Nissan 370Z Forum
Page 13 of 17 « First 31112 13 1415 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   CarbonSignal Interior 11 piece Carbon fiber kit (http://www.the370z.com/exterior-interior/34543-carbonsignal-interior-11-piece-carbon-fiber-kit.html)

simota1 02-04-2012 05:39 PM
Quote:
Originally Posted by gurneyeagle (Post 1526125)
Onto the tach bezel. Okay, that was the tough one for me.

Getting the little screws out of the bezel with everyone's warning to "not drop the screws" in the back of my mind was tough. It's hard holding the dash cover up while trying to remove the screws by hand just as they are about to come out. Putting them back in was the same drama, but it just takes some patience. Job done.

Kudos to CarbonSignal. It took a little longer than expected to get the pieces, but blame that on the custom matte finish, the guys moving the shop, and the holidays. No big drama as none of these pieces impacted me driving the car.

I'd highly recommend these trim pieces. They are high quality, fit good and look great. :tup:

thats a good point man... i had to ask my wife to hold up the cover while i unscrewed it.... and having a magnetic tip screwdriver is your life saver.... :tup: to the fuel gauge overlay man im happy you got one :D

gurneyeagle 02-04-2012 06:11 PM
Quote:
Originally Posted by simota1 (Post 1526423)
thats a good point man... i had to ask my wife to hold up the cover while i unscrewed it.... and having a magnetic tip screwdriver is your life saver.... :tup: to the fuel gauge overlay man im happy you got one :D
LOL! The one thing that kept crossing my mind was that I needed three hands to do this.

simota1 02-04-2012 06:15 PM
Quote:
Originally Posted by gurneyeagle (Post 1526465)
LOL! The one thing that kept crossing my mind was that I needed three hands to do this.
:bowrofl:

kenhdcgov 02-05-2012 04:24 AM
Hey there,
Both of you, Gurneyeagle & Simota1, did an outstanding job! All that a bag of chips and
12 Snapples to go! It's amazing what all of us "Z Addicts" will do to get our next "fix" for
our "babies"! I am already planning for my next addition! What about you two? LOL
Take care & keep your Z's looking crisp!

simota1 02-05-2012 04:44 AM
Quote:
Originally Posted by kenhdcgov (Post 1527002)
Hey there,
Both of you, Gurneyeagle & Simota1, did an outstanding job! All that a bag of chips and
12 Snapples to go! It's amazing what all of us "Z Addicts" will do to get our next "fix" for
our "babies"! I am already planning for my next addition! What about you two? LOL
Take care & keep your Z's looking crisp!
when you say new addition do you mean another car? or the next mod.... i got a couple of mods left on my plate to do on my z... after those... im done...

if you meant a new car... yes i am planning on getting a maxima for a family car :tup: im not baller enough to get a 4 door G37 lol but i think the maxima ii will do... slam it and put volks :stirthepot: tastey haha

gurneyeagle 02-05-2012 07:26 AM
Quote:
Originally Posted by kenhdcgov (Post 1527002)
Hey there,
Both of you, Gurneyeagle & Simota1, did an outstanding job! All that a bag of chips and
12 Snapples to go! It's amazing what all of us "Z Addicts" will do to get our next "fix" for
our "babies"! I am already planning for my next addition! What about you two? LOL
Take care & keep your Z's looking crisp!
Quote:
Originally Posted by simota1 (Post 1527010)
when you say new addition do you mean another car? or the next mod.... i got a couple of mods left on my plate to do on my z... after those... im done...

if you meant a new car... yes i am planning on getting a maxima for a family car :tup: im not baller enough to get a 4 door G37 lol but i think the maxima ii will do... slam it and put volks :stirthepot: tastey haha
Thank you for the compliment Ken. Like simota1, I'm almost done too (for now :icon17:) I've got a carbon fiber ducktail on order, and then I'm going to sit back and just drive, clean, and polish.

Regards,

Mike

TerribleONE 02-17-2012 03:47 PM
Any updates...?

Th3 On3 02-19-2012 12:56 PM
What happen with the 11 peice? When will this be for sale?

KaienZ34 02-19-2012 01:48 PM
It is available, made to order just give them a pm and a few days to get back to you.

ZeeRedZ 02-20-2012 09:42 PM
Can't stand it any more and just ordered the Black CF 11-piece kit!!! Send them a PM and they got back to me with a few hours.

CarbonSignal 02-26-2012 01:05 AM
Thank you guys for the orders :) and glad you guys loving our products.

Pm me or A.J for any orders..

TerribleONE 03-19-2012 05:20 PM
AJ's PM box is full... I sent you a PM in regards to my order that I just received.. Please reply

Japanjay 03-19-2012 06:32 PM
Do you all have a website?

370ZilverZ 03-19-2012 06:36 PM
Carbon Fiber Element

A.J@CarbonSignal 03-20-2012 12:00 AM
Quote:
Originally Posted by TerribleONE (Post 1608699)
AJ's PM box is full... I sent you a PM in regards to my order that I just received.. Please reply
I lost my vendor status I think during renewal therefore my inbox is full...In meantime please get in touch with me on our email carbonsignal@hotmail.com

Quote:
Originally Posted by daemon1957 (Post 1608862)
Thats NOT our website but our fellow vendor :icon17::hello:

TerribleONE 03-28-2012 10:57 AM
anyone whos ordered from CS.. did you receive a bill from fedex after your package was delivered for "customs, duties, tax, other fees"?? in the fine print it states that "USUALLY, these are paid before the package was sent out" anyone share the same experience?

CarbonSignal 03-29-2012 02:28 AM
Quote:
Originally Posted by TerribleONE (Post 1625539)
anyone whos ordered from CS.. did you receive a bill from fedex after your package was delivered for "customs, duties, tax, other fees"?? in the fine print it states that "USUALLY, these are paid before the package was sent out" anyone share the same experience?
We pay our local customs/taxes before shipping items however we have no control in destination custom regulations. Its the same for all orders we ship...

kenhdcgov 03-29-2012 02:46 AM
Yep, I got the bill as well. Needless to say, I was surprised but I paid it. It wasn't a large amount so it was no big deal. But it was a "WTF" moment!

TerribleONE 03-29-2012 10:28 AM
Quote:
Originally Posted by CarbonSignal (Post 1627285)
We pay our local customs/taxes before shipping items however we have no control in destination custom regulations. Its the same for all orders we ship...
I highly recommend you start telling your customers this. I know its only $19 bucks but it just adds to the entire negative experience I have had so far.. not to mention already paying $75 dollars for shipping. So I am paying 100+ dollars to ship something that took me 3 months to get? :rolleyes:

GaleForce 03-29-2012 12:36 PM
You guys have it good. This is expected in Canada. BTW, shipping is a heck of a lot more than $75 to Canada too. And if something comes via UPS!!! Look out! UPS robs us blind. Having said that, the team at Carbon Signal did something to help lessen the UPS brokerage sting without me even asking them, (saving me hundreds of $$$'s). It was a huge relief, as a result I ordered from them again.

docaam 03-29-2012 12:52 PM
Quote:
Originally Posted by TerribleONE (Post 1627640)
I highly recommend you start telling your customers this. I know its only $19 bucks but it just adds to the entire negative experience I have had so far.. not to mention already paying $75 dollars for shipping. So I am paying 100+ dollars to ship something that took me 3 months to get? :rolleyes:
Im not sure maybe this is first time you ordered something which is imported by yourself in US. We people outside US here in Dubai pay 5% import custom on invoice (part price + chipping) on every single shipment and none of the vendors on forum and outside forum pay for us. I think import duties are customer's responsibility everytime.

Some vendors have lowered the invoice value on my request at times but for body parts its very risky, as if there is any damage in the shipment then courier insurance will cover that lowered value only.

TerribleONE 03-29-2012 12:53 PM
Quote:
Originally Posted by docaam (Post 1627999)
Im not sure maybe this is first time you ordered something which is imported by yourself in US. We people outside US here in Dubai pay 5% import custom on invoice (part price + chipping) on every single shipment and none of the vendors on forum and outside forum pay for us. I think import duties are customer's responsibility everytime.

Some vendors have lowered the invoice value on my request at times but for body parts its very risky, as if there is any damage in the shipment then courier insurance will cover that lowered value only.
It is not the first time ordering from outside the country. I think other times it was paid at the time of shipment. Oh well this is a very small problem and I dont mind paying it. Just wanted to hear other peoples experiences...

docaam 03-29-2012 01:10 PM
Quote:
Originally Posted by TerribleONE (Post 1628003)
It is not the first time ordering from outside the country. I think other times it was paid at the time of shipment. Oh well this is a very small problem and I dont mind paying it. Just wanted to hear other peoples experiences...
:tup: I ordered lots of parts regularly and none of the vendor never agreed to pay not they paid the import customs for me.

Robs370 03-30-2012 06:52 AM
Still Available?
 
Are these parts still available? If so how much is the whole set?

ShockWave 04-15-2012 07:24 PM
P.M. sent!!!

bjblackout 04-15-2012 08:28 PM
I am also interested in this set?? Still available?? How much?? How long till you get it once ordered??

DRFTSLT 04-16-2012 06:38 PM
Price to 98258 please

CarbonSignal 05-17-2012 12:30 AM
All pms replied, if any other query please let us know

captain-nok 05-22-2012 01:42 AM
what is the price on this?

A.J@CarbonSignal 05-22-2012 02:25 AM
Quote:
Originally Posted by captain-nok (Post 1730551)
what is the price on this?
Sending you a PM in abit!

Nut_N_Much 06-02-2012 08:42 PM
Same thing brother, In for some prices. PM Sent :stirthepot:

Huan'z 06-03-2012 01:07 AM
aj! when u gonna send me this kit?:)

wongk3 06-03-2012 01:29 AM
pm price shipped to 94030!

A.J@CarbonSignal 06-11-2012 12:11 AM
Quote:
Originally Posted by Huan'z (Post 1751424)
aj! when u gonna send me this kit?:)
Your order shipped and tracking number will be sent shortly :hello:

A.J@CarbonSignal 06-11-2012 12:18 AM
We've got few full kits (11PCS) in black CF ready IN STOCK so there is no leadtime involved, Anyone interested? :stirthepot:

Price for the full kit (11PCS) is $550 plus shipping.

Price for the full kit w/o kickplates (9PCS) is $475 plus shipping.

We can do special colors for additional cost as red, blue, kevlar and orange. Leadtime is 10 days for special orders!

sinceday1 06-11-2012 06:17 AM
Quote:
Originally Posted by A.J@CarbonSignal (Post 1765427)
We've got few full kits (11PCS) in black CF ready IN STOCK so there is no leadtime involved, Anyone interested? :stirthepot:

Price for the full kit (11PCS) is $550 plus shipping.

Price for the full kit w/o kickplates (9PCS) is $475 plus shipping.

We can do special colors for additional cost as red, blue, kevlar and orange. Leadtime is 10 days for special orders!
I'll take one w/o kickplates.

Check your PM AJ!

Huan'z 06-11-2012 02:47 PM
Quote:
Originally Posted by A.J@CarbonSignal (Post 1765421)
Your order shipped and tracking number will be sent shortly :hello:
Thanks thanks thanks!!!:)


Sent from my iPhone using Tapatalk

KaienZ34 06-14-2012 08:10 AM

^^^^reported

lhinojos 06-14-2012 02:16 PM
Anyone have pictures of this installed?

A.J@CarbonSignal 06-14-2012 02:27 PM
Quote:
Originally Posted by sinceday1 (Post 1765587)
I'll take one w/o kickplates.

Check your PM AJ!
Shipped and tracking number sent! :tup:

Quote:
Originally Posted by Huan'z (Post 1766340)
Thanks thanks thanks!!!:)
:tiphat:

Quote:
Originally Posted by lhinojos (Post 1771946)
Anyone have pictures of this installed?
Check previous pages many members posted pics of their kits.

Also check facebook link in my sig for more pics.


All times are GMT -5. The time now is 11:18 PM.
Page 13 of 17 « First 31112 13 1415 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2