How do i install shine auto skirts.

inf3kted · 01-22-2014, 06:17 AM

Wondering how i go about installing the shine auto skirts... original skirts have the clips while the shine auto ones have no clips.

SOUTHZZ · 01-22-2014, 07:04 AM

Shine skirts for the 350 install using the 10mm bolts used to attach the
OEM skirts to the body.Are holes pre drilled on the Shine skirts?

inf3kted · 01-22-2014, 07:29 AM

Yep the new skirts have the holes for the bolts.

Couple on the bottom and 2 at the front and rear

DatsunFTW · 01-23-2014, 12:28 AM

I did mine myself. Use this to pull off your oem skirts. 370Z Nismo Side Sill Protector

I recommend having someone help you hold up the skirt to the car and check fitment but you don't necessarily have to. Then drill holes accordingly to the drill slots in the skirt if they match up to the holes in the oem skirts. Use the same bolts you had on the car and go ahead and put those suckers on.

I started with the wheel well screws and then put the bottom ones on, but it could be different for you. Like I stated earlier, things would run a lot smoother with a second set of hands holding the skirt up while you install the shine.

Hope this helps.

inf3kted · 01-25-2014, 10:30 PM

Was abit of a mission getting the stocks ones off

So all i need are the oem bolt holes 2 on front+rear and the bolts on the bottom? What about the middle section seeing as the new skirts don't have clips anymore

DatsunFTW · 01-26-2014, 09:12 AM

Quote:

Originally Posted by inf3kted

Was abit of a mission getting the stocks ones off

So all i need are the oem bolt holes 2 on front+rear and the bolts on the bottom? What about the middle section seeing as the new skirts don't have clips anymore

Yes. And with the middle section I just taped and fit it up as high as I could honestly.

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

01-22-2014, 06:17 AM	#1 (permalink)
inf3kted Base Member Join Date: Aug 2013 Location: australia Posts: 60 Drives: 09 370z Rep Power: 11	How do i install shine auto skirts. Wondering how i go about installing the shine auto skirts... original skirts have the clips while the shine auto ones have no clips.

01-23-2014, 12:28 AM	#4 (permalink)
DatsunFTW A True Z Fanatic Join Date: Apr 2013 Location: Gainesville, FL Posts: 1,234 Drives: 12 370z A54 M6 Rep Power: 379	I did mine myself. Use this to pull off your oem skirts. 370Z Nismo Side Sill Protector I recommend having someone help you hold up the skirt to the car and check fitment but you don't necessarily have to. Then drill holes accordingly to the drill slots in the skirt if they match up to the holes in the oem skirts. Use the same bolts you had on the car and go ahead and put those suckers on. I started with the wheel well screws and then put the bottom ones on, but it could be different for you. Like I stated earlier, things would run a lot smoother with a second set of hands holding the skirt up while you install the shine. Hope this helps. __________________ The Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shine skirts vs s-tune?	equalme	Exterior & Interior	7	01-18-2014 06:07 PM
Shine Auto/ Aero Jacket Rear Spat Install Help	Wiggins3377	Exterior & Interior	10	08-28-2012 03:27 PM
Shine Auto	Omikron	Exterior & Interior	8	05-20-2012 11:10 AM
Shine Auto Side Skirts, Rear Valences, EVO-R CF Diffuser, Nismo S-Tune CF Wing	litesky	Parts for sale (Private Classifieds)	39	04-10-2011 11:41 PM
Pic Request - Shine Auto Rear add-on side view with oem side skirts.	atx370z	Exterior & Interior	8	10-22-2010 10:51 AM

01-22-2014, 07:04 AM	#2 (permalink)
SOUTHZZ Enthusiast Member Join Date: Jan 2014 Location: ALABAMA Posts: 305 Drives: 09 NISSAN 370Z CS M6 Rep Power: 3400	Shine skirts for the 350 install using the 10mm bolts used to attach the OEM skirts to the body.Are holes pre drilled on the Shine skirts?

01-22-2014, 07:29 AM	#3 (permalink)
inf3kted Base Member Join Date: Aug 2013 Location: australia Posts: 60 Drives: 09 370z Rep Power: 11	Yep the new skirts have the holes for the bolts. Couple on the bottom and 2 at the front and rear

01-25-2014, 10:30 PM	#5 (permalink)
inf3kted Base Member Join Date: Aug 2013 Location: australia Posts: 60 Drives: 09 370z Rep Power: 11	Was abit of a mission getting the stocks ones off So all i need are the oem bolt holes 2 on front+rear and the bolts on the bottom? What about the middle section seeing as the new skirts don't have clips anymore