How would this look? Opinions?

pty370z · 08-25-2011, 11:41 AM

Hey guys.. I'm attaching a picture of my car to give you an idea of what I'm attempting..

I already installed EVO-R CF side blades and I'm looking into getting the INGS CF front lip (pictured below on a different car for reference)

My only issue is the rear.. At first I wanted to simply get the CF rear splash guards offered by theZstore.com but I think they won't do the job. In the end, rear would look "higher" off the ground than sides and front.

So I thought about the rear spats add-ons I've seen around and asked for a photoshop (thanks to forum member kuriz32) that is also below. Used a previous picture of docaam's car for the photoshop as well so indirect thanks to you too!

I'd buy CF rear spats and match-paint the top half to my car to leave the CF accent on the bottom.

I appreciate your comments!

This is my Z!

This is the INGS+1 CF Front Lip

This is how the rear spats would look like (sort of)

tjlazer · 08-25-2011, 12:06 PM

Yeah I think it wouild look good. Powdercoat the wheels black and get some 20mm spacers and you will be set.

pty370z · 08-25-2011, 12:33 PM

Quote:

Originally Posted by tjlazer

Yeah I think it would look good. Powdercoat the wheels black and get some 20mm spacers and you will be set.

Thanks!

About the wheels, I'm waiting for a set of custom-painted TE37SL's in matte black.. They should get here around mid/end-October..

kenchan · 08-25-2011, 03:55 PM

yep, if im ever doing the ings+ side pieces i was thinking about doing something very similar for the rear.

GL with your project!

azn370z · 08-25-2011, 04:38 PM

I think the rear of the z should be higher than the side. The front lip should be same height or lower than the sideskirt. Whatever you do don't mix 3 different bodykits. That's just my opinion. Keep it clean.

KamiSpeed · 08-25-2011, 05:37 PM

I think the front and side will flow well, not sure about the rear... good luck though, post pictures when you have it

08-25-2011, 11:41 AM	#1 (permalink)
pty370z Track Member Join Date: Apr 2009 Location: Panama City, Panama Posts: 654 Drives: over the speed limit Rep Power: 17	How would this look? Opinions? Hey guys.. I'm attaching a picture of my car to give you an idea of what I'm attempting.. I already installed EVO-R CF side blades and I'm looking into getting the INGS CF front lip (pictured below on a different car for reference) My only issue is the rear.. At first I wanted to simply get the CF rear splash guards offered by theZstore.com but I think they won't do the job. In the end, rear would look "higher" off the ground than sides and front. So I thought about the rear spats add-ons I've seen around and asked for a photoshop (thanks to forum member kuriz32) that is also below. Used a previous picture of docaam's car for the photoshop as well so indirect thanks to you too! I'd buy CF rear spats and match-paint the top half to my car to leave the CF accent on the bottom. I appreciate your comments! This is my Z! This is the INGS+1 CF Front Lip This is how the rear spats would look like (sort of) __________________ 2010 Solid Red 370Z * *Touring-Sport-6MT Black Interior Performance:** STILLEN * BERK * UR * MISHIMOTO * K&N * Z1 * ZSPEED * UPREV * DBA Interior: GT-R Red Start/Stop Button * MSA Floor Mats * PW:JDM Exterior: INGS+1 * SEIBON * FUJIMURA * PW:JDM * UAM * KICS * VOLK

08-25-2011, 12:06 PM	#2 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Yeah I think it wouild look good. Powdercoat the wheels black and get some 20mm spacers and you will be set. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

08-25-2011, 04:38 PM	#5 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 489	I think the rear of the z should be higher than the side. The front lip should be same height or lower than the sideskirt. Whatever you do don't mix 3 different bodykits. That's just my opinion. Keep it clean. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

08-25-2011, 05:37 PM	#6 (permalink)
KamiSpeed A True Z Fanatic Join Date: Feb 2011 Location: Orlando, FL Posts: 5,888 Drives: 09 370z Rep Power: 25	I think the front and side will flow well, not sure about the rear... good luck though, post pictures when you have it __________________ KAMISPEED \| SHOP 370Z PERFORMANCE PARTS & MODS \| SUPPORT@KAMISPEED.COM KAMI SPEED REVIEWS \| FINANCE YOUR PARTS WITH US \| MILITARY & FIRST RESPONDERS PRE-ORDER DEPOSIT PROGRAM \| HKS MASTER SELLER

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need opinions..	Corvac	Nissan 370Z Roadster (Convertible)	0	06-13-2011 09:07 PM
Opinions	MM36X	Wheels & Tires	12	02-05-2011 01:53 PM
Need opinions..	ducky	Exterior & Interior	8	06-17-2010 03:47 PM
What Would You Do? Need Opinions Please	Autumn	Nissan 370Z Pricing / Ordering Discussions	7	08-08-2009 06:56 PM
Need opinions	TARDCORE	Wheels & Tires	10	07-20-2009 02:59 PM

08-25-2011, 03:55 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yep, if im ever doing the ings+ side pieces i was thinking about doing something very similar for the rear. GL with your project!