New hood coming soon

SpawnAeroJohn · 09-26-2009, 07:13 PM

Well you all know that from the start of summer we have been speaking of a new style hood and this is something that we have been working on off and on when ever we have some spare time and yesterday we finished shaping. It took many hrs to fine tune all the lines so that each side are both nice and even so here is the prototype so far.

What we still have to do is reshape the edges and figure out how we are going to take care of the vents. Our ideas so far are to have glass fill in those 6 vents to flush everything out nicely and have the glass perforated for ventilation. I haven’t seen that done before so I think it would be unique and neat. It should give it a nice exotic look.

I'm not sure when we will be done since its a side project but due to waiting for more materials to arrive on Tuesday we will have all Monday to work on the hood plus another project for the Z we are currently working on.

I'll take much better pictures once we have it primed.

We dont have pictures of it on a Z but if anybody is willing to stop by then I'd be glad to mock it up.

We hope you guys like the hood as we will be sticking to this concept design and if there’s enough interest we will then start reproducing. Stay tuned for updates

theDreamer · 09-26-2009, 07:15 PM

Does this hood keep the stock lines and just add vents per say to the edges?
From one picture I feel like I see two lines running along the hood like the stock hood.

SpawnAeroJohn · 09-26-2009, 07:25 PM

We made it specifically to follow the lines. Each vent going up gets a tad wider and wider just to follow with the edges of the hood, and the body lines in the center. Othe rhoods you see have the vent lines going in different directions. Not this one! I'll see if I have a picture of it indoors.

Scribe · 09-26-2009, 09:41 PM

Quote:

Originally Posted by SpawnAeroJohn

We made it specifically to follow the lines. Each vent going up gets a tad wider and wider just to follow with the edges of the hood, and the body lines in the center. Othe rhoods you see have the vent lines going in different directions. Not this one! I'll see if I have a picture of it indoors.

Vents. Clean vents with an aggressive rake. Like this, but more aggressive of a rake.

nogoodname · 09-26-2009, 09:55 PM

make one like this that follows the angle of the 370z hood lines

SpawnAeroJohn · 09-26-2009, 10:01 PM

Ours are following the angles of the hood line.

I believe it will look totally sick once we get the tinted glass inserts

CrownR426 · 09-26-2009, 10:38 PM

Quote:

Originally Posted by SpawnAeroJohn

Well you all know that from the start of summer we have been speaking of a new style hood and this is something that we have been working on off and on when ever we have some spare time and yesterday we finished shaping. It took many hrs to fine tune all the lines so that each side are both nice and even so here is the prototype so far.

What we still have to do is reshape the edges and figure out how we are going to take care of the vents. Our ideas so far are to have glass fill in those 6 vents to flush everything out nicely and have the glass perforated for ventilation. I haven’t seen that done before so I think it would be unique and neat. It should give it a nice exotic look.

I'm not sure when we will be done since its a side project but due to waiting for more materials to arrive on Tuesday we will have all Monday to work on the hood plus another project for the Z we are currently working on.

I'll take much better pictures once we have it primed.

We dont have pictures of it on a Z but if anybody is willing to stop by then I'd be glad to mock it up.

We hope you guys like the hood as we will be sticking to this concept design and if there’s enough interest we will then start reproducing. Stay tuned for updates

Did u guys find a z?!

SpawnAeroJohn · 09-26-2009, 10:45 PM

Not yet :P

bullitt5897 · 09-27-2009, 09:19 AM

Looking Great John!

phelan · 09-27-2009, 12:35 PM

reminds me of a seibon TS hood...

SpawnAeroJohn · 09-27-2009, 01:48 PM

I fail to see the resemblance?^^

09-26-2009, 07:13 PM	#1 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	New hood coming soon Well you all know that from the start of summer we have been speaking of a new style hood and this is something that we have been working on off and on when ever we have some spare time and yesterday we finished shaping. It took many hrs to fine tune all the lines so that each side are both nice and even so here is the prototype so far. What we still have to do is reshape the edges and figure out how we are going to take care of the vents. Our ideas so far are to have glass fill in those 6 vents to flush everything out nicely and have the glass perforated for ventilation. I haven’t seen that done before so I think it would be unique and neat. It should give it a nice exotic look. I'm not sure when we will be done since its a side project but due to waiting for more materials to arrive on Tuesday we will have all Monday to work on the hood plus another project for the Z we are currently working on. I'll take much better pictures once we have it primed. We dont have pictures of it on a Z but if anybody is willing to stop by then I'd be glad to mock it up. We hope you guys like the hood as we will be sticking to this concept design and if there’s enough interest we will then start reproducing. Stay tuned for updates Last edited by SpawnAeroJohn; 09-26-2009 at 10:09 PM.

09-26-2009, 07:15 PM	#2 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Does this hood keep the stock lines and just add vents per say to the edges? From one picture I feel like I see two lines running along the hood like the stock hood. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

09-27-2009, 09:19 AM	#9 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Looking Great John! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

09-27-2009, 12:35 PM	#10 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	reminds me of a seibon TS hood... __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan 370z Raised Hood Kit / Hood Spacer Kit	Mak	Exterior & Interior	39	12-20-2020 10:24 AM
hood strut kit?	racerxj17	Nissan 370Z General Discussions	14	07-31-2009 09:16 PM
Carbon Fiber Hood	Jammer8	Exterior & Interior	10	06-21-2009 02:11 PM
Crooked Hood?	jonjiang	Nissan 370Z General Discussions	12	05-28-2009 03:28 PM
370Z Hood	The Weapon	Nissan 370Z General Discussions	8	03-22-2009 09:03 PM

09-26-2009, 07:25 PM	#3 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	We made it specifically to follow the lines. Each vent going up gets a tad wider and wider just to follow with the edges of the hood, and the body lines in the center. Othe rhoods you see have the vent lines going in different directions. Not this one! I'll see if I have a picture of it indoors.

09-26-2009, 09:55 PM	#5 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1764	make one like this that follows the angle of the 370z hood lines

09-26-2009, 10:01 PM	#6 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	Ours are following the angles of the hood line. I believe it will look totally sick once we get the tinted glass inserts

09-26-2009, 10:45 PM	#8 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	Not yet :P

09-27-2009, 01:48 PM	#11 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	I fail to see the resemblance?^^