LED Landing Strip as Turnsignals

DEpointfive0

Yes, I know a lot of people who have done it back in Dallas, I'll see if I can have them chime in

Nut_N_Much

So it am not an expert but Yellow wire is constant power, take a test light and test the blue wire with the turn signal on.. It should pulse, if so try wiring to the black and blue if the blue pulses. That should get it flashing, not sure how to get it to stay on when not turning.

I would try also connecting to the yellow. When the lights are on that yellow should light them up, and when turning the blue would disrupt the power, the black is the ground. If that's not it the connect the ground to the blue and power to the yellow.

Attached was for another guy. On the inside off the light the colors are correct outside they are striped.

Thats all I can think of brother. Man I just read what I wrote and it sound like I'm on crack but its a process of elimination.

Attached Images

user33651_pic60824_1358731041.jpg (105.4 KB, 50 views)

sinceday1

Thanks Nut, I'll give that a try.

If anyone has done this and is 100% certain, i would still like to get some help.