NISMO Titanium Shift Knob installed!!!!

happytheman · 06-24-2011, 10:36 PM

Question: For past aftermarket knobs that I've put on they tended to be loose and want to move either clock or counter clockwise (depending on it's mood). Are you guys experiencing that w/ the Nismo knob? Should I put a dab of loctite on the threads before installing?

FromG2Z · 06-24-2011, 10:50 PM

^ Happy, no issue with turning/spinning... just tighten down real good. Perhaps the existing loctite remaing on the shaft threads from the factory were sufficient

kenchan · 06-25-2011, 07:25 AM

Wat G2Z said. I did not need to use loctite.

kdo2milger · 06-25-2011, 07:37 AM

Quote:

Originally Posted by happytheman

Question: For past aftermarket knobs that I've put on they tended to be loose and want to move either clock or counter clockwise (depending on it's mood). Are you guys experiencing that w/ the Nismo knob? Should I put a dab of loctite on the threads before installing?

no need to use locktite

just use "good-n-tite" torque

Dustin@Z1 · 06-25-2011, 08:22 AM

The threads of the NISMO Shift Knobs are not metal like other brands. They are actually Nylon, similar to a Nylon Lock-nut. They should be fine and not free spin. It MAY develop this tendency if it is removed multiple times though.

happytheman · 06-25-2011, 12:27 PM

Cool! It should be here any day now and I'm getting

syntax1269 · 06-25-2011, 03:29 PM

looks like i will be doing this also... but need to get the B&M Short Throw Shifter and then put on the TI knob.. this way i can preserve the nylon threads..

kenchan · 06-27-2011, 03:00 PM

Quote:

Originally Posted by happytheman

Cool! It should be here any day now and I'm getting

so did you get this installed yet?

FromG2Z · 06-27-2011, 04:22 PM

^ exactly, also, I better get tons and oodles of rep points

happytheman · 06-27-2011, 11:21 PM

Quote:

Originally Posted by kenchan

so did you get this installed yet?

Ugh, I've been soo busy these last couple of days working a side job that is netting me an extra grand.

I'm all like

because I want to put them on, but also

because the parts look so sweet! They are beckoning to me, but man...I'm sooo wiped out after spending three to four hours crawling about in an attic cabling my wife's office building with five extra data lines yesterday and finishing all the run terminations and patch panel installation today after working for eight hours.

G2z, you will def get rep points, so no worries on that front!

FromG2Z · 06-28-2011, 08:33 AM

^ hehe... thanks happy

yeah the knob shouldn't take you too long, bro. You could probably do it in 20 min's or less, as long as you aren't breaking straps like Ken does

kenchan · 06-28-2011, 10:27 AM

Quote:

Originally Posted by happytheman

Ugh, I've been soo busy these last couple of days working a side job that is netting me an extra grand.

I'm all like

because I want to put them on, but also

because the parts look so sweet! They are beckoning to me, but man...I'm sooo wiped out after spending three to four hours crawling about in an attic cabling my wife's office building with five extra data lines yesterday and finishing all the run terminations and patch panel installation today after working for eight hours.

G2z, you will def get rep points, so no worries on that front!

woah, that sounds like a pretty intense job your doing up there in the attic. hope you dont get stung by some crazy spider.

CAN-ZED · 06-28-2011, 01:54 PM

well i replaced my stock shifter knob today with Black Nismo one.
was a little concerned after reading this thread, and yes i did run into similiar issues.
the stock one just wouldnt turn, so i tried to the duct tape trick.
It worked , but was still very difficult to turn, the leather wrap on stock one started to come off, but managed to save it minus the leather on both sides, leather piece down the middle survived and actually looks ok

new one on and very happy now, love the feel when shifting

(apologies for picture quality, Blackberry camera)

kenchan · 06-28-2011, 02:08 PM

CAN-ZED- looking good. i like how you put the shift pattern over the dummy switch cover thingie.

FromG2Z · 06-28-2011, 04:47 PM

Quote:

Originally Posted by CAN-ZED

well i replaced my stock shifter knob today with Black Nismo one.
was a little concerned after reading this thread, and yes i did run into similiar issues.
the stock one just wouldnt turn, so i tried to the duct tape trick.
It worked , but was still very difficult to turn, the leather wrap on stock one started to come off, but managed to save it minus the leather on both sides, leather piece down the middle survived and actually looks ok

new one on and very happy now, love the feel when shifting

(apologies for picture quality, Blackberry camera)

Looking good man!

So explain that last pic to me... the leather around the sides came off? So what's the surface remaining on either side of the stock knob???

06-24-2011, 10:36 PM	#121 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Question: For past aftermarket knobs that I've put on they tended to be loose and want to move either clock or counter clockwise (depending on it's mood). Are you guys experiencing that w/ the Nismo knob? Should I put a dab of loctite on the threads before installing? __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

06-24-2011, 10:50 PM	#122 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 17	^ Happy, no issue with turning/spinning... just tighten down real good. Perhaps the existing loctite remaing on the shaft threads from the factory were sufficient __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

06-25-2011, 12:27 PM	#126 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Cool! It should be here any day now and I'm getting __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

06-27-2011, 04:22 PM	#129 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 17	^ exactly, also, I better get tons and oodles of rep points __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

06-28-2011, 08:33 AM	#131 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 17	^ hehe... thanks happy yeah the knob shouldn't take you too long, bro. You could probably do it in 20 min's or less, as long as you aren't breaking straps like Ken does __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

06-25-2011, 07:25 AM	#123 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Wat G2Z said. I did not need to use loctite.

06-25-2011, 08:22 AM	#125 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 17	The threads of the NISMO Shift Knobs are not metal like other brands. They are actually Nylon, similar to a Nylon Lock-nut. They should be fine and not free spin. It MAY develop this tendency if it is removed multiple times though.

06-25-2011, 03:29 PM	#127 (permalink)
syntax1269 Base Member Join Date: May 2009 Location: 0.2 seconds in front Posts: 88 Drives: 370Z Touring S M6 Rep Power: 16	looks like i will be doing this also... but need to get the B&M Short Throw Shifter and then put on the TI knob.. this way i can preserve the nylon threads..

06-28-2011, 02:08 PM	#134 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	CAN-ZED- looking good. i like how you put the shift pattern over the dummy switch cover thingie.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo Titanium Shift Knob Open-O Design Installed	karotZ	40th Anniversary 370Z	22	03-04-2011 03:58 PM
FS: NISMO titanium shift knob	VancouverZ34	Parts for sale (Private Classifieds)	5	02-26-2011 08:43 AM
NISMO GT Titanium shift knob!	corner3garage	Body Interior/Exterior	4	01-16-2010 01:52 AM