Need to remove complete dome light assembly

SiRay6

Hi,

I know how to remove the dome light covers to install LED's.

What I'm asking is, does anyone know how to remove the complete light assembly so I can access wires behind above it?

I purchased a Gentex Homelink mirror and I have suspicions that I can tap into constant, ACC power, and ground from the Dome light harness.

I have seen the DIY for the home link mirror install, but I wanted to try and get power from dome lights instead so I don't have to run wires all the way down to driver's side footwell/fuse box. I don't have a problem wiring it that way, but I wanted to keep the wires short and sweet if possible.

I know constant and ground is up there...But I noticed there is a small red led light up there also that is only on with ACC/IGN so I wanted to tap into that wire for ACC12v+

Thanks in advance!

-Ray