Chris Forsberg Racing wide rear fenders: Anyone try these?

CDepp · 12-27-2012, 11:06 AM

Quote:

Originally Posted by topics ii

hello everyone,

these fenders were made not to be a "widebody" application. They are to be a lightweight/replaceable option on racing applications. As you can see below we remove all the crushable metal and replace it with the composite fender. You can remove more material but we are limited by the "rear most suspension point" (rear subframe mount) and no higher than our front side window trim in the formula drift rules.

We felt that the rear track width was already very wide vs the front track width and the wheelbase. Which is why they are not 20, 30, 50mm fenders. They are available in fiberglass and wet or dry carbon fiber. Thanks for the interest!

This was exactly where I thought the application was meant. Quick swap of fenders for race. I love the fact that in the last pic, 2 Z's are sitting there. Not just 2 Z's, but 2 monster Z's.

Thank you for the information and response to my message. Your team does magical stuff on the track. Keep it up!

Topics II · 12-28-2012, 08:08 AM

Quote:

Originally Posted by VDC_OFF

Just curious, are you with MA Motorsports?

Yes, MA Motorsports is my full time crew for our drifting effort.

VDC_OFF · 12-28-2012, 09:48 AM

Quote:

Originally Posted by Topics II

Yes, MA Motorsports is my full time crew for our drifting effort.

Cool I just emailed yall about the custom LCA's for more steering angle. Interested in getting some!

Mr&Mrs · 12-28-2012, 04:37 PM

Oh I see now! Very nice option, thanks for the response MA.

Shamu · 01-11-2013, 09:10 PM

Didn't see this. I need 2 inches of clearance over stock fenders for my new 12.5 wide wheels with 335 width race tires. Anything you have give that kind of Clarence?

VDC_OFF · 01-14-2013, 08:50 AM

Quote:

Originally Posted by Shamu

Didn't see this. I need 2 inches of clearance over stock fenders for my new 12.5 wide wheels with 335 width race tires. Anything you have give that kind of Clarence?

Might want to look into Veilside or Tamon.

Kingbaby · 01-14-2013, 09:00 AM

Quote:

Originally Posted by Topics II

Hello everyone,

These fenders were made not to be a "widebody" application. They are to be a lightweight/replaceable option on racing applications. As you can see below we remove all the crushable metal and replace it with the composite fender. You can remove more material but we are limited by the "rear most suspension point" (rear subframe mount) and no higher than our front side window trim in the Formula Drift rules.

We felt that the rear track width was already very wide vs the front track width and the wheelbase. Which is why they are not 20, 30, 50mm fenders. They are available in fiberglass and wet or dry carbon fiber. Thanks for the interest!

Legit!

I'm beating a dead horse but the 370Z is setup to take 305s with ease! Those wanting more than 10mm have to be running 13 or wider wheels other wise pointless.

VDC_OFF · 01-14-2013, 09:26 AM

Quote:

Originally Posted by Kingbaby

Legit!

I'm beating a dead horse but the 370Z is setup to take 305s with ease! Those wanting more than 10mm have to be running 13 or wider wheels other wise pointless.

all depends on the offset. If hes running negatives for hellaflush reasons he will need something bigger.

dirTy_shoeZ · 05-09-2013, 01:30 PM

these are an awesome upgrade.

roplusbee · 05-09-2013, 09:22 PM

Quote:

Originally Posted by VDC_OFF

all depends on the offset. If hes running negatives for hellaflush reasons he will need something bigger.

Not to derail here, but why would someone go for hellaflush or whatever they call the ridiculous camber'd and stretched tire on a wheel look for? Sponsorship??? It just doesn't work for me.

Now those fenders would be awesome if I were a track junkie and needed quick and easy access to a good deal of the rear section of the car.

12-28-2012, 04:37 PM	#19 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,192 Drives: RZ34 Rep Power: 15161	Oh I see now! Very nice option, thanks for the response MA. __________________ Project Z <--Click - Check out the link too many mods to list!

01-11-2013, 09:10 PM	#20 (permalink)
Shamu A True Z Fanatic Join Date: Jan 2011 Location: Nor Cal Posts: 1,059 Drives: 370Z Racecar Rep Power: 19	Didn't see this. I need 2 inches of clearance over stock fenders for my new 12.5 wide wheels with 335 width race tires. Anything you have give that kind of Clarence? __________________ Grant

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SEIBON WIDE BODY KIT NOW AVAILABLE @ ViViD Racing!!!	vividracing	Body Interior/Exterior	71	02-13-2015 09:31 AM
Wide Body stock looking FENDERS... (custom only??)	binary0x01	Exterior & Interior	15	10-16-2012 01:13 PM
CS Add on spoiler, UAM Fenders, UAM Amuse rear	sinceday1	Exterior & Interior	12	11-26-2011 10:07 AM
Pulling Rear Fenders	Stanced370Z	Wheels & Tires	36	03-09-2011 07:39 AM
Rear Fenders	tmjohansen	Exterior & Interior	2	07-08-2010 03:10 AM

05-09-2013, 01:30 PM	#24 (permalink)
dirTy_shoeZ Track Member Join Date: Jul 2010 Location: san antonio, tx Posts: 779 Drives: 40th ANN TT Rep Power: 15	these are an awesome upgrade.