![]() |
i used the 3m super strength and the contacted the pieces. Came out perfect. I basically rolled out some 3m tape and then used a razor blide to divide the
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#9 (permalink) |
A True Z Fanatic
Join Date: Sep 2009
Location: Atlanta, GA
Posts: 1,694
Drives: Carbon Fiber 370z
Rep Power: 19 ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
i used the 3m super strength and the contacted the pieces. Came out perfect. I basically rolled out some 3m tape and then used a razor blide to divide the pulled out tape in half. This needed to be done since the tape was wider then the area of the light it was being placed on. I divided the tape and started laying it on the 3rd brake light. Used a hair dryer to heat up the tape and metal of car and then contacted the pieces "which was harder then it sounds" and bolted the screw. Came out nice and only cost me 4 bucks and got it instant.... Nissan wanted 40 and i had to wait 5=10 business days... BWAHAHA and I have extra left over
![]()
__________________
![]() Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz. |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
wiring rear fog light as brake light | Parrotguy | Nissan 370Z Roadster (Convertible) | 12 | 09-03-2015 10:34 AM |
Brake light comes on after tune | Doyle rules | Tuning | 1 | 03-27-2011 12:54 PM |
brake light comes on during shifts | blacksheep | Nissan 370Z General Discussions | 7 | 10-02-2010 06:37 PM |
Anyone installed the rear fog light as a brake light on a roadster? | Lee123 | DIY Section (Do-It-Yourself) | 4 | 05-01-2010 07:53 PM |
Third brake light | Snakes709 | Exterior & Interior | 2 | 12-12-2009 07:24 PM |