Nissan 370Z Forum
Page 8 of 16 « First 67 8 910 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   Custom A-Pillar gauge pod - lots of pictures (http://www.the370z.com/exterior-interior/64959-custom-pillar-gauge-pod-lots-pictures.html)

muzik212 09-01-2014 02:00 PM
Second for positive feedback. I got my dual gauge pod pillar, so clean, looks stock, great work and great communication. Should be able to post some pics by next week. Buy with confidence!

GaleForce 09-01-2014 05:30 PM
Quote:
Originally Posted by martin82 (Post 2949285)
Sorry to derail doesn't anyone have any pics on how they routed the wires for innovate lc1/lc2? Wanting to know easiest way to route the sensor wiring
Through the firewall or down the dash?

For through the firewall I entered an empty grommet on the left side near the clutch pedal. For going from the a-pillar down the side of the dash i recommend pulling the door rubber and routing wire there.

http://i1283.photobucket.com/albums/...ps3c488ddc.jpg

Hotrodz 09-01-2014 06:53 PM
That worked for my install!

martin82 09-01-2014 07:19 PM
Wanted to know either from door to firewall but down to hfc what's the easiest to go through

ROBERT1183 09-08-2014 05:28 PM
Please pm price shipped to 07866. Looking to buy asap.

GaleForce 09-08-2014 08:01 PM
Quote:
Originally Posted by ROBERT1183 (Post 2957640)
Please pm price shipped to 07866. Looking to buy asap.
Done :tiphat:

asdf2810 09-09-2014 12:56 AM
Can you PM price for a single with CF shipped to Thailand? Thanks.

Cell 09-09-2014 05:06 AM
Quote:
Originally Posted by Nixlimited (Post 2920286)
This is very cool, but I have to say, I have had a bunch of issues with my MTX-L. And based on talking to other people with them, I'm not alone. I used to have one of Innovate's analog gauges and it was a trooper for years, but my current gauge hasn't made it 500 miles without issues. Not sure I would trust them with my boost control at this point.



Quote:
Originally Posted by GaleForce (Post 2920215)
Price of the double gauge pod? The top and bottom pod seems to be aligned differently or maybe it is just the angle?
Also how is the visibility of the double gauge pod installed?

Sent from my Nexus 5 using Tapatalk 4

GaleForce 09-09-2014 06:15 PM
Quote:
Originally Posted by Cell (Post 2958108)
Price of the double gauge pod? The top and bottom pod seems to be aligned differently or maybe it is just the angle?
Also how is the visibility of the double gauge pod installed?

Sent from my Nexus 5 using Tapatalk 4
Here is photos a fellow forum member sent me of his Premium dual gauge a-pillar pod installed.

https://scontent-b-iad.xx.fbcdn.net/...47&oe=54937605

This one looks a little "off" because he used the panoramic feature to capture the image.

https://fbcdn-sphotos-h-a.akamaihd.n...faeecb44d61cb9

This is from a test fitting before I sent it out to a forum member.

https://fbcdn-sphotos-h-a.akamaihd.n...35b96a2a8c8565

Hotrodz 09-11-2014 08:52 PM
Got Mine
 
1 Attachment(s)
Thanks Mr. Gale for a great product....

GaleForce 09-12-2014 04:29 AM
Quote:
Originally Posted by Hotrodz (Post 2962167)
Thanks Mr. Gale for a great product....
Looks good. Thanks for the pic!

niko86 09-16-2014 01:18 AM
Thanks Gale, looks super nice!
Did you model it after AEM gauges? my AEM failsafe fits like a glove, with the silver nissan becel it looks like the Z came this way

http://s25.postimg.org/ynceno5i7/IMG...915_212335.jpg
http://s25.postimg.org/ry5v7nk67/IMG...915_213525.jpg

GaleForce 09-16-2014 03:59 AM
Good job Niko!

niteman20 09-20-2014 01:37 PM
Price for a single please to 60647

clkio 09-20-2014 03:13 PM
very nice work, price for double shipped to Ontario N1P1J4 plz?

GaleForce 09-20-2014 04:10 PM
Done

Kaiser370z 09-21-2014 03:31 PM
Please PM me the price of the single shipped to Saudi Arabia

GaleForce 09-21-2014 04:58 PM
Done

puckshaw 10-09-2014 12:27 PM
Price for single and double shipped to 28027 please :tup:

TerribleONE 10-09-2014 12:32 PM
I need this in my life... Hope your doing well Mr. Gale

GaleForce 10-09-2014 05:28 PM
Quote:
Originally Posted by puckshaw (Post 2994918)
Price for single and double shipped to 28027 please :tup:
Done :tiphat:

Quote:
Originally Posted by TerribleONE (Post 2994922)
I need this in my life... Hope your doing well Mr. Gale
Living the dream, buddy. Living the dream.

jwick 10-09-2014 05:29 PM
Quote:
Originally Posted by TerribleONE (Post 2994922)
I need this in my life... Hope your doing well Mr. Gale
Yes...yes you do

brutusvk 10-13-2014 04:02 PM
Still making these? If so, I sent you a PM. Checking prices on both a single and a double. (Not sure which one I need yet). Shipped to 85308. Thanks!

GaleForce 10-13-2014 05:33 PM
Quote:
Originally Posted by brutusvk (Post 2998583)
Still making these? If so, I sent you a PM. Checking prices on both a single and a double. (Not sure which one I need yet). Shipped to 85308. Thanks!
Done :tiphat:

brutusvk 10-13-2014 09:49 PM
I appreciate all the help. I look forward to receiving it. I guess I am committed to a forced induction now. :D (Stillen supercharger)

tvickerman 10-16-2014 02:25 PM
very nice work, price for single shipped to Ontario M5V 3Y4 plz?

GaleForce 10-16-2014 08:19 PM
Quote:
Originally Posted by tvickerman (Post 3002769)
very nice work, price for single shipped to Ontario M5V 3Y4 plz?
Done :tiphat:

EZT 10-19-2014 12:51 AM
Price for double shipped to 32607?

aalqaedi 10-19-2014 01:32 AM
Can you PM me a price for both a single and a double no carbon to 11413

GaleForce 10-20-2014 10:35 PM
Quote:
Originally Posted by aalqaedi (Post 3004898)
Can you PM me a price for both a single and a double no carbon to 11413
Done :tiphat:

Danas 10-22-2014 01:31 PM
Hi. Can you please PM me a price for single and dual non carbon pillar? Ships to CO80909. Thanks. BTW great job!:tiphat:

EliteXpress 10-23-2014 04:10 PM
Please PM me a price for both a single and a double no carbon. Thanks!

GaleForce 10-23-2014 07:20 PM
Quote:
Originally Posted by Danas (Post 3008658)
Hi. Can you please PM me a price for single and dual non carbon pillar? Ships to CO80909. Thanks. BTW great job!:tiphat:
Quote:
Originally Posted by EliteXpress (Post 3010502)
Please PM me a price for both a single and a double no carbon. Thanks!
Done :tiphat:

nguy3nt0mmy21 11-01-2014 01:11 PM
Pm'ad let me know asap!!! :tup:

GaleForce 11-01-2014 07:38 PM
Quote:
Originally Posted by nguy3nt0mmy21 (Post 3018892)
Pm'ad let me know asap!!! :tup:
Done :tiphat:

tommyguns 11-14-2014 02:15 PM
Price for a double shipped to 10532. include for a single also please. One other thing can you have it by Christmas. Thanks :tiphat:

xxAGAVExx 11-15-2014 06:52 PM
Custom A-Pillar gauge pod - lots of pictures
 
Single and double shipped to 33596, not sure which one I'll get yet :)


Sent from my iPhone using Tapatalk

GaleForce 11-15-2014 07:16 PM
Quote:
Originally Posted by tommyguns (Post 3031371)
Price for a double shipped to 10532. include for a single also please. One other thing can you have it by Christmas. Thanks :tiphat:
Quote:
Originally Posted by xxAGAVExx (Post 3032078)
Single and double shipped to 33596, not sure which one I'll get yet :)


Sent from my iPhone using Tapatalk
Done and done :tiphat:

Le007 11-20-2014 03:10 AM
Brother Gale, I see some fine work on display here. As my very first comment on this awesome website - honor goes to your hard work! Now to business :) Double pillar with silver rings for 52mm gauges, shipped to 02135. Thanks!

GaleForce 11-20-2014 06:39 AM
Quote:
Originally Posted by Le007 (Post 3035336)
Brother Gale, I see some fine work on display here. As my very first comment on this awesome website - honor goes to your hard work! Now to business :) Double pillar with silver rings for 52mm gauges, shipped to 02135. Thanks!
Thank you for the kind words. Message sent. :tiphat:


All times are GMT -5. The time now is 08:07 AM.
Page 8 of 16 « First 67 8 910 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2