What kind of 3M tape on EVOR pillar covers?

kenchan

i know wat you're taking about but dont know the part number. also, that tape makes the cover float a little bit. you can push down at it and see the cf cover flexing and bending.

if i was you, i would either not use the cover at all, use DiNoc instead, or use thin 3M permanent double sideded tape that you can buy at your office supply store.

6MT-Z34

However, I wouldn't think anything would beat this

cooltoy

This must be pretty thin. You think this will survive the wind and car washes?

kenchan

this is about twice the thickness of regular scotch tape you use at your desk. it's thin.

ive not tried it on exterior, but i presume it will work. just make sure you let the adhesive cure 24hrs before getting it wet.

and make sure the surface is clean.

the only thing i would worry is how well it will stick to the backside of the evor's cover. i recommend maybe a coat of adhesion promotor on the backside.