Body panels popping loose?

Trips · 07-20-2013, 03:05 PM

I would go with making sure the bumper is installed properly from the bottom

Once the bumper snaps into the clips

The 10mm head screw on the inside of the fender liner? Should secure it from moving as that what its there for.

I honestly think the bumpers not installed right

DEpointfive0 · 07-20-2013, 03:10 PM

Quote:

Originally Posted by Trips

I would go with making sure the bumper is installed properly from the bottom

Once the bumper snaps into the clips

The 10mm head screw on the inside of the fender liner? Should secure it from moving as that what its there for.

I honestly think the bumpers not installed right

99% chance your issue

Goodtime · 07-22-2013, 07:32 AM

Thanks for the suggestions. The under tray is all intact. Looks like if I take the wheel off and remove the fender wheelwell liner I would be able to see whats going on. Technically this is my wife's car and I don't wrench on it, she lets the dealership do all the work so I will probably just do all the "homework" on it and let the "pros" hadle it. I'll keep you all posted on the outcome.

07-20-2013, 03:05 PM	#1 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland Posts: 8,736 Drives: 🔰 Rep Power: 10	I would go with making sure the bumper is installed properly from the bottom Once the bumper snaps into the clips The 10mm head screw on the inside of the fender liner? Should secure it from moving as that what its there for. I honestly think the bumpers not installed right __________________ Last edited by Trips; 07-20-2013 at 03:08 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] OEM Body Panels Front, Rear and Sides in Solid Red	Eagle	Parts for sale (Private Classifieds)	57	05-16-2014 12:08 PM
Nismo 370z body panels	bullitt5897	Exterior & Interior	344	05-27-2011 11:33 AM
Yellow owners, Body panels not matching?	Csquared	Exterior & Interior	17	03-25-2010 03:48 PM
Fender Body Panels	Jason	Exterior & Interior	10	10-17-2009 10:11 AM

07-22-2013, 07:32 AM	#3 (permalink)
Goodtime Base Member Join Date: Mar 2012 Location: N AL Posts: 4 Drives: 10 370Z Rep Power: 15	Thanks for the suggestions. The under tray is all intact. Looks like if I take the wheel off and remove the fender wheelwell liner I would be able to see whats going on. Technically this is my wife's car and I don't wrench on it, she lets the dealership do all the work so I will probably just do all the "homework" on it and let the "pros" hadle it. I'll keep you all posted on the outcome.