Rear Camera Install

leighspped

i like that placement of the backup cam

__________________
Performance: Fast Intentions LTH + CBX + Injen CAI + UpRev + KW3 + Whiteline sway bars + short throw shifter + 34r oil cooler = 335whp + (OS Giken Clutch and Diff)
Interior : Recaro seat + Alpine HU and Rockford Fosgate Amp and Speakers + Passport 9500ci + JDM shift knob + LED's Forged avant garde m310's 19x9 19x12 RE-11

AdobePhil

thanks. it's perfect, that piece just pops right out.

TreeSemdyZee

What camera do you have? Is the square that shows all camera or did you fabricate a mount?

AdobePhil

It's a Kenwood CCD-2000 camera with a fabricated mount.

It didn't look right showing all the camera, due to the odd shaped corners, so the portion of plastic that was cut out of that bezel piece from the Z, was painted matte black, and glued to the camera face, only exposing the lens of the camera. A permanent marker pen was then used on the cut out edges of the painted piece mounted to the camera.

it was then fastened to mounts installed on the back end.

It's solid, you could kick it and it's not moving.

TreeSemdyZee

Do you have any pictures of the backside of it? I've got the CMOS300 and don't really like where it's mounted right now.

AdobePhil

I don't have any on deck, but I can see if I can take some.