08-02-2012, 10:07 PM
|
#1 (permalink)
|
|
A True Z Fanatic
Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141522
|
Quote:
Originally Posted by markymark
did you just hammer it where it sticks out? is it possible to fix it without taking out the seat?
|
i used an impact 21mm socket + adapter and a hammer to pound at the star washer, not the rod itself. there is one on each side of the seat. i saw my star washer go in (tighten) 0.7mm. the door side you can hammer in without seat removal, but the center console side you will have to unscrew the 4 screws mounting the seat to the floor.
Quote:
Originally Posted by gbrettin
I didn't see a TSB for the ECU whine. Kenchan, I remember you mentioning that there is one somewhere.
Found some info here. Go me.
Whine/Noise/High Pitch Arg! |
Quote:
Originally Posted by whoady4shoady
So if you have a clicking noise in your seat from it shifting, can i bring it in to the dealer to let them fix it? Is there a charge?
|
your dealer can fix it and for free if under warranty. print up the TSB that is located in the tsb section of the370z.com GL!
|
|
|
Similar Threads
Hybrid Mode
