broken;;

felix0121 · 07-20-2015, 09:36 AM

it moves up and down. .. -_-;;

kenchan · 07-20-2015, 10:06 AM

u talking about the b-pillar?

id take it off completely (or just pull it back if you can) and use VHB tape to remount.

JARblue · 07-20-2015, 10:09 AM

It's just stuck on there with tape. Should be easy to remove the pillar, replace the tape, and reinstall

kenchan · 07-20-2015, 10:13 AM

of course another option is to use duct tape..

JARblue · 07-20-2015, 10:16 AM

Quote:

Originally Posted by kenchan

of course another option is to use duct tape..

During my detail this weekend, I noticed I need to polish my b-pillars. Instead, I think I will just cover them with some black duct tape I have

TerribleONE · 07-20-2015, 10:18 AM

Quote:

Originally Posted by JARblue

It's just stuck on there with tape. Should be easy to remove the pillar, replace the tape, and reinstall

Did this change in the later year cars? Mine is attached with clips. Had to buy a new one from Nissan when my drivers side one broke.

kenchan · 07-20-2015, 10:26 AM

Quote:

Originally Posted by JARblue

During my detail this weekend, I noticed I need to polish my b-pillars. Instead, I think I will just cover them with some black duct tape I have

i used high tech duct tape aka DiNoc on mine

Quote:

Originally Posted by TerribleONE

Did this change in the later year cars? Mine is attached with clips. Had to buy a new one from Nissan when my drivers side one broke.

mine is a 09 and held on by clips. but VHB will do fine.

JARblue · 07-20-2015, 10:28 AM

Quote:

Originally Posted by TerribleONE

Did this change in the later year cars? Mine is attached with clips. Had to buy a new one from Nissan when my drivers side one broke.

There should be two clips and a pawl. I never had any issues with removal, though. Mine just pull right off.

felix0121 · 07-20-2015, 10:33 AM

I cannot take it off completely ;;

kenchan · 07-20-2015, 11:01 AM

dats np, just pull up as far as you can, use VHB tape and call it a day.

felix0121 · 07-20-2015, 11:31 AM

Quote:

Originally Posted by kenchan

dats np, just pull up as far as you can, use VHB tape and call it a day.

cannot pull it up. it is stuck to the side.

kenchan · 07-20-2015, 11:51 AM

humm... i would take an interior panel removal tool and gently pry it off in this case.

Something like this:
http://www.amazon.com/Panel-Removal-...p+removal+tool

if you're worried, take it in.

Austonian · 07-20-2015, 01:00 PM

if you still have two good tabs just sneak a peice of mounting tape in at the top and leave it alone.

kenchan · 07-20-2015, 03:51 PM

how about squeezing in silicon adhesive?

felix0121 · 07-21-2015, 02:26 PM

Quote:

Originally Posted by kenchan

how about squeezing in silicon adhesive?

got a fix at the dealership today.

$90 around charged ..

07-20-2015, 09:36 AM	#1 (permalink)
felix0121 Enthusiast Member Join Date: May 2012 Location: / Posts: 476 Drives: / Rep Power: 69	broken;; it moves up and down. .. -_-;;

07-20-2015, 10:09 AM	#3 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 45 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684442	It's just stuck on there with tape. Should be easy to remove the pillar, replace the tape, and reinstall kenchan likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

07-20-2015, 10:13 AM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	of course another option is to use duct tape.. Mick_12Nismo likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FML, Broken again :(	Mike	Track / Autocross / Drifting / Dragstrip	32	05-24-2013 07:47 PM
My Z got broken in to :(	Effen5	Nissan 370Z General Discussions	61	05-25-2012 04:58 PM
Car broken into. @_@	definitionxmk	Hawaii	9	04-11-2011 05:20 PM
broken down zed	cyrus_b	Australia/New Zealand	10	05-19-2010 02:52 AM

07-20-2015, 10:06 AM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	u talking about the b-pillar? id take it off completely (or just pull it back if you can) and use VHB tape to remount.

07-20-2015, 10:33 AM	#9 (permalink)
felix0121 Enthusiast Member Join Date: May 2012 Location: / Posts: 476 Drives: / Rep Power: 69	I cannot take it off completely ;;

07-20-2015, 11:01 AM	#10 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	dats np, just pull up as far as you can, use VHB tape and call it a day.

07-20-2015, 11:51 AM	#12 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	humm... i would take an interior panel removal tool and gently pry it off in this case. Something like this: http://www.amazon.com/Panel-Removal-...p+removal+tool if you're worried, take it in.

07-20-2015, 01:00 PM	#13 (permalink)
Austonian Enthusiast Member Join Date: Mar 2013 Location: Texas Posts: 371 Drives: 40th Anniversary Rep Power: 29	if you still have two good tabs just sneak a peice of mounting tape in at the top and leave it alone.

07-20-2015, 03:51 PM	#14 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	how about squeezing in silicon adhesive?