Nissan 370Z Forum
Page 29 of 77 « First 192728 29 303139 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   2015 Nismo Bumper on 2009 Sport possible? (http://www.the370z.com/exterior-interior/95060-2015-nismo-bumper-2009-sport-possible.html)

Asheth 04-13-2015 05:26 PM
Here is a pic of the 2015 Nismo DRL's for reference

http://i.imgur.com/ZFtE0Br.jpg
http://i.imgur.com/kJykdAG.jpg

xero8p 04-13-2015 05:34 PM
OK for those of you who have done the rear bumper is there anything special I need to know. From what I read there are fender extenders also for the rear is that correct? Any other parts besides the bumper and accents needed? Anything I need to forewarn the body shop about so I am prepared.

My plans got accelerated on doing this thanks to someone behind me deciding a red light meant don't slow down or even stop.

Asheth 04-13-2015 05:48 PM
Quote:
Originally Posted by xero8p (Post 3167790)
OK for those of you who have done the rear bumper is there anything special I need to know. From what I read there are fender extenders also for the rear is that correct? Any other parts besides the bumper and accents needed? Anything I need to forewarn the body shop about so I am prepared.

My plans got accelerated on doing this thanks to someone behind me deciding a red light meant don't slow down or even stop.
There aren't many people that have done a conversion with the new kit. I'd say maybe 10? I know one person on the 370z facebook group who is doing the rear bumper he said he will get it this Friday so you might want to ask there.

cooltoy 04-13-2015 06:26 PM
Quote:
Originally Posted by 370z209 (Post 3167733)
The problem is with the actual size of the LED's behind the bumper. They run long vertically. I tried after taking them off my 14 bumper.
Custom brackets could be built, opening reshaped. It all depends on the cost.

carlitos_370z 04-14-2015 06:45 AM
Quote:
Originally Posted by cooltoy (Post 3167696)
Anything can be done with molding and cutting, you should know that Carlos after your lip mod. Question is the cost. Yes, they are different, but how much different? The 2014 DRLs seem flatter then the 2015 Nismo DRLs, so who knows how they would integrate.
:iagree: bro!!!

magnus05 04-14-2015 07:47 AM
What site is the best to buy the kit with DRL's

cooltoy 05-14-2015 05:34 PM
Found this pic.

https://pbs.twimg.com/media/B_oUfz8WAAABER0.jpg:large

carlitos_370z 05-15-2015 06:32 AM
in my personal opinion... dont liked :/ I think they have to change the other parts (side skirts and rear bumper) to make a cleaner look...

But like I said... its my opinion... If the owner likes how it looks great haha!! cause that at the end of the day is what really matters :tup:

RicerX 05-15-2015 10:30 AM
The new side skirts are part of what makes the 2015 look so different. It creates an entirely different visual side profile of the car. It's amazing how little that front bumper does on the Nismo pictured above with the absence of the side skirts.

FairladyZ10PG 05-15-2015 11:04 AM
Quote:
Originally Posted by carlitos_370z (Post 3198816)
in my personal opinion... dont liked :/ I think they have to change the other parts (side skirts and rear bumper) to make a cleaner look...

But like I said... its my opinion... If the owner likes how it looks great haha!! cause that at the end of the day is what really matters :tup:
Quote:
Originally Posted by RicerX (Post 3199020)
The new side skirts are part of what makes the 2015 look so different. It creates an entirely different visual side profile of the car. It's amazing how little that front bumper does on the Nismo pictured above with the absence of the side skirts.
:iagree:

carlitos_370z 05-15-2015 12:08 PM
Quote:
Originally Posted by RicerX (Post 3199020)
The new side skirts are part of what makes the 2015 look so different. It creates an entirely different visual side profile of the car. It's amazing how little that front bumper does on the Nismo pictured above with the absence of the side skirts.
:iagree: you get my point... and the rear bumper have to see small too

LostSol 05-23-2015 10:52 AM
Quote:
Originally Posted by speedfreek (Post 3151781)
Can you install this bumper with the Zspeed undershroud?
Quote:
Originally Posted by Japanjay (Post 3163432)
Any way someone can list off the full OEM part# list everything needed?
OK so I hit a deer on my way back from Zdayz and am looking to do the front bumper conversion as long as my body shop plays ball (insurance quoted me $1100 so that should be plenty to cover this).

Can anyone confirm if it will fit with the zspeed undershroud (which I have and would like to keep)?

Also heres the parts list im looking at:

FBM22-6GA0H Front bumper $380
62087-6GA0A MOULDING Red insert $25
62086-6GA0A MOULDING Red insert $25
62077-6GA0A MOULDING Vertical insert $9
62076-6GA0A MOULDING Vertical insert $9
62064-6GA0B PROTECTOR Fender liner filler $10
62064-6GA0A PROTECTOR Fender liner filler $10

Total: $468

Am I missing anything?

zefaulter 05-23-2015 01:38 PM
Quote:
Originally Posted by LostSol (Post 3207165)
OK so I hit a deer on my way back from Zdayz and am looking to do the front bumper conversion as long as my body shop plays ball (insurance quoted me $1100 so that should be plenty to cover this).

Can anyone confirm if it will fit with the zspeed undershroud (which I have and would like to keep)?

Also heres the parts list im looking at:

FBM22-6GA0H Front bumper $380
62087-6GA0A MOULDING Red insert $25
62086-6GA0A MOULDING Red insert $25
62077-6GA0A MOULDING Vertical insert $9
62076-6GA0A MOULDING Vertical insert $9
62064-6GA0B PROTECTOR Fender liner filler $10
62064-6GA0A PROTECTOR Fender liner filler $10

Total: $468

Am I missing anything?
LEDs?

Japanjay 05-23-2015 04:49 PM
Fits the under shroud, just have to make a few new holes in the shroud. Only thing you are missing, finding all those parts. Took me 2.5 months to track everything down. Parts are being painted finally now. Skirts, bumper, spats.

Asheth 05-23-2015 08:20 PM
Quote:
Originally Posted by LostSol (Post 3207165)
OK so I hit a deer on my way back from Zdayz and am looking to do the front bumper conversion as long as my body shop plays ball (insurance quoted me $1100 so that should be plenty to cover this).

Can anyone confirm if it will fit with the zspeed undershroud (which I have and would like to keep)?

Also heres the parts list im looking at:

FBM22-6GA0H Front bumper $380
62087-6GA0A MOULDING Red insert $25
62086-6GA0A MOULDING Red insert $25
62077-6GA0A MOULDING Vertical insert $9
62076-6GA0A MOULDING Vertical insert $9
62064-6GA0B PROTECTOR Fender liner filler $10
62064-6GA0A PROTECTOR Fender liner filler $10

Total: $468

Am I missing anything?
Yea Zspeed will work get the non-nismo one. I have mine sitting in a box will be going on Thursday. Zspeed sent me everything I need for it to fit perfect with the 15 front, but you can get it to work without the extras.

Your list looks like you are missing the 15 fender liners. They come down farther and extend out a little closer to the edge of the bumper.
http://i.imgur.com/CNuokRQ.jpg
http://i.imgur.com/d7wFWVA.jpg
http://i.imgur.com/G8ttp4d.png
http://i.imgur.com/UGP0BRX.png


All times are GMT -5. The time now is 08:51 PM.
Page 29 of 77 « First 192728 29 303139 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2