Well my car won't start, key reader warning is on...

SPOHN · 02-23-2012, 01:55 PM

Id like to find out if you can bypass this unit? Requardless of a bad bunch one day all these units will fail.

onzedge · 02-23-2012, 02:00 PM

Quote:

Originally Posted by SPOHN

Id like to find out if you can bypass this unit? Requardless of a bad bunch one day all these units will fail.

I do not think this is possible.

Nick911sc · 02-23-2012, 02:21 PM

I noticed in the DIY thread someone took apart the unit and was able to fix it. So if that's the case... Is it possible to take the unit apart and modify it to always be in the open position? Taking away the possibility for failure... Not sure if that would require alteration to electronics as well

SPOHN · 02-23-2012, 02:48 PM

Quote:

Originally Posted by Nick911sc

I noticed in the DIY thread someone took apart the unit and was able to fix it. So if that's the case... Is it possible to take the unit apart and modify it to always be in the open position? Taking away the possibility for failure... Not sure if that would require alteration to electronics as well

I'm not sure but I believe these things operate in a open closed format. When car is off it closes and when you start it opens. But if it doesn't open it won't start

02-23-2012, 01:55 PM	#1 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 47 Posts: 14,844 Drives: Waiting on next Z Rep Power: 223	Id like to find out if you can bypass this unit? Requardless of a bad bunch one day all these units will fail. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OBD reader problem	jpit	Nissan 370Z General Discussions	16	08-22-2012 09:14 AM
cold start/push start	chops	Nissan 370Z General Discussions	21	02-14-2011 03:40 AM
FS: Sony PRS-900BC E-book Reader BNIB	toxik	Misc Items for sale (No Z stuff)	1	10-05-2010 10:34 AM
first time poster, long time reader	gvd	Introduction	5	06-30-2010 02:14 PM
How about this code reader?	Red370	Nissan 370Z General Discussions	16	01-05-2010 04:45 PM

02-23-2012, 02:21 PM	#3 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 22	I noticed in the DIY thread someone took apart the unit and was able to fix it. So if that's the case... Is it possible to take the unit apart and modify it to always be in the open position? Taking away the possibility for failure... Not sure if that would require alteration to electronics as well