changing bulbs on headlights/taillights?

JAYNO20 · 04-16-2012, 03:13 PM

Anyone know about the tail lights?

elliotty · 04-16-2012, 03:23 PM

For the tail lights, you need to remove the housing assembly to access the bulbs. There are two screws and a nut (if I remember correctly) holding the tail light housing in. To get to the nut (located on the backside of the tail light assembly) you have to remove the plastic trim panels in the trunk. It is not very difficult, but is a little time consuming.

Hope this helps!

USMCASA · 04-16-2012, 04:34 PM

Quote:

Originally Posted by JAYNO20

Anyone know about the tail lights?

you'll have to remove quite a bit of the interior panels in the rear hatch area to get at the nuts holding the housings in. make sure your bulbs seal all the way up or you will get a little bit of moisture in them.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
about changing hid bulbs..	kk370	Nissan 370Z General Discussions	5	01-08-2012 12:35 AM
WTT: my PG painted headlights for your stock headlights	Cjanik	Parts for sale (Private Classifieds)	15	10-27-2010 02:28 PM
JDM taillights?	hitbyadampayi	Exterior & Interior	2	07-04-2010 03:28 AM
Stock HID bulbs vs. 6000k bulbs	Posey075	Exterior & Interior	2	06-20-2010 05:58 PM
BAD taillights....	simota1	Exterior & Interior	17	08-01-2009 12:32 PM

04-16-2012, 03:13 PM	#1 (permalink)
JAYNO20 Track Member Join Date: Mar 2012 Location: Pittsburgh, PA Posts: 802 Drives: 2010 370Z Nismo Rep Power: 15	Anyone know about the tail lights?

04-16-2012, 03:23 PM	#2 (permalink)
elliotty Enthusiast Member Join Date: Sep 2010 Location: Charlotte, NC Posts: 355 Drives: '10 PG Nismo TT Rep Power: 15	For the tail lights, you need to remove the housing assembly to access the bulbs. There are two screws and a nut (if I remember correctly) holding the tail light housing in. To get to the nut (located on the backside of the tail light assembly) you have to remove the plastic trim panels in the trunk. It is not very difficult, but is a little time consuming. Hope this helps!