Doo, if I would have looked at the picture I would have seen it. LOL Did they give you any price break?

Logo is on the lower right

NextLevel Performance

Those are special edition Recaro Sportster CS

heard this quite a lot. I almost bought a set for my old G35 until I read reviews.

Made me sad :(

It would be really hard to see why anyone would go for something outside of Recaro/Bride/Sparco, maybe Corbeau

The seat is pretty important for safety, much less aesthetic - why would u risk it?

if i ever ditch the nismo recaros it would be for . . . better Recaros. otherwise there's no point

EDIT:
Forgot about Buddy club, if they still exist. Had them in the S14, held up well for track days

it’s been long journey from my stock base Nissan 2017 370Z, red bride reclining seats ordered directly from Japan, waited over 6 month ..., but I enjoy every moment of modification process.

https://uploads.tapatalk-cdn.com/201...b9b87d1fd4.jpghttps://uploads.tapatalk-cdn.com/201...3280a17c18.jpghttps://uploads.tapatalk-cdn.com/201...b7eff22cd7.jpghttps://uploads.tapatalk-cdn.com/201...254f32cd4f.jpghttps://uploads.tapatalk-cdn.com/201...15d2b83d73.jpghttps://uploads.tapatalk-cdn.com/201...8c770252cc.jpghttps://uploads.tapatalk-cdn.com/201...355a92b0a1.jpghttps://uploads.tapatalk-cdn.com/201...534763ff46.jpghttps://uploads.tapatalk-cdn.com/201...1c1f99e207.jpghttps://uploads.tapatalk-cdn.com/201...ade9c0b60b.jpghttps://uploads.tapatalk-cdn.com/201...1cd0b4141d.jpghttps://uploads.tapatalk-cdn.com/201...6773bd1b46.jpghttps://uploads.tapatalk-cdn.com/201...3fd70408eb.jpg


Sent from my iPhone using Tapatalk

how the hell do you get in and out without a quick release/quick tilt wheel?

I have the bride gias II (super high bolster)

I just slide the seat ALL the way back and try my best... going in i put my *** in first and the swing my legs over

i think you should call up Speed Image USA and inquire about some Works Bell products

(DO NOT GET NRG)

They're local to you

I actually don't have much of a problem because I'm small (5'6 small frame), but I'm be sure to look into it if/when I want to get an after market steering wheel

u will be surprised, actually is easy to slide inside, am 5’7 188lbs, I don’t even need to slide the seat back to get inside the car, steering wheel I replaced with OEM Nismo steering wheel


Sent from my iPhone using Tapatalk

Status Seats (Pre- Power Agency Buyout) mounted on Planted Brackets.

Matching harnesses will be installed once my Amuse Harness Bar comes in.

https://imgur.com/gallery/PvcGOBw

How many of you struggled with giving up your heating and power reclining features?

LOL, not at all because.....Racecar!

Sent from my SM-G965U using Tapatalk

kinda regret buying the bride GIAS, i dont really recline and i want harness setup. so... if anyone wants a lightly used GIAS II lemme know ;)

:tup:

Recaro lx-f. These should come from factory. https://uploads.tapatalk-cdn.com/201...ad54c4f57f.jpg

Sent from my SM-N950W using Tapatalk

I'm willing to bet that you shave your armpits, arms and legs.

Hey guys I have a question. I'm running buddy club rails with Sparco bucket on OEM seat belt. How is your seat belt mount?
I made a bracket to lower the seat belt mount so I can feed the belt in the seat hole instead of going over the seat.

http://www.the370z.com/members/shara...120-074811.jpg

I still have a couple things I want to do with the interior. But I'm almost done.


http://www.the370z.com/members/voice...re105708-a.jpg

http://www.the370z.com/members/voice...-more-done.jpg

After going through all 18 pages of this thread, I'm still kinda uncertain as to what seat bases will work best to mount a pair of Recaro Pole Positions in a low position. I'm not a big guy, 5'9", 31" waist, 160 lbs, but I do want to be able to use a helmet at the track. Has anyone have anything good to say about the Buddy Club base & sliders paired with Pole Positions? TIA!

I'm in the same boat.. I'm looking for something to work with Pole Positions as well. Already have Planted brackets, going to order some sliders from Z1 and give it a go next week. If the seating position isnt where I want it, I plan on reaching out to Wedge Engineering to see what solutions they may have.

recaro rsg-k with a pci slider and base

https://live.staticflickr.com/65535/...8e3ecd80_c.jpg_BES6753 by brendan sobers, on Flickr

https://live.staticflickr.com/65535/...cd05db4d_c.jpg_BES6751 by brendan sobers, on Flickr

I pulled trigger on the buddy club base/slider combo. I haven't installed them yet as I'm waiting for the seats, but I will be sure to update the forum when I install them.

I also have a buddy club slider, paired with Sparco sprint. It works great. Waist is 32 and its a nice tight fit.

Here's mine. They're Braum seats. I color matched the stitching & piping to the car. Same with the seat belt harnesses.

i tried searching but does anyone know if all recaro aftermarket seats (not the nismo factory one) fit over the stock V2 nismo seat rail and slider. some of them look almost identical to the nismo seats I have in the car. I am just wondering the fact that there is lack of information on fitment for recaro means most aftermarket recaro seats fits directly.

afaik only the upper seat back on the nismo is a real produced by recaro part. the lower seat is nissan. So I wouldn't expect full recaro seats to bolt in. also I'm sure it would depend on what recaro seat you're trying to install no?

edit: you can see here even the juke recaro don't fit
the370z.com/exterior-interior/123966-swaping-out-seats-question-juke.html

here's mine

Just installed my Braum Elite X series with planted brackets.
https://i.postimg.cc/wxh7vbjL/20221207-185748.jpg

https://i.postimg.cc/VLm5bBJT/20221207-185735.jpg

I sit uncomfortably lower than the oem stock setup.
Does anyone know if I can add risers of any sort to this new Braum and Planted setup, so I can sit higher?

You should be able to on the rear of the bracket. There's a diy on here that's specs out spacers and longer bolts to do it to the oem seats. When I had oem, I did that mod

Ok kool. Gona check it out. Yea i was hoping to do the rear only, because I feel that the seats are angled backwards slightly for some reason.

I know this post is a bit old, but I've got the Buddy Club sliders with a side mounted Tillet B8 seat.

The brackets included don't provide the actual lowest or rear most position, so I had to fabricate brackets. Part of the issue is that the seat is too wide to fit between the sliders and adjustment bar at their widest position.



https://photos.app.goo.gl/Q7SvWGZv4nyV4Kqu7

https://photos.app.goo.gl/GxboSuxYgwpTYk1L7
https://lh3.googleusercontent.com/-N...-no?authuser=0

https://lh3.googleusercontent.com/hU...-no?authuser=0

Looks good but that OE shifter is killing your interior vibe. I have a M45 auto knob that is plug and play for sale and if pared with the manual shift boots on ebay it really cleans up that dated auto shift knob and ugly bezel area.

Funny you say this, I have just been looking at ways to spice up the auto shifter in my Z. Can you show me photos or link to what exactly is available for me to do this?

What seat brackets did you ise for this, and is the seat height close to factory? Ive heard its challenging to get the seats low enough.

Any reclineable seat is going to be pretty much impossible to get lower than stock due to the sliders on the bottom.

If you want to go lower, you need a bucket, mounted in fixed position. The angle of the seat will also substantially affect headroom.

I needed space to fit with a helmet. First tried a combo of Z1 side mounts and a Sparco EVO 2 US QRT. Got headroom but the seat back was angled back so much I had an uncomfortable time reaching either the pedals or steering wheels due to how far back it left me.

Swapped to a newer Sparco QRT EVO XL. It has a more vertical back, which solved the issue. Fit with helmet now, and everything else is in reach comfortably.

takeways:
If you want to go low, you will need to sacrifice with a fixed bucket or custom setup

test fit, test fit, test fit

Recaro Profi SPG XL
Z1 fixed side mounts
Parts from Schroth to attach the receptacle

6'1, about 180lbs

man the Recaros look great. Really wish I could fit in them properly