Scubasubikers build thread

Scubasubiker · 03-09-2013, 05:53 PM

Ok so bought a new 2013 370z sport. After I got sound and tint installed, next order of biz is... Wipe that s**t eating 2013 grin off Josephie's face and give her a bad a** Stillen evil smile complete with fangs. This thread will encompass the removal, fit, placement of the vertical led lights (not on the stillen bumper and must be fabricated), and paint job plus completion. Stay tuned... I can only work on this stuff Thurs through Sat. In my dads shop.

Mr&Mrs · 03-09-2013, 06:02 PM

Sounds great, im in!

SS_Firehawk · 03-09-2013, 06:43 PM

Good call fixing your fangless Z :P

Mike · 03-09-2013, 07:11 PM

sounds like a great plan! looking forward to seeing how you integrate the lights.

Scubasubiker · 03-09-2013, 07:17 PM

So here's the front and side skirts

So spent the late afternoon removing front bumper ( incomplete) so I could check stillen for fit. Going effing crazy trying to remove headlights which appears to be a pre-requisite . Going to comb the threads here for advice on thAt, but about to yank my hair out. I'm pretty smart, but there's gotta be a trick. Anyone have a manual or link for this?

gomer_110 · 03-09-2013, 07:32 PM

Removing the front fascia is very easy. Just took mine off today. To answer your question, THE HEADLIGHTS DO NOT HAVE TO BE REMOVED. As far as a DIY goes check out the Stillen G3 DIY's. Hope this helps.

Edit: Here's a DIY: DIY - Front Bumper Removal

Just a short description of removal: remove under engine splash shield, remove pop clips just under the front of the hood, remove bolts behind fender liner (1 on each side), gently pull outward on top edge of fascia starting on the outsides and working towards the center.

Hope this helps

Scubasubiker · 03-09-2013, 07:37 PM

Checking out now THX! prefer to keep most of my hair! And I tend to be a "don't read the directions, DIY the hard way, then bitch" kinda girl.

Scubasubiker · 03-09-2013, 07:46 PM

Ah, yeah...already did all that and That looks only marginally like my front end. LEDs are a major hurdle and in front of the wiper fluid box/ headlights and cramed in like sardines. Managed to remove right but left with WF box in way... Frustrated.

Scubasubiker · 03-09-2013, 08:16 PM

Did get nismo spoiler installed today! So not totally irritating day... And I laugh a bit at that. I do bitch when I'm frustrated, but I understand and appreciate this part is a fun learning process. New skills and a challenge= Happy Suzanne!

Mike · 03-09-2013, 08:32 PM

you have to remove the washer fluid box to install the bumper. Stillen sells a smaller one, or you can just go without a washer.

Scubasubiker · 03-11-2013, 04:25 AM

What I got accomplished today...

Removed old wiper fluid box and installed stillen supplied new one. It's pretty cheesy: first it's not made to fit the wheel well mold so the anchor points aren't flush. Second, where they want you mount it, it is impossible to installe the back screw so I had to drill a hole and zip tie the whole thing to the frame to keep it securely fastened. Third, it doesn't have a place for the float sensor so they make you flip it upside down and zip tie that in so it fakes the system out and thinks the washer fluid is full. Lastly, and my biggest bitch here is that it doesn't seal well to the OEM neck so if you overfill the tank, it's gonna leak.

Scubasubiker · 03-11-2013, 04:30 AM

Foam insert modification...

The Nissan foam insert doesn't fit the stillen fascia so I had to saw a chunk of foam off, then sand it down to match the left and right curvature .

Scubasubiker · 03-11-2013, 04:47 AM

Preliminary stillen bumper fitting. Initially, this did not fit well due to me having removed the under bumper splash guards and tire wind deflectors. The bumper is so flexible it needed the support from the bottom.

Pretty nice and tight for not even having any holes drilled yet or the 3 piece fascia epoxied together yet.

I did put in a couple temporary pop rivets to check hood clearance. Having an issue with the left hood latch not wanting to latch which is causing a gap. Tried to fix with the adjustment knob, but it looks like a latch issue so I guess I'll delve into that when I get back to working on this next Thurs. Next order of business...epoxy 3 piece bumper, refit, drill holes and mount. Then do research on what will actually bond to this urethane material so I can fabricate something for the OEM LEDs. If I find that nothing bonds to this crap, I'll scrap the idea and install some led strip lighting, but I REALLY want to keep the cool LEDs. LOVE the shape!

Scubasubiker · 03-11-2013, 04:51 AM

Oh and Gomer, thanks SOO much for the link. Wish I would have read that first. Coulda saved me about 3 hours of wasted time.

DEpointfive0 · 03-11-2013, 05:16 AM

I LOVE the Stillen front

I'm SOOOOO JEALOUS

03-09-2013, 05:53 PM	#1 (permalink)
Scubasubiker Base Member Join Date: Feb 2013 Location: Joplin, MO Posts: 105 Drives: Like I boosted it! Rep Power: 12	Scubasubikers build thread Ok so bought a new 2013 370z sport. After I got sound and tint installed, next order of biz is... Wipe that st eating 2013 grin off Josephie's face and give her a bad a Stillen evil smile complete with fangs. This thread will encompass the removal, fit, placement of the vertical led lights (not on the stillen bumper and must be fabricated), and paint job plus completion. Stay tuned... I can only work on this stuff Thurs through Sat. In my dads shop. Mike, DEpointfive0 and mr300zxc like this.

03-09-2013, 06:02 PM	#2 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,190 Drives: RZ34 Rep Power: 15161	Sounds great, im in! __________________ Project Z <--Click - Check out the link too many mods to list!

03-09-2013, 06:43 PM	#3 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	Good call fixing your fangless Z :P __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

03-09-2013, 07:11 PM	#4 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	sounds like a great plan! looking forward to seeing how you integrate the lights. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

03-09-2013, 07:17 PM	#5 (permalink)
Scubasubiker Base Member Join Date: Feb 2013 Location: Joplin, MO Posts: 105 Drives: Like I boosted it! Rep Power: 12	So here's the front and side skirts So spent the late afternoon removing front bumper ( incomplete) so I could check stillen for fit. Going effing crazy trying to remove headlights which appears to be a pre-requisite . Going to comb the threads here for advice on thAt, but about to yank my hair out. I'm pretty smart, but there's gotta be a trick. Anyone have a manual or link for this? Last edited by Scubasubiker; 03-11-2013 at 02:09 PM.

03-09-2013, 07:32 PM	#6 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36940	Removing the front fascia is very easy. Just took mine off today. To answer your question, THE HEADLIGHTS DO NOT HAVE TO BE REMOVED. As far as a DIY goes check out the Stillen G3 DIY's. Hope this helps. Edit: Here's a DIY: DIY - Front Bumper Removal Just a short description of removal: remove under engine splash shield, remove pop clips just under the front of the hood, remove bolts behind fender liner (1 on each side), gently pull outward on top edge of fascia starting on the outsides and working towards the center. Hope this helps Scubasubiker likes this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock Last edited by gomer_110; 03-09-2013 at 07:35 PM.

03-09-2013, 07:37 PM	#7 (permalink)
Scubasubiker Base Member Join Date: Feb 2013 Location: Joplin, MO Posts: 105 Drives: Like I boosted it! Rep Power: 12	Checking out now THX! prefer to keep most of my hair! And I tend to be a "don't read the directions, DIY the hard way, then bitch" kinda girl. DEpointfive0 likes this.

03-09-2013, 07:46 PM	#8 (permalink)
Scubasubiker Base Member Join Date: Feb 2013 Location: Joplin, MO Posts: 105 Drives: Like I boosted it! Rep Power: 12	Ah, yeah...already did all that and That looks only marginally like my front end. LEDs are a major hurdle and in front of the wiper fluid box/ headlights and cramed in like sardines. Managed to remove right but left with WF box in way... Frustrated.

03-09-2013, 08:16 PM	#9 (permalink)
Scubasubiker Base Member Join Date: Feb 2013 Location: Joplin, MO Posts: 105 Drives: Like I boosted it! Rep Power: 12	Did get nismo spoiler installed today! So not totally irritating day... And I laugh a bit at that. I do bitch when I'm frustrated, but I understand and appreciate this part is a fun learning process. New skills and a challenge= Happy Suzanne!

03-09-2013, 08:32 PM	#10 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	you have to remove the washer fluid box to install the bumper. Stillen sells a smaller one, or you can just go without a washer. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

03-11-2013, 04:25 AM	#11 (permalink)
Scubasubiker Base Member Join Date: Feb 2013 Location: Joplin, MO Posts: 105 Drives: Like I boosted it! Rep Power: 12	What I got accomplished today... Removed old wiper fluid box and installed stillen supplied new one. It's pretty cheesy: first it's not made to fit the wheel well mold so the anchor points aren't flush. Second, where they want you mount it, it is impossible to installe the back screw so I had to drill a hole and zip tie the whole thing to the frame to keep it securely fastened. Third, it doesn't have a place for the float sensor so they make you flip it upside down and zip tie that in so it fakes the system out and thinks the washer fluid is full. Lastly, and my biggest bitch here is that it doesn't seal well to the OEM neck so if you overfill the tank, it's gonna leak.

03-11-2013, 04:30 AM	#12 (permalink)
Scubasubiker Base Member Join Date: Feb 2013 Location: Joplin, MO Posts: 105 Drives: Like I boosted it! Rep Power: 12	Foam insert modification... The Nissan foam insert doesn't fit the stillen fascia so I had to saw a chunk of foam off, then sand it down to match the left and right curvature .

03-11-2013, 04:47 AM	#13 (permalink)
Scubasubiker Base Member Join Date: Feb 2013 Location: Joplin, MO Posts: 105 Drives: Like I boosted it! Rep Power: 12	Preliminary stillen bumper fitting. Initially, this did not fit well due to me having removed the under bumper splash guards and tire wind deflectors. The bumper is so flexible it needed the support from the bottom. Pretty nice and tight for not even having any holes drilled yet or the 3 piece fascia epoxied together yet. I did put in a couple temporary pop rivets to check hood clearance. Having an issue with the left hood latch not wanting to latch which is causing a gap. Tried to fix with the adjustment knob, but it looks like a latch issue so I guess I'll delve into that when I get back to working on this next Thurs. Next order of business...epoxy 3 piece bumper, refit, drill holes and mount. Then do research on what will actually bond to this urethane material so I can fabricate something for the OEM LEDs. If I find that nothing bonds to this crap, I'll scrap the idea and install some led strip lighting, but I REALLY want to keep the cool LEDs. LOVE the shape! DEpointfive0 likes this.

03-11-2013, 04:51 AM	#14 (permalink)
Scubasubiker Base Member Join Date: Feb 2013 Location: Joplin, MO Posts: 105 Drives: Like I boosted it! Rep Power: 12	Oh and Gomer, thanks SOO much for the link. Wish I would have read that first. Coulda saved me about 3 hours of wasted time. DEpointfive0 likes this.

03-11-2013, 05:16 AM	#15 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	I LOVE the Stillen front I'm SOOOOO JEALOUS Scubasubiker likes this. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ENT-Z Build Thread	ENT-Z	Member's 370Z Gallery	68	09-06-2014 10:00 PM
Engine Build Thread	DIGItonium	Forced Induction	113	04-07-2013 01:17 PM
California build thread	bigaudiofanat	Audio & Video	95	01-27-2012 11:00 PM
Falcor's build thread	Falcor	Member's 370Z Gallery	18	02-17-2011 07:36 AM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 05:24 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode