measurements to compare?

10-06-2009, 01:59 PM	#2 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 39 Posts: 916 Drives: in the fast lane.... Rep Power: 17	cool Did you use a heat gun or blow dryer with your install? Was it pretty easy to install? I have seen videos and it looks pretty simple. I think the hardest part would be keeping trash out from underneath the film. Any tips for me? __________________

10-15-2009, 10:13 PM	#3 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 39 Posts: 916 Drives: in the fast lane.... Rep Power: 17	? Does anybody else have some measurements to compare? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan 370z Raised Hood Kit / Hood Spacer Kit	Mak	Exterior & Interior	39	12-20-2020 10:24 AM
front wheel fender clips	spearfish25	Exterior & Interior	12	04-01-2012 07:11 PM
Fender Coating to reduce noise	Minicobra1	Nissan 370Z General Discussions	44	02-13-2011 08:12 PM
Clear Bra: Hood, Bumber, or Both?	matt2112	Nissan 370Z General Discussions	14	06-27-2009 05:28 PM
VQ37VHR Engine Dimensions	roddyalan	Engine & Drivetrain	0	05-06-2009 03:04 AM

10-06-2009, 01:47 PM	#1 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	that was one on a silver car and one on a dark blue. i did the install and was very careful about maximizing the adhesive strength so no, i did not have build up on the seams. after waxing i took my soft MF towel (and with some QD) gently ran it across the seam and remove the wax/polish. it was very clean when i sold the cars.