Where do you attach your harness?

hyunsoo1803 · 08-01-2013, 05:11 AM

I was lucky to pick up the R's tuning harness bar, but trying to figure out the cleanest way to buckle up the lower part.

I have takata 5pt harness, but planning on running 4 points for now.

For those of you who has harnesses, how did you buckle yours?

Thanks in advance.

takjak2 · 08-02-2013, 10:04 PM

I have a 4 point cage and 6 point harnesses. The anti-submarine straps clip into eye bolts through the floor pan with nuts welded to backing plates. The waist strap on the outside clips in to an eye bolt that replaces the seat belt bolt. On the other side my Wedge Engineering seat brackets have a threaded bracket for the stock clasp to bolt into; eye bolt goes there. Everything is the same thread pitch.

I strongly suggest not running 4 points, or harnesses with the stock seats.

hyunsoo1803 · 08-03-2013, 05:07 AM

Quote:

Originally Posted by takjak2

I have a 4 point cage and 6 point harnesses. The anti-submarine straps clip into eye bolts through the floor pan with nuts welded to backing plates. The waist strap on the outside clips in to an eye bolt that replaces the seat belt bolt. On the other side my Wedge Engineering seat brackets have a threaded bracket for the stock clasp to bolt into; eye bolt goes there. Everything is the same thread pitch.

I strongly suggest not running 4 points, or harnesses with the stock seats.

I guess eye bolts are the only option thanks

08-01-2013, 05:11 AM	#1 (permalink)
hyunsoo1803 Track Member Join Date: Mar 2010 Location: Canada Posts: 556 Drives: 370z Rep Power: 16	Where do you attach your harness? I was lucky to pick up the R's tuning harness bar, but trying to figure out the cleanest way to buckle up the lower part. I have takata 5pt harness, but planning on running 4 points for now. For those of you who has harnesses, how did you buckle yours? Thanks in advance. __________________ \|Stillen\|KW\|Volks\|Evo-R\|Bridgestone\|Hotchikis\|Project Kics\|Southbend\|Berk\|Status\|Innovate\|Nismo\|Greddy\|

08-02-2013, 10:04 PM	#2 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 142	I have a 4 point cage and 6 point harnesses. The anti-submarine straps clip into eye bolts through the floor pan with nuts welded to backing plates. The waist strap on the outside clips in to an eye bolt that replaces the seat belt bolt. On the other side my Wedge Engineering seat brackets have a threaded bracket for the stock clasp to bolt into; eye bolt goes there. Everything is the same thread pitch. I strongly suggest not running 4 points, or harnesses with the stock seats. hyunsoo1803 likes this. __________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Harness bar?	MightyBobo	Track / Autocross / Drifting / Dragstrip	10	12-01-2013 02:59 AM
Does anyone remember how illuminated kick plates attach?	dmhenderson	Mid-Atlantic Region	30	05-26-2013 02:05 PM
4 Point Harness and Harness Bar Question	sixpax	Track / Autocross / Drifting / Dragstrip	4	06-13-2012 01:04 PM
Where to attach ground wire?	seande	Audio & Video	6	03-06-2011 08:35 AM
Q. What should I use for attach the Z emblem?	Click	Exterior & Interior	5	01-07-2011 06:53 AM