It's coming along. I'm wondering if I should put mesh where the DRL' s usually go because I don't want to do DRL's... What does everyone think?

http://i207.photobucket.com/albums/b...0835_HDR_1.jpg

http://i207.photobucket.com/albums/b...160836_HDR.jpg

http://i207.photobucket.com/albums/b...160837_HDR.jpg

Say yes to the mesh.

DC - here's what I did. Once painted, it'll be siliconed on the back side. I used two layers of mesh. One sheet folded in half.

[IMG]https://farm2.staticflickr.com/1487/...7d8184ec_b.jpg25194228841_67c0af467e_o by Raf, on Flickr[/IMG]

Mesh looks good! What kind is that you used?

Yes, what mesh? I am thinking of using the DRL holes for brake ducts. Has anyone done that?

From here:

Diamond Grill Mesh Sheets - customcargrills.com

Perfect. Thanks

oh hi

https://scontent-atl3-1.xx.fbcdn.net...6d&oe=5755AADC

Greetings, I have all the parts for the front conversion but having some issues with the rear parts.

I talked to Nissan and they are not showing any difference for the rear splash shields between the nismo and non nismo editions. Also they are not sure what the center lower rear brace is? And I don't know either so I cant explain! Hoping someone can help me out on these two issues so I can get this project moving.

Also doing side skits...anyone know if there's any additional hardware for those?

Thank you!

Sent from my SM-N920V using Tapatalk

No additional parts required for the side skirts, the are a direct fit.

If by centre lower rear brace you mean the part titled retainer rear bumper, lower I think its for the rear fog light.

I'm doing the rear conversion shortly once i pick the bumper up from the paint shop. I'll let you know for certain what is and isn't needed.

Here's a list i put together on the UK forum.

Please check the correct part numbers before ordering anything.

Front:

http://i.imgur.com/3Kfyg8u.gif

62064-6GA0B PROTECTOR-FRONT BUMPER - Arch extender LH
62064-6GA0A PROTECTOR-FRONT BUMPER - Arch extender RH
62077-6GA0A MOULDING-FRONT BUMPER,LH - Side insert trim
62076-6GA0A MOULDING-FRONT BUMPER,RH - Side insert trim
62087-6GA0A MOULDING-FRONT BUMPER,LH - Red insert
62086-6GA0A MOULDING-FRONT BUMPER,RH - Red insert
62022-6GA2H FASCIA-FRONT BUMPER



Skirts:

http://i.imgur.com/OZvzHxQ.gif

76850-6GA0H PROTECTOR-BODY SIDE SILL,RH
76851-6GA0H PROTECTOR-BODY SIDE SILL,LH

Rear:

http://i.imgur.com/gVlgIaQ.gif

76748-6GA0A PROTECTOR-REAR WHEEL HOUSE,RH - Arch liner
76749-6GA0A PROTECTOR-REAR WHEEL HOUSE,LH - Arch liner
85022-6GA2H FASCIA-REAR BUMPER - £364.38 (Note: dealer thought part number was 85022-6GA2H)
85010-6GA0A COVER-REAR BUMPER - Tow cover
85249-1EA2A RETAINER-REAR BUMPER,LOWER - Rear bumper lower retainer (not sure if required).

Final badge arrived today.

Full house!

http://i.imgur.com/tFadhMv.jpg?2

Are the two parts you listed for the side skits the actual skirts? Any update on what's needed for sure on the rear??

Sent from my SM-N920V using Tapatalk

Hi

This is my first post although I've been lurking around and getting great tips from here for some time. I'm in the UK and I have the earlier version of the 370Z Nismo. I'm interested in converting to the later version's front bumper. I've checked this thread and I'm not sure if anyone over here has done the same thing? If so, it would be great to see a picture and hear about any issues that came up. Thanks :)

Once you pull the earlier Nismo kit of your car, the conversion is no different then what you have seen in this thread. You'll need a different under-tray as yours will not work. Unless you cut it up I guess.