This Plasti Dip product is Awesome!

Dallaz

Hey Guys PM zentropy. His handles are PLASTI-dipped and are holding up pretty well. The inside will start to peel after a while, but that should be obvious.

We just did our camaro's side emblems which are waaay more complex than the Nissan burgers yet it worked perfectly. Peeled off around the camaro in one piece! As for my handles, which I spray painted with Krylon fusion, my passenger button sticks but still works. The drivers side is perfect.

I think it's just a matter of how much build up is around the buttons when your done. And as for painting the entire area. I had the handle propped open using a small screw to get the area you don't see unless your pulling the handle to open it which worked perfectly.

The one thing I learned about this stuff is that it's not going to damage anything (paint) or you be unable to get it off if you dont want it on. We had to wipe off some overspray from the hood between a couple of the coats when it was windy and it just comes right off after hardening.

We did 4 coats 10-15 minutes apart even though it says wait an hour between them. Then we waited overnight to peel off the rectangle from the camaro just to be on the safe side. It says wait 4 hours per coat to dry completely but I think one hour would have been enough. There's no risk

Attached Images

	ImageUploadedByTapatalk1331163148.446615.jpg (51.0 KB, 49 views)
	ImageUploadedByTapatalk1331163180.189235.jpg (84.4 KB, 46 views)
	ImageUploadedByTapatalk1331163199.986856.jpg (54.0 KB, 59 views)
	ImageUploadedByTapatalk1331163240.127256.jpg (67.1 KB, 49 views)
	ImageUploadedByTapatalk1331163097.931065.jpg (57.4 KB, 38 views)
	ImageUploadedByTapatalk1331163124.057180.jpg (42.4 KB, 46 views)

__________________
AeroJacket Lip Kit | GTR switch | NISMO S-Knob | Blacked-Out-EVERYTHING| 5% Tint | Carbon Fangs/Upper Trim | VOSSEN CV3's | Painted Headlights | CF Diffuser