My new side splitters :)

RyanWest · 05-16-2013, 10:54 AM

So my side skirt panels were getting beat up bad. Im assuming because the car sits so low so.

What do you guys think?

kenchan · 05-16-2013, 11:20 AM

did you make this on your own or a evo-r piece or?

DEpointfive0 · 05-16-2013, 11:22 AM

Quote:

Originally Posted by kenchan

did you make this on your own or a evo-r piece or?

Kinda looks home made, I don't mind actually

RyanWest · 05-16-2013, 11:25 AM

My buddy made them for me. I just take the pictures for his website he sell them on.

DEpointfive0 · 05-16-2013, 11:27 AM

Quote:

Originally Posted by RyanWest

My buddy made them for me. I just take the pictures for his website he sell them on.

Plastic I assume?
If so, what kind? And just Di-Noc wrapped?

MX52Z · 05-16-2013, 11:28 AM

Since you're asking for opinions, I think it looks like a fancy slab. It should taper in a little at the front and flare out a little at the rear, perhaps rounding the corners would help a little too. Pretty neat effort though.

RyanWest · 05-16-2013, 11:31 AM

Quote:

Originally Posted by MX52Z

Since you're asking for opinions, I think it looks like a fancy slab. It should taper in a little at the front and flare out a little at the rear, perhaps rounding the corners would help a little too. Pretty neat effort though.

It actually does taper in the front a little. i guess you cant tell in the picture.

I like the strong solid corners, adds an extra body line to the car.

NickTurnon · 05-16-2013, 11:33 AM

I'd probably prefer the edges to be tapered more towards the body lines. That way it doesn't look like we wrapped a 2x4 to the sides of the car.

Still sexy though..

DEpointfive0 · 05-16-2013, 11:45 AM

Quote:

Originally Posted by NickTurnon

I'd probably prefer the edges to be tapered more towards the body lines. That way it doesn't look like we wrapped a 2x4 to the sides of the car.

Still sexy though..

RyanWest · 05-16-2013, 11:57 AM

U haven't used dinoc then. I've had it on my roof for nearly two years with no fading. Please don't put out false info and I have my a pillars wrapped with no fading.

scottIN · 05-16-2013, 12:05 PM

Quote:

Originally Posted by RyanWest

U haven't used dinoc then. I've had it on my roof for nearly two years with no fading. Please don't put out false info and I have my a pillars wrapped with no fading.

I've used a lot of DiNoc. It's not about fading, it's about chipping from rocks. Ask anyone with side blades. You'll see...

RyanWest · 05-16-2013, 12:06 PM

Quote:

Originally Posted by scottIN

I've used a lot of DiNoc. It's not about fading, it's about chipping from rocks. Ask anyone with side blades. You'll see...

I think your missing the entire purpose on why i had them made!!!!

NickTurnon · 05-16-2013, 12:10 PM

Quote:

Originally Posted by scottIN

I've used a lot of DiNoc. It's not about fading, it's about chipping from rocks. Ask anyone with side blades. You'll see...

Either way, you can pick up a can of clear Glossifer or even a clear coat that plasti-dip has come up with that sprays down both side skirts and will act as a clearbra.

You can use the dip on your eVO-R side skirts as well.

I personally prefer using 3M but for this concept, either works great!

RyanWest · 05-16-2013, 12:12 PM

Quote:

Originally Posted by NickTurnon

Either way, you can pick up a can of clear Glossifer or even a clear coat that plasti-dip has come up with that sprays down both side skirts and will act as a clearbra.

You can use the dip on your eVO-R side skirts as well.

I personally prefer using 3M but for this concept, either works great!

didnt even think about that, might pick up a can tonight!

05-16-2013, 11:33 AM	#8 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 34 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 19	I'd probably prefer the edges to be tapered more towards the body lines. That way it doesn't look like we wrapped a 2x4 to the sides of the car. Still sexy though.. __________________ 2009 Brilliant Silver BASE 7AT \| TEIN S-Tech Springs \| K&N Drop Ins & z1 Maf Tubes \| AAM S-Line Short Tails \| 5% Tint \| 20MM Spacers \| Sport Spoiler NickTurnon's 370z Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wannaGOFAST - Georgia 1/2 Mile, Side-By-Side, Private Runway Shootout - 9.14-9.15.13!	wannaGOFAST	South East Region	1	04-10-2013 12:27 PM
wannaGOFAST - Florida 1/2 Mile, Side-By-Side, Private Runway Shootout! March 23rd!!	wannaGOFAST	South East Region	0	02-11-2013 09:40 PM
Chicago 1/2 Mile, Side-By-Side, Private Runway Shootout!! June 1st & 2nd!!	wannaGOFAST	Mid Western Region	4	02-01-2013 11:27 AM
Georgia 1/2 Mile, Side-By-Side, Private Runway Shootout 9.22.12!!	wannaGOFAST	South East Region	0	06-06-2012 02:26 PM
Pic Request - Shine Auto Rear add-on side view with oem side skirts.	atx370z	Exterior & Interior	8	10-22-2010 10:51 AM

05-16-2013, 11:20 AM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	did you make this on your own or a evo-r piece or?

05-16-2013, 11:25 AM	#4 (permalink)
RyanWest Track Member Join Date: Jan 2012 Location: Tamp, Fl Posts: 714 Drives: 2009 Nissan Rep Power: 34	My buddy made them for me. I just take the pictures for his website he sell them on.

05-16-2013, 11:28 AM	#6 (permalink)
MX52Z Enthusiast Member Join Date: Dec 2012 Location: Port Charlotte, FL Posts: 471 Drives: Z'less por ahora Rep Power: 13	Since you're asking for opinions, I think it looks like a fancy slab. It should taper in a little at the front and flare out a little at the rear, perhaps rounding the corners would help a little too. Pretty neat effort though.

05-16-2013, 11:57 AM	#10 (permalink)
RyanWest Track Member Join Date: Jan 2012 Location: Tamp, Fl Posts: 714 Drives: 2009 Nissan Rep Power: 34	U haven't used dinoc then. I've had it on my roof for nearly two years with no fading. Please don't put out false info and I have my a pillars wrapped with no fading.