This Plasti Dip product is Awesome!

darionlear · 01-01-2012, 05:01 PM

Quote:

Originally Posted by scionide

^ how did you remove the extra spray on the sides of the rear diffuser? lightly cut with a razor blade or something?

A very steady hand and an exacto knife. I wouldn't let Michael J Fox do it for you. I did it eye level so the angle wasn't odd or hard for me to get. *I cheated using a lift* >=) but just score along the angle break in the diffuser and make sure you're lite on the blade. Going too deep will go into your paint. If you were in EP I'd offer to help.

Sent from my DROID RAZR using Tapatalk

bjblackout · 01-01-2012, 09:22 PM

Guys that did your wheels did you also do the inside of the wheel. In another words did you do the inside edge of the wheel (where wheel weights go)also or just the outside area you see when just looking at wheel straight on.

CC_370z · 01-01-2012, 10:35 PM

Quote:

Originally Posted by bjblackout

Guys that did your wheels did you also do the inside of the wheel. In another words did you do the inside edge of the wheel (where wheel weights go)also or just the outside area you see when just looking at wheel straight on.

Would like to know this also.

TonyBPD · 01-02-2012, 05:31 PM

Quote:

Originally Posted by bjblackout

Guys that did your wheels did you also do the inside of the wheel. In another words did you do the inside edge of the wheel (where wheel weights go)also or just the outside area you see when just looking at wheel straight on.

I did both sides on mine.

bjblackout · 01-02-2012, 07:36 PM

Quote:

Originally Posted by TonyBPD

I did both sides on mine.

Pics of anyone that did the whole wheel including the inside??

TongMan · 01-18-2012, 03:54 PM

Quote:

Originally Posted by bjblackout

Guys that did your wheels did you also do the inside of the wheel. In another words did you do the inside edge of the wheel (where wheel weights go)also or just the outside area you see when just looking at wheel straight on.

I did not spray the inner wheel. No need to unless you want to cover every surface area of the wheel. Plus, it's less work to peel it back off when you don't want the plasti dip anymore. Check my pictures on the first post.

scionide · 01-01-2012, 10:37 PM

Quote:

Originally Posted by darionlear

A very steady hand and an exacto knife. I wouldn't let Michael J Fox do it for you. I did it eye level so the angle wasn't odd or hard for me to get. *I cheated using a lift* >=) but just score along the angle break in the diffuser and make sure you're lite on the blade. Going too deep will go into your paint. If you were in EP I'd offer to help.

Sent from my DROID RAZR using Tapatalk

ohh ok, thks for the tip

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plasti-dip'd front fangs and rear exhaust panel	NickTurnon	Exterior & Interior	22	08-30-2011 04:14 PM
Plasti-dipped A-Pillars	SeeyaBud86	Exterior & Interior	60	08-16-2011 02:43 PM
Plasti-Dippers!!	delusional	Nissan 370Z Photos / Spyshots / Video / Media Gallery	7	08-06-2011 08:25 AM
Plasti dipped the grille	Fezzik	Other Vehicles	16	05-02-2011 03:43 PM
Side trim is plasti dipped on the Red Vert	cereal2k	Other Vehicles	3	02-01-2011 10:11 PM

01-01-2012, 09:22 PM	#2 (permalink)
bjblackout Enthusiast Member Join Date: Nov 2011 Location: Maryland Posts: 373 Drives: 2009 Nissan 370Z Rep Power: 15	Guys that did your wheels did you also do the inside of the wheel. In another words did you do the inside edge of the wheel (where wheel weights go)also or just the outside area you see when just looking at wheel straight on.