It's just like buying tools and then inventing the project. buy the pillar to justify your turbo purchase

I think i need one of these in my life.

Gale, PM'd you for single premium shipping to UK.

:iagree: Yes, yes you do.

Yes he does :tup:

Well just waiting for the maker to get back to me. :-)

Done :tiphat:

Price of singe and double no CF to 87506

Thanks!

Done. :tiphat:

Just finished a special pillar for a forum member located in Germany.

https://scontent-b-ord.xx.fbcdn.net/...74611094_n.jpg

https://fbcdn-sphotos-d-a.akamaihd.n...80101898_n.jpg

In case anyone needs a custom a-pillar for a single 52mm gauge, I currently have a single pod Premium a-pillar ready to ship. No waiting.

Have a right side drive or not?

Not at this time. One could be fabricated as a one-off piece.

i will get one of these one day gale...ugh, if only money wasnt so tight lately

No problem. I'm here for you when you're ready. :tiphat:

Still have a single gauge pod for sale?
 

do you still have the single gauge pod for sale?. I'm just down the road in Newtonville and have been looking at your excellent work. If you have one I would love to buy it and install in my Z this winter. Thanks Terry

Can you PM me price for single and double w/o CF shipped to Taiwan? Thanks.

Wow I didn't realize you were selling these like that. Last I checked you weren't sure about the cost of doing business on the forum. Any who can you pm me the price of a tripple w/carbon please.

Done, done, and done. :tiphat:

These are absolutely gorgeous. Can you PM me a price for both a single and a double no carbon to 37130? Thanks man. Youre a beast.

Done :tiphat:

So.... Who is going to be the first to install these in one of my pillars?

https://fbcdn-sphotos-c-a.akamaihd.n...08411657_n.jpg

gauge size and what type of boost controller is it?

52mm...

Here is more info, SCG-1 Solenoid Boost Controller Gauge

Omg that's a must have. Two in one! Wow.

Does that seem under priced when you consider what a TurboSmart E Boost 2 and Innovate A/F gauge costs? If it is really good that will save some good coin. Anyone running this gauge yet?

I was surprised to see the price too. I might pick this up to install during the winter downtime.

Two more going out,

https://farm4.staticflickr.com/3917/...3b8fbba9_c.jpgUntitled by J M Gale, on Flickr

This is very cool, but I have to say, I have had a bunch of issues with my MTX-L. And based on talking to other people with them, I'm not alone. I used to have one of Innovate's analog gauges and it was a trooper for years, but my current gauge hasn't made it 500 miles without issues. Not sure I would trust them with my boost control at this point.

What issues are/were you having with your MTX-L?

I'm also curious to know. I've been running an MTX-L that I've used to tune my car at 1.6 bar and have it wired into my ECU as well for closed loop operation and data-logging with no complaints so far (knock on wood haha)

The gauge gets stuck at "Htr" indefinitely. I have tried recalibrating the sensor multiple times and it has not improved the situation. Innovate's support has been responsive, but not terribly helpful. The gauge/sensor only has about 500 miles on it.

Mine will bounce around, then gets stuck and displays E8! I haven't called Innovative yet. Not sure it will help! How do you reset it?

Thanks for the information guys. I will look for an alternative gauge to recommend.

To recalibrate it, you want to take the sensor out of the exhaust pipe to expose it to free air, then unplug the sensor at the harness (likely under the hood somewhere), then turn the car on and let the gauge run through it's cycle. It will give an E2 error (no sensor) and wipe the calibration. After that, reconnect the sensor harness (but leave the sensor in free air) and power the gauge. It will go through a new calibration. After that, reinstall the sensor and hope for the best! :ugh2:

Thanks for the info my friend!

Gale, please PM me about prices for a single and a double gauge.
Do you do different styles?

Thanks

Done :tiphat:

Price for a single with silver trim ring to 00767?

For the sake of feedback. I got my pod in and it looks really clean. The build quality is good, the part looks like it came with the car, and the customer service is unreal. No complaints here and i am very satisfied.

Sorry to derail doesn't anyone have any pics on how they routed the wires for innovate lc1/lc2? Wanting to know easiest way to route the sensor wiring