Nissan 370Z Forum
Page 9 of 32 « First 78 9 101119 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   Interest check - ~Kellyefields~ custom hood damper kit (http://www.the370z.com/exterior-interior/65969-interest-check-kellyefields-custom-hood-damper-kit.html)

MX52Z 02-15-2013 12:25 PM
Checking in for video.

DR_ 02-15-2013 02:20 PM
Well now at least I don't feel like a complete hack by stripping out both ball bolts :shakes head: kellyefields is sending me a new set though :tup:

kellyefields 02-15-2013 03:08 PM
Quote:
Originally Posted by DR_ (Post 2167126)
Well now at least I don't feel like a complete hack by stripping out both ball bolts :shakes head: kellyefields is sending me a new set though :tup:
I am getting those out to you soon. again I apologize for the problem. I had put the bolt on there and did not tightn it down the entire way. I made an assumption and it made me look like an XXX. If any one else needs new studs and bolts let me know and I will get those out to you at no charge since I made the mistake.

New thread size requires a 5/16" - 18 hex nut.
available at any autoparts store or hardware store for under $1.

Quote:
Originally Posted by MX52Z (Post 2166840)
Checking in for video.
uploading the video now to youtube. should be up shortly.

chpt11 02-15-2013 04:13 PM
Thanks
 
3 Attachment(s)
Thanks for your help with the hood kit Kelly! Looks great!

TerribleONE 02-15-2013 04:16 PM
sent the funds last night :tup:

dmhenderson 02-15-2013 04:35 PM
Quote:
Originally Posted by kellyefields (Post 2167212)
I am getting those out to you soon. again I apologize for the problem. I had put the bolt on there and did not tightn it down the entire way. I made an assumption and it made me look like an XXX. If any one else needs new studs and bolts let me know and I will get those out to you at no charge since I made the mistake.

New thread size requires a 5/16" - 18 hex nut.
available at any autoparts store or hardware store for under $1.



uploading the video now to youtube. should be up shortly.
Oh no! What a huge inconvenience!


(I'm kidding)
Seriously though don't beat yourself up. You basically came out of retirement to build these things for us at virtually no profit just because we asked. I'll swing by home depot in the morning.

kellyefields 02-15-2013 04:39 PM
Quote:
Originally Posted by dmhenderson (Post 2167418)
Oh no! What a huge inconvenience!


(I'm kidding)
Seriously though don't beat yourself up. You basically came out of retirement to build these things for us at virtually no profit just because we asked. I'll swing by home depot in the morning.
what I did was go off of my old specs and because these uses a longer stud for ease of installation but this new company uses a different thread pitch. I put a bolt on there and it started just fine but I did not screw it all the way down. but now I know so any orders that go out from here on out will be right. thanks for understanding.

video is finishing up right now so I will post it if it works.

kellyefields 02-15-2013 04:53 PM
Youtube is the worst thing. I spent the last hour trying to upload and it gets to the end and tells me it is to long and I have to verify before posting such a long video I do that and then it deletes the video. WTF!!!! so I am now uploading for the second time. Going to a movie with the wife and let it do its thing and will post the link when I get home. here is the link that it says it will be at in 120 min!!! http://youtube/KAjcPt2JBvY so we will see it that works.

Nut_N_Much 02-15-2013 06:03 PM
3 Attachment(s)
Quote:
Originally Posted by kellyefields (Post 2167456)
Youtube is the worst thing. I spent the last hour trying to upload and it gets to the end and tells me it is to long and I have to verify before posting such a long video I do that and then it deletes the video. WTF!!!! so I am now uploading for the second time. Going to a movie with the wife and let it do its thing and will post the link when I get home. here is the link that it says it will be at in 120 min!!! http://youtube/KAjcPt2JBvY so we will see it that works.
Video not loading brother..

chptr11, good see you again.. nice car! Drive :driving: like ya stole it :tup:

chpt11 02-15-2013 08:39 PM
That was the funniest thing. Seeing you taking pictures. Can't wait to for the next show. I'd really like to work with you and kelly to make the Z show worthy! Spacers and Stillen, here we come! :icon17:

kellyefields 02-15-2013 09:06 PM
Finally loaded. :tup:

http://www.youtube.com/watch?v=KAjcPt2JBvY

JB1 02-15-2013 10:12 PM
Hey Kelly, you make it look way to complicated. It only took me about 8 minutes to install this kit...

Zoren 370 02-15-2013 10:28 PM
Cool nice DIY video. See you guys on the 24th in Gainesville.
So I can get some autographs from you guys.:tup:

dmhenderson 02-15-2013 10:30 PM
Maryland 'Z Club

Ad posted.

kellyefields 02-16-2013 11:03 AM
all orders shipped out. I have 6 left from this buy. I have fixed the bolts so those are no longer an issue. if anyone has any questions let me know. Probably wont be doing another one of these for a while so get them while they last.


All times are GMT -5. The time now is 05:46 AM.
Page 9 of 32 « First 78 9 101119 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2