Rear Fog Light LED Conversion

wstar

You will, give it some time. If nobody else comes up with an easy kit before I get around to it, I expect I'm going to DIY install it with a switch in the center console between the heated seat switches and post up how to do it. I already know what needs to be done, just need to get parts (switch esp) and get it done.

__________________
7AT Track Car!
Journal thread / Car setup details

AK370Z

Thanks.

I thought it was already available? European Rear Fog Lamp, 2009 370Z - The Z Store, your Datsun & Nissan Z & ZX source!

__________________
The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post
STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q.
Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section
My Monterey Blue Z ll My Exhaust --> My Intake --> G3
Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE
Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

wstar

Yeah the lamp/housing is available, but nothing for wiring the switch up front. I've already tracked down the wiring. If we plug the unit from your link into the existing connector that's hanging unused right by our dummy foglight, the other end of the +12V line comes out as the orange wire plugged into pin 24 of the BCM in the passenger footwell.

Just need to wire that and an ignition-switched +12V line to a physical switch in the center console. I think I'm going to get the dealer to order me a "replacement" heated seat switch to use for it (since it will fit the plastic perfectly), and then try to find a way to change the labeling on it.

The other alternative is someone could dealer-order a Canadian-spec set of wiper/headlight switches and replace that whole unit on the steering wheel, and the odds are high the stock foglight switch on that will just work (seeing as the BCM is wired for it). But it would cost more, and nobody knows if the BCM needs different software or settings via CONSULT or something to enable it.

__________________
7AT Track Car!
Journal thread / Car setup details