Evo-r handle covers.. Yes or no.

captain-nok · 04-05-2012, 06:57 PM

Quote:

Originally Posted by simota1

zstore or contact jay at evor

Thanks

simota1 · 04-05-2012, 04:58 AM

hey ex!!! hows thee smurf my good man?

2theextreme · 04-05-2012, 05:05 AM

Quote:

Originally Posted by simota1

hey ex!!! hows thee smurf my good man?

Hanging in there....getting ready for the car show season.

So, I have a CF hood and CF Mine's rear wing add-on with blacked out handles. Do I dare take the chance and get the CF handles or could that be too much?

simota1 · 04-05-2012, 05:10 AM

Quote:

Originally Posted by 2theextreme

Hanging in there....getting ready for the car show season.

So, I have a CF hood and CF Mine's rear wing add-on with blacked out handles. Do I dare take the chance and get the CF handles or could that be too much?

i say if your handles right now are silver DO IT!!!! if they are color matched..never mind

2theextreme · 04-05-2012, 05:16 AM

Quote:

Originally Posted by simota1

i say if your handles right now are silver DO IT!!!! if they are color matched..never mind

Yeah, they are painted black to match the TE-37's but little bits of silver are starting to show from rock chips or maybe just due to having gotten it painted over 1 1/2 years ago.

simota1 · 04-05-2012, 07:54 AM

do it then bro!!!!! cf it already!!!

Ages · 04-05-2012, 09:19 AM

Thanks for the input guys. I just ordered my cf handles. I will post pics when I get them.

Ages · 04-11-2012, 07:33 PM

ImageUploadedByTapatalk1334190610.179629.jpgHey what's up guys. So I got my handle covers delivered today and I decided to drill a key hole in it. Well the resin cracked... I started with a small pilot hole but still happened . So now I gotta repair it. The question is, does anyone here know what kind of resin I can use for this. Needs to be clear. There are tons of choices out there. Just hoping someone here would know. If you look at the pic you can see where the resin is delaminating from the carbon cloth. I know I gotta chip that away first then apply resin. Thoughts ? Thanks in advance.

simota1 · 04-11-2012, 08:47 PM

pm cfe tony is the man for that job... did you drill it from the back or from the front?

Ages · 04-12-2012, 12:32 AM

i made the pilot hole from behind then opened it up from the front. when the small bit popped though if pulled the resin away from the CF.

simota1 · 04-14-2012, 02:41 PM

Quote:

Originally Posted by Ages

i made the pilot hole from behind then opened it up from the front. when the small bit popped though if pulled the resin away from the CF.

maybe try contacting tony from cfe?

^^^^ yes those are the evor look at the right handle bottom corner it says evor

FireDan50 · 04-14-2012, 11:58 AM

Just thought I'd share some pics of this product and my review. Awesome fit and finish. They went on with no problems or modifications, but I did add a little more 3M adhesive tape to make them more secure.

bjblackout · 04-17-2012, 02:21 PM

Quote:

Originally Posted by FireDan50

Just thought I'd share some pics of this product and my review. Awesome fit and finish. They went on with no problems or modifications, but I did add a little more 3M adhesive tape to make them more secure.

Look Great!! Mine are on order!!

captain-nok · 04-14-2012, 02:36 PM

are those the evo-r?

Ages · 04-14-2012, 03:58 PM

I bought some resin at a marine shop. I put one coat over it looks pretty good. That was last night. Gonna sand it tonight and apply a second coat. On Monday I will sand it again and put 2 coats of BASF clear coat on them. I'll be all set after that. I want to add that you do not NEED to make a hole for the key but I like to think ahead. In case the battery dies.

04-05-2012, 04:58 AM	#2 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	hey ex!!! hows thee smurf my good man? __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

04-05-2012, 07:54 AM	#6 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	do it then bro!!!!! cf it already!!! __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

04-05-2012, 09:19 AM	#7 (permalink)
Ages Base Member Join Date: Oct 2011 Location: MA Posts: 184 Drives: 11 370Z SP MT Gunmet Rep Power: 15	Thanks for the input guys. I just ordered my cf handles. I will post pics when I get them. __________________ F.I.CBE\|F.I.HFC\|20/25mm Z1 Spacers\|CS TypeN Wing(cf)\|CS Diffuser (cf)\|EvoR Fangs(cf)\|EvoR Type2 Front Lip\|Evor Side Blades\|Stillen Gen3\|JDM Fog\|

04-11-2012, 07:33 PM	#8 (permalink)
Ages Base Member Join Date: Oct 2011 Location: MA Posts: 184 Drives: 11 370Z SP MT Gunmet Rep Power: 15	ImageUploadedByTapatalk1334190610.179629.jpgHey what's up guys. So I got my handle covers delivered today and I decided to drill a key hole in it. Well the resin cracked... I started with a small pilot hole but still happened . So now I gotta repair it. The question is, does anyone here know what kind of resin I can use for this. Needs to be clear. There are tons of choices out there. Just hoping someone here would know. If you look at the pic you can see where the resin is delaminating from the carbon cloth. I know I gotta chip that away first then apply resin. Thoughts ? Thanks in advance. __________________ F.I.CBE\|F.I.HFC\|20/25mm Z1 Spacers\|CS TypeN Wing(cf)\|CS Diffuser (cf)\|EvoR Fangs(cf)\|EvoR Type2 Front Lip\|Evor Side Blades\|Stillen Gen3\|JDM Fog\|

04-11-2012, 08:47 PM	#9 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	pm cfe tony is the man for that job... did you drill it from the back or from the front? __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

04-12-2012, 12:32 AM	#10 (permalink)
Ages Base Member Join Date: Oct 2011 Location: MA Posts: 184 Drives: 11 370Z SP MT Gunmet Rep Power: 15	i made the pilot hole from behind then opened it up from the front. when the small bit popped though if pulled the resin away from the CF. __________________ F.I.CBE\|F.I.HFC\|20/25mm Z1 Spacers\|CS TypeN Wing(cf)\|CS Diffuser (cf)\|EvoR Fangs(cf)\|EvoR Type2 Front Lip\|Evor Side Blades\|Stillen Gen3\|JDM Fog\| Last edited by Ages; 04-12-2012 at 12:34 AM.

04-14-2012, 11:58 AM	#12 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 21	Just thought I'd share some pics of this product and my review. Awesome fit and finish. They went on with no problems or modifications, but I did add a little more 3M adhesive tape to make them more secure.

04-14-2012, 02:36 PM	#14 (permalink)
captain-nok Base Member Join Date: Feb 2012 Location: Oxnard, California Posts: 161 Drives: 2008 Evo X Rep Power: 15	are those the evo-r? __________________

04-14-2012, 03:58 PM	#15 (permalink)
Ages Base Member Join Date: Oct 2011 Location: MA Posts: 184 Drives: 11 370Z SP MT Gunmet Rep Power: 15	I bought some resin at a marine shop. I put one coat over it looks pretty good. That was last night. Gonna sand it tonight and apply a second coat. On Monday I will sand it again and put 2 coats of BASF clear coat on them. I'll be all set after that. I want to add that you do not NEED to make a hole for the key but I like to think ahead. In case the battery dies. __________________ F.I.CBE\|F.I.HFC\|20/25mm Z1 Spacers\|CS TypeN Wing(cf)\|CS Diffuser (cf)\|EvoR Fangs(cf)\|EvoR Type2 Front Lip\|Evor Side Blades\|Stillen Gen3\|JDM Fog\| Last edited by Ages; 04-14-2012 at 07:04 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Door Handle	theboydiddy	Exterior & Interior	5	03-20-2012 09:04 AM
[WTB] Custom headlights and cf door handle covers	Dwv2005	Parts for sale (Private Classifieds)	0	03-09-2012 09:08 PM
Can it handle it??	UltraIron1	Forced Induction	82	06-18-2011 01:25 AM
handle noise??	shl468	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	0	06-02-2010 10:45 PM
Help with handle scratches	boomboom	Exterior & Interior	2	05-04-2010 11:34 PM